(UL)
-
Analiza dinamične omočljivosti premaza iz polidimetilsiloksana in hidrofobizirane silike = Wickability analysis of the polydimethylsiloxane-silica coatingAvguštinčič, Mitja ...Boiling heat transfer phenomena strongly relates with interactions between the working fluid and the heated surface. Static contact angle has already demonstrated to affect the heat transfer ... coefficient and critical heat flux during the nucleate pool boiling. However, boiling is highly dynamic process and the contact angle alone is not an adequate measure of wickability. This article presents the development of wickability measurement system that is based on tracking the volume of water being drawn from a capillary tube and into the surface. A high-speed camera records the surface level with 1000 fps and a spatial resolution of 15.7 %m per pixel. Measurements were performed on steel samples, coated with polydimethylsiloxane-silica coating. The coated samples were first annealed at temperatures between 500 °C and 850 °C to achieve variety of static contact angles (between 129.8 ° and <1 °) while the same surface topography and porosity was kept constant. The highest wicked volume flux (7 mm s.-1) was measured on super-hydrophilic surface. By increasing the static contact angle, the wicked volume flux decreased and reached 0 mm s-1 for a surface with a static contact angle of 78 °. The presented method is useful for characterization of the wickability of hydrophilic surfaces. Unlike the static contact angle, the wicked volume flux covers the effects of micro and nanostructures, shape, permeability, and porosity of the surface. All of these parameters play an important role in phase-change heat transfer.Vir: Svet strojništva. - ISSN 1855-6493 (Letn. 4, št. 4/5, okt.-nov. 2015, str. 4-9)Vrsta gradiva - članek, sestavni delLeto - 2015Jezik - slovenskiCOBISS.SI-ID - 14497819
Avtor
Avguštinčič, Mitja |
Redenšek, Kristina |
Rožman, Nejc, 1995- |
Zupančič, Matevž, 1990- |
Golobič, Iztok
Teme
wicked volume flux |
static contact angle |
hydrophilic surfaces |
enhanced heat transfer |
hitrost omočljivosti |
statični kot omočenja |
hidrofilne površine |
izboljšan prenos toplote
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Avguštinčič, Mitja | |
Redenšek, Kristina | |
Rožman, Nejc, 1995- | 51897 |
Zupančič, Matevž, 1990- | 36685 |
Golobič, Iztok | 05566 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: