The quest for bacterial survival is exemplified by spores formed by some
members. They turn up everywhere one looks, and their ubiquity reflects adaptations to the stresses bacteria face. Spores are ...impactful in public health, food safety, and biowarfare. Heat resistance is the hallmark of spores and is countered principally by a mineralized gel-like protoplast, termed the spore core, with reduced water which minimizes macromolecular movement/denaturation/aggregation. Dry heat, however, introduces mutations into spore DNA. Spores have countermeasures to extreme conditions that are multifactorial, but the fact that spore DNA is in a crystalline-like nucleoid in the spore core, likely due to DNA saturation with small acid-soluble spore proteins (SASPs), suggests that reduced macromolecular motion is also critical in spore dry heat resistance. SASPs are also central in the radiation resistance characteristic of spores, where the contributions of four spore features-SASP; Ca
, with pyridine-2,6-dicarboxylic acid (CaDPA); photoproduct lyase; and low water content-minimize DNA damage. Notably, the spore environment steers UV photochemistry toward a product that germinated spores can repair without significant mutagenesis. This resistance extends to chemicals and macromolecules that could damage spores. Macromolecules are excluded by the spore coat which impedes the passage of moieties of ≥10 kDa. Additionally, damaging chemicals may be degraded or neutralized by coat enzymes/proteins. However, the principal protective mechanism here is the inner membrane, a compressed structure lacking lipid fluidity and presenting a barrier to the diffusion of chemicals into the spore core; SASP saturation of DNA also protects against genotoxic chemicals. Spores are also resistant to other stresses, including high pressure and abrasion. Regardless, overarching mechanisms associated with resistance seem to revolve around reduced molecular motion, a fine balance between rigidity and flexibility, and perhaps efficient repair.
The primary objective of this study was to identify the molecular signals present in arbuscular mycorrhizal (AM) germinated spore exudates (GSEs) responsible for activating nuclear Ca2+ spiking in ...the Medicago truncatula root epidermis.
Medicago truncatula root organ cultures (ROCs) expressing a nuclear-localized cameleon reporter were used as a bioassay to detect AM-associated Ca2+ spiking responses and LC-MS to characterize targeted molecules in GSEs.
This approach has revealed that short-chain chitin oligomers (COs) can mimic AM GSE-elicited Ca2+ spiking, with maximum activity observed for CO4 and CO5. This spiking response is dependent on genes of the common SYM signalling pathway (DMI1/DMI2) but not on NFP, the putative Sinorhizobium meliloti Nod factor receptor. A major increase in the CO4/5 concentration in fungal exudates is observed when Rhizophagus irregularis spores are germinated in the presence of the synthetic strigolactone analogue GR24. By comparison with COs, both sulphated and nonsulphated Myc lipochito-oligosaccharides (LCOs) are less efficient elicitors of Ca2+ spiking in M. truncatula ROCs.
We propose that short-chain COs secreted by AM fungi are part of a molecular exchange with the host plant and that their perception in the epidermis leads to the activation of a SYM-dependent signalling pathway involved in the initial stages of fungal root colonization.
Today, indoor mold and moisture, and their associated health effects, are a society-wide problem. The economic consequences of indoor mold and moisture are enormous. Their global dimension has been ...emphasized in several recent international publications, stressing that the most important means for avoiding adverse health effects is the prevention (or minimization) of persistent dampness and microbial growth on interior surfaces and in building structures. This book aims to describe the fundamentals of indoor mold growth as a prerequisite to tackle mold growth in the existing building stock as well as in future energy efficient buildings. It brings together different disciplinary points of view on indoor mold, ranging from physics and material science to microbiology and health sciences. The contents have been outlined according to three main issues: Fundamentals, particularly addressing the crucial roles of water and materials, Health, including a state-of-the-art description of the health-related effects of indoor molds, and Strategies, integrating remediation, prevention and policies.
Sporulation in Bacillus subtilis involves an asymmetric cell division followed by differentiation into two cell types, the endospore and the mother cell. The endospore coat is a multilayered shell ...that protects the bacterial genome during stress conditions and is composed of dozens of proteins. Recently, fluorescence microscopy coupled with high-resolution image analysis has been applied to the dynamic process of coat assembly and has shown that the coat is organized into at least four distinct layers. In this Review, we provide a brief summary of B. subtilis sporulation, describe the function of the spore surface layers and discuss the recent progress that has improved our understanding of the structure of the endospore coat and the mechanisms of coat assembly.
Celotno besedilo
Dostopno za:
DOBA, IZUM, KILJ, NUK, PILJ, PNG, SAZU, SIK, UILJ, UKNU, UL, UM, UPUK
The global concerns regarding the emergence of fungicide-resistant strains and the impact of the excessive use of fungicidal practises on our health, food, and environment have increased, leading to ...a demand for alternative clean green technologies as treatments. Photosensitization is a treatment that utilises a photosensitiser, light and oxygen to cause cell damage to microorganisms. The effect of photosensitization mediated by curcumin on Aspergillus niger, Aspergillus flavus, Penicillium griseofulvum, Penicillium chrysogenum, Fusarium oxysporum, Candida albicans and Zygosaccharomyces bailii was investigated using three methods. The viability of spores/cells suspended in aqueous buffer using different concentrations of curcumin solution (100–1000μM) and light dose (0, 24, 48, 72 and 96J/cm2) were determined. Spraying curcumin solution on inoculated surfaces of agar plates followed by irradiation and soaking spores/cells in curcumin solution prior to irradiation was also investigated. In aqueous mixtures, photosensitised spores/cells of F. oxysporum and C. albicans were inhibited at all light doses and curcumin concentrations, while inactivation of A. niger, A. flavus P. griseofulvum, P. chrysogenum and Z. bailii were highly significant (P<0.001) reduced by 99%, 88.9%, 78%, 99.7% and 99.2% respectively. On the surface of agar plates, spores/cells exposed to a light dose of 360J/cm2 sprayed with curcumin at 800μM showed complete inhibition for A. niger, F. oxysporum, C. albicans and Z. bailii, while A. flavus P. griseofulvum, and P. chrysogenum reduced by 75%, 80.4% and 88.5% respectively. Soaking spores/cells with curcumin solution prior to irradiation did not have a significant effect on the percentage reduction. These observations suggest that a novel photosensitization mediated curcumin treatment is effective against fungal spores/cells and the variation of percentage reduction was dependent on curcumin concentration, light dosage and fungal species.
•Photosensitization demonstrated broad spectrum fungicidal activity•The photosensitization effect was dependent on Curcumin, light dose and fungal species.•F. oxysporum and C. albicans were completely inhibited with Photosensitization mediated curcumin.•Soaking spores in curcumin solution prior to irradiation did not increase inhibition.•Spraying curcumin before irradiation can be effective in disinfecting surfaces.
Bacterial spores are a major challenge in industrial decontamination processes owing to their extreme resistance. High-pressure (HP) of 150 MPa at 37 °C can trigger the germination of spores, making ...them lose their extreme resistance. Once their resistance is lost, germinated spores can easily be inactivated by a mild decontamination step. The implementation of this gentle germination-inactivation strategy is hindered by the presence of a subpopulation of so-called high-pressure superdormant (HPSD) spores, which resist germination or germinate only very slowly in response to HP. It is essential to understand the properties of HPSD spores and the underlying causes of superdormancy to tackle superdormant spores and further develop germination-inactivation strategies involving HP. This study investigated factors influencing the prevalence of HPSD spores and successfully isolated them by combining buoyant density centrifugation and fluorescence-activated cell sorting, which allowed further characterisation of HPSD spores for the first time. The prevalence of HPSD spores was shown to be strongly dependent on the HP dwell time, with increasing treatment times reducing their prevalence. Spore mutants lacking major germinant receptors further showed a highly increased prevalence of HPSD spores; 93% of the spores remained dormant even after a prolonged HP dwell time of 40 min. In contrast to nutrient germination, sublethal heat treatment of 75 °C for 30 min prior to pressure treatment did not induce spore activation and increase germination.
The isolated HPSD spores did not show visible structural differences compared to the initial dormant spores when investigated with transmission electron microscopy. Re-sporulated HPSD spores showed similar germination capacity compared to the initial dormant spores, indicating that HPSD spores are most likely not genetically different from the rest of the population. Moreover, the majority of HPSD spores germinated when exposed a second time to the same germination treatment; however, the germination capacity was lower than that of the initial population. The fact that the majority of spores lost superdormancy when exposed a second time to the same trigger makes it unlikely that there is one factor that determines whether a spore germinates with a certain HP treatment or not. Instead, it seems possible that there are other reversible or cumulative causes. This study investigated the factors influencing spore HP superdormancy to improve the understanding of HPSD spores with regard to their stability, germination capacity, and potential underlying causes of spore HP superdormancy. This knowledge will contribute to the development of HP-based germination-inactivation strategies for gentle but effective spore control.
•High-pressure superdormant (HPSD) bacterial spores were isolated.•The stability, microscopic structure, and germination capacity were characterised.•HPSD spores have similar size and cortex width compared to dormant spores.•Spore high-pressure superdormancy is most likely not due to a genetic change.•The cause of superdormancy is likely cumulative or transient.
Summary
Bacillus species are widely recognized as good industrial platform strains, which can produce a variety of valuable products including enzymes and functional proteins. Bacillus expression ...systems gain various competitive edges over other expression systems, with respect to nontoxicity, convenience for gene modification and high yield of target proteins. Recently, a number of Bacillus expression systems have been developed, and various strategies were conducted to improve the yields of target proteins. In this review, we focused on the strategies of host strain optimization for heterologous protein production, including secretion pathway optimization, RNA and protein stability enhancement, cell growth facilitation, genome streamlining and transcriptional regulator engineering. In addition, Bacillus spore surface display and food‐grade expression systems were developed to expand the application of Bacillus expression system in recent years. Finally, the challenges and prospects of Bacillus expression system were discussed regarding the recent progresses, challenges and trends in this field.
The geochemical carbon cycle is strongly influenced by life on land, principally through the effects of carbon sequestration and the weathering of calcium and magnesium silicates in surface rocks and ...soils. Knowing the time of origin of land plants and animals and also of key organ systems (e.g. plant vasculature, roots, wood) is crucial to understand the development of the carbon cycle and its effects on other Earth systems. Here, we compare evidence from fossils with calibrated molecular phylogenetic trees (timetrees) of living plants and arthropods. We show that different perspectives conflict in terms of the relative timing of events, the organisms involved and the pattern of diversification of various groups. Focusing on the fossil record, we highlight a number of key biases that underpin some of these conflicts, the most pervasive and far-reaching being the extent and nature of major facies changes in the rock record. These effects probably mask an earlier origin of life on land than is evident from certain classes of fossil data. If correct, this would have major implications in understanding the carbon cycle during the Early Palaeozoic.
PDF
