Membrane processes have long been applied in different stages of microalgae cultivation and processing. These processes include microfiltration, ultrafiltration, dialysis, forward osmosis, membrane ...contactors and membrane spargers. They are implemented in many combinations, both as a standalone and as a coupled system (in membrane biomass retention photobioreactors (BR-MPBRs) or membrane carbonation photobioreactors (C-MPBRs). To provide sufficient background on these applications, an overview of membrane materials and membrane processes of interest in microalgae cultivation and processing is provided in this work first. Afterwards, discussion about specific aspects of membrane applications in microbial cultivation and harvesting is provided, including membrane fouling. Many of the membrane processes were shown to be promising options in microalgae cultivation. Yet, significant process optimizations are still required when they are applied to enable microalgae biomass bulk production to become competitive as a raw material for biofuel production. Recent developments of the coupled systems (BR-MPBR and C-MPBR) bring significant promises to improve the volumetric productivity of a cultivation system and the efficiency of inorganic carbon capture, respectively.
Display omitted
•The mechanism for removing nutrients via microalgae-bacteria consortia is discussed.•Light is an important operational parameter for efficiently removing nutrients.•Bio-flocculation ...using bacteria is a superior method for microalgal harvest.•Recent bioenergy production via microalgae-bacteria consortia is elaborated.
Conventional wastewater treatment using activated sludge cannot efficiently eliminate nitrogen and phosphorus, thus engendering the risk of water eutrophication and ecosystem disruption. Fortunately, a new wastewater treatment process applying microalgae-bacteria consortia has attracted considerable interests due to its excellent performance of nutrients removal. Moreover, some bacteria facilitate the harvest of microalgal biomass through bio-flocculation. Additionally, while stimulating the functional bacteria, the improved biomass and enriched components also brighten bioenergy production from the perspective of practical applications. Thus, this review first summarizes the current development of nutrients removal and mutualistic interaction using microalgae-bacteria consortia. Then, advancements in bio-flocculation are completely described and the corresponding mechanisms are thoroughly revealed. Eventually, the recent advances of bioenergy production (i.e., biodiesel, biohydrogen, bioethanol, and bioelectricity) using microalgae-bacteria consortia are comprehensively discussed. Together, this review will provide the ongoing challenges and future developmental directions for better converting nitrogen and phosphorus wastewater into bioenergy using microalgae-bacteria consortia.
Microalgae have been studied as natural resources for a number of applications, most particularly food, animal feed, biofuels, pharmaceuticals, and nutraceuticals. In addition to the intracellular ...compounds of interest, microalgae can also excrete various extracellular polymeric substances (EPS) into their immediate living environment during their life cycle to form a hydrated biofilm matrix. These microalgal EPS mainly consist of polysaccharides, proteins, nucleic acids and lipids. Most notably, EPS retain their stable matrix structure and form a 3-D polymer network for cells to interact with each other, and mediate their adhesion to surfaces. EPS also play a role as extracellular energy and carbon sinks. They are also abundant source of structurally and compositionally diverse biopolymers which possess unique bioactivities for special high-value applications, specifically as antivirals, antitumor agents, antioxidants, anticoagulants and anti-inflammatories. Their superior rheological properties also make microalgal EPS particularly useful in mechanical engineering (e.g., biolubricants and drag reducers) and food science/engineering (e.g., thickener and preservatives) applications. The chemical composition and structure of EPS appear to correlate with their applications, but the fundamentals of such relationship are not well understood. This article summarizes previous research on microalgal EPS derived from green algae, diatoms and red algae, including compositions/functions/structure, production, and potential applications. The importance of exopolysaccharides and EPS proteins, with their particular metabolic characteristics, are also described because of their potential high-value applications. This review concludes with potential future research areas of microalgal EPS.
Microalgae have been widely reported as a promising source of biofuels, mainly based on their high areal productivity of biomass and lipids as triacylglycerides and the possibility for cultivation on ...non-arable land. The isolation and selection of suitable strains that are robust and display high growth and lipid accumulation rates is an important prerequisite for their successful cultivation as a bioenergy source, a process that can be compared to the initial selection and domestication of agricultural crops. We developed standard protocols for the isolation and cultivation for a range of marine and brackish microalgae. By comparing growth rates and lipid productivity, we assessed the potential of subtropical coastal and brackish microalgae for the production of biodiesel and other oil-based bioproducts. This study identified Nannochloropsis sp., Dunaniella salina and new isolates of Chlorella sp. and Tetraselmis sp. as suitable candidates for a multiple-product algae crop. We conclude that subtropical coastal microalgae display a variety of fatty acid profiles that offer a wide scope for several oil-based bioproducts, including biodiesel and omega-3 fatty acids. A biorefinery approach for microalgae would make economical production more feasible but challenges remain for efficient harvesting and extraction processes for some species.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
Microalgal biomass seems to be a promising feedstock for biofuel generation. Microalgae have relative high photosynthetic efficiencies, high growth rates, and some species can thrive in brackish ...water or seawater and wastewater from the food- and agro-industrial sector. Today, the main interest in research is the cultivation of microalgae for lipids production to generate biodiesel. However, there are several other biological or thermochemical conversion technologies, in which microalgal biomass could be used as substrate. However, the high protein content or the low carbohydrate content of the majority of the microalgal species might be a constraint for their possible use in these technologies. Moreover, in the majority of biomass conversion technologies, carbohydrates are the main substrate for production of biofuels. Nevertheless, microalgae biomass composition could be manipulated by several cultivation techniques, such as nutrient starvation or other stressed environmental conditions, which cause the microalgae to accumulate carbohydrates. This paper attempts to give a general overview of techniques that can be used for increasing the microalgal biomass carbohydrate content. In addition, biomass conversion technologies, related to the conversion of carbohydrates into biofuels are discussed.
In this paper, the influence of culture conditions (irradiance, temperature, pH, and dissolved oxygen) on the photosynthesis rate of
Scenedesmus almeriensis
cultures is analyzed. Short-run ...experiments were performed to study cell response to variations in culture conditions, which take place in changing environments such as outdoor photobioreactors. Experiments were performed by subjecting diluted samples of cells to different levels of irradiance, temperature, pH, and dissolved oxygen concentration. Results demonstrate the existence of photoinhibition phenomena at irradiances higher than 1,000 μE/m
2
s; in addition to reduced photosynthesis rates at inadequate temperatures or pH—the optimal values being 35 °C and 8, respectively. Moreover, photosynthesis rate reduction at dissolved oxygen concentrations above 20 mg/l is demonstrated. Data have been used to develop an integrated model based on considering the simultaneous influence of irradiance, temperature, pH, and dissolved oxygen. The model fits the experimental results in the range of culture conditions tested, and it was validated using data obtained by the simultaneous variation of two of the modified variables. Furthermore, the model fits experimental results obtained from an outdoor culture of
S. almeriensis
performed in an open raceway reactor. Results demonstrate that photosynthetic efficiency is modified as a function of culture conditions, and can be used to determine the proximity of culture conditions to optimal values. Optimal conditions found (
T
= 35 °C, pH = 8, dissolved oxygen concentration <20 mg/l) allows to maximize the use of light by the cells. The developed model is a powerful tool for the optimal design and management of microalgae-based processes, especially outdoors, where the cultures are subject to daily culture condition variations.
Celotno besedilo
Dostopno za:
CEKLJ, DOBA, EMUNI, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SBMB, SBNM, UILJ, UKNU, UL, UM, UPUK
In the current literature, the life cycle, technoeconomic, and resource assessments of microalgae-based biofuel production systems have relied on growth models extrapolated from laboratory-scale ...data, leading to a large uncertainty in results. This type of simplistic growth modeling overestimates productivity potential and fails to incorporate biological effects, geographical location, or cultivation architecture. This study uses a large-scale, validated, outdoor photobioreactor microalgae growth model based on 21 reactor- and species-specific inputs to model the growth of Nannochloropsis . This model accurately accounts for biological effects such as nutrient uptake, respiration, and temperature and uses hourly historical meteorological data to determine the current global productivity potential. Global maps of the current near-term microalgae lipid and biomass productivity were generated based on the results of annual simulations at 4,388 global locations. Maximum annual average lipid yields between 24 and 27 m ³·ha ⁻¹·y ⁻¹, corresponding to biomass yields of 13 to 15 g·m ⁻²·d ⁻¹, are possible in Australia, Brazil, Colombia, Egypt, Ethiopia, India, Kenya, and Saudi Arabia. The microalgae lipid productivity results of this study were integrated with geography-specific fuel consumption and land availability data to perform a scalability assessment. Results highlight the promising potential of microalgae-based biofuels compared with traditional terrestrial feedstocks. When water, nutrients, and CO ₂ are not limiting, many regions can potentially meet significant fractions of their transportation fuel requirements through microalgae production, without land resource restriction. Discussion focuses on sensitivity of monthly variability in lipid production compared with annual average yields, effects of temperature on productivity, and a comparison of results with previous published modeling assumptions.
The elemental stoichiometry of microalgae reflects their underlying macromolecular composition and influences competitive interactions among species and their role in the food web and ...biogeochemistry. Here we provide a new estimate of the macromolecular composition of microalgae using a hierarchical Bayesian analysis of data compiled from the literature. The median macromolecular composition of nutrient-sufficient exponentially growing microalgae is 32.2% protein, 17.3% lipid, 15.0% carbohydrate, 17.3% ash, 5.7% RNA, 1.1% chlorophyll-a and 1.0% DNA as percent dry weight. Our analysis identifies significant phylogenetic differences in macromolecular composition undetected by previous studies due to small sample sizes and the large inherent variability in macromolecular pools. The phylogenetic differences in macromolecular composition lead to variations in carbon-to-nitrogen ratios that are consistent with independent observations. These phylogenetic differences in macromolecular and elemental composition reflect adaptations in cellular architecture and biochemistry; specifically in the cell wall, the light harvesting apparatus, and storage pools.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
•Bead milling is an energy efficient and mild microalgae disintegration method.•A smaller bead size results in a lower specific energy consumption.•The specific energy consumption was decreased from ...>1.7 to <0.5kWhkgDW−1.•Product yields were unaffected using smaller bead sizes.
The disintegration of three industry relevant algae (Chlorella vulgaris, Neochloris oleoabundans and Tetraselmis suecica) was studied in a lab scale bead mill at different bead sizes (0.3–1mm). Cell disintegration, proteins and carbohydrates released into the water phase followed a first order kinetics. The process is selective towards proteins over carbohydrates during early stages of milling. In general, smaller beads led to higher kinetic rates, with a minimum specific energy consumption of ⩽0.47kWhkgDW−1 for 0.3mm beads. After analysis of the stress parameters (stress number and stress intensity), it appears that optimal disintegration and energy usage for all strains occurs in the 0.3–0.4mm range. During the course of bead milling, the native structure of the marker protein Rubisco was retained, confirming the mildness of the disruption process.
Display omitted
•Adaptive evolution was performed for Chlorella sp. to remove phenol in wastewater.•The resulting strain was obtained after 31 cycles for about 95d.•The resulting strain could grow ...under 500mg/L and 700mg/L phenol.•The growth rates of resulting strain were more than twice of those of original one.•500mg/L phenol could be fully removed in 7d by the resulting strain.
Microalgae are highly efficient photosynthesis cell factories for CO2 capture, biofuel productions and wastewater treatment. Phenol is a typical environmental contaminant. Microalgae normally have a low tolerance for, and a low degradation rate to, high concentration of phenol. Adaptive laboratory evolution was performed for phenolic wastewater treatment by Chlorella sp. The resulting strain was obtained after 31 cycles (about 95d) under 500mg/L phenol as environmental stress. It could grow under 500mg/L and 700mg/L phenol without significant inhibition. The maximal biomass concentrations of the resulting strain at day 8 were 3.40g/L under 500mg/L phenol and 2.70g/L under 700mg/L phenol, respectively. They were more than two times of those of the original strain. In addition, 500mg/L phenol was fully removed by the resulting strain in 7d when the initial cell density was 0.6g/L.
PDF
