The ALICE experiment uses an optical read-out protocol called Detector Data Link (DDL) to connect the detectors with the computing clusters of Data Acquisition (DAQ) and High-Level Trigger (HLT). The interfaces of the clusters to these optical links are realized with FPGA-based PCI-Express boards. The High-Level Trigger is a computing cluster dedicated to the online reconstruction and compression of experimental data. It uses a combination of CPU, GPU and FPGA processing. For Run 2, the HLT has replaced all of its previous interface boards with the Common Read-Out Receiver Card (C-RORC) to enable read-out of detectors at high link rates and to extend the pre-processing capabilities of the cluster. The new hardware also comes with an increased link density that reduces the number of boards required. A modular firmware approach allows different processing and transport tasks to be built from the same source tree. A hardware pre-processing core includes cluster finding already in the C-RORC firmware. State of the art interfaces and memory allocation schemes enable a transparent integration of the C-RORC into the existing HLT software infrastructure. Common cluster management and monitoring frameworks are used to also handle C-RORC metrics. The C-RORC is in use in the clusters of ALICE DAQ and HLT since the start of LHC Run 2.