The aim of this study was to evaluate the effect of bidirectional insertion on axial pullout strength of tapered run out (TRO), traditional negative profile (TNP) and positive profile (PP) pins.  Cadaveric adult canine tibiae were harvested. Tapered run out pins (Group 1) were inserted unidirectionally to the desired position; bidirectionally past the desired position, then withdrawn to the desired position (Group 2); and bidirectionally as described for Group 2, repeated twice (Group 3). Traditional negative profile pins (Group 4-6) and PP pins (Group 9-11) were placed in the same manner. Tapered run out (Group 7), TNP (Group 8) and PP pins (Group 12) were driven unidirectionally such that the shaft of the pin violated the cis-cortex. A servohydraulic testing machine extracted the pins and measured axial peak pullout strength.  Positive profile pins had significantly greater pullout strength than TRO and TNP pins placed unidirectionally to the desired position. Method of insertion had no effect on peak pullout strength of TNP pins. TRO and PP pins inserted unidirectionally to the desired position had significantly greater peak pullout strengths than insertion bidirectionally or if the shaft of the pin violated the cis-cortex.  The authors recommend that pins used for external skeletal fixation should be placed unidirectionally to the desired position with fluoroscopic guidance, intra-operative depth gauge measurements or measurements from preoperative radiographs. Repositioning pins results in loss of peak pullout strength with TRO and PP pins.