-
Response analysis of a scraper conveyor under chain faults based on MBD-DEM-FEMWang, Zisheng ...To tackle the difficulty in obtaining the response data of chain and bulk coal under chain faults, this paper uses a new method for the fault simulation of scraper chains based on the coupling of ... multi-body dynamics (MBD), discrete element method (DEM), and finite element method (FEM). With the force and stacking angle as response values, the contact parameters of bulk coal were revised using a rotary transport test. The simplified DEM-MBD model was verified from the resistance using the point-by-point method. The static structure model of the chain was verified by the chain tensile experiment. The DEM-MBD coupling results show that when the chain is stuck or broken, the dynamic properties of the chain and bulk coal fluctuate sharply, and the wear of the medium plate increases. Based on the DEM-MBD coupling results and the DEM-FEM unidirectional coupling, the stress, strain and life were acquired, and were verified experimentally. Regarding the fracture, the Plackett-Burman test was used to determine that the crack depth, initial angle, and tensile load significantly affect the stress intensity factor (SIF). The quadratic model between significant factors and SIF was constructed using the response surface method, which provides a reference for the simulation of the scraper conveyor, the fault mechanism, and the optimization of the design of the chain.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 67, no. 10, Okt. 2021, str. 501-515)Vrsta gradiva - članek, sestavni delLeto - 2021Jezik - angleškiCOBISS.SI-ID - 82637059
Avtor
Wang, Zisheng |
Li, Bo |
Liang, Chao, strojnik |
Wang, Xuewen |
Li, Jiahao
Teme
multi-body dynamics |
discrete element method |
finite element method |
scraper chain fault |
stress intensity factor |
response surface method |
dinamika več teles |
metoda diskretnih elementov |
metoda končnih elementov |
okvara verige strgalnega transporterja |
faktor intenzivnosti napetosti |
metoda odzivnih površin
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 67, no. 10, Okt. 2021, str. 501-515)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Wang, Zisheng | ![]() |
Li, Bo | ![]() |
Liang, Chao, strojnik | ![]() |
Wang, Xuewen | ![]() |
Li, Jiahao | ![]() |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.