Large-scale coal mining is being carried out in Tete province, Mozambique. This area is also being planned to become a large coal fired power production hub serving electricity to neighboring countries in southern Africa. Thus, huge amounts of coal will be burned, resulting in the generation of a large quantity of coal ash. High concentrations of hazardous elements are often released from coal and coal ash causing negative impacts to human health and the environment. Therefore, it is important to understand the possibility of hazardous elements leaching. Aqueous batch leaching experiments under ambient conditions were conducted using six coal samples and their ash. Most of the coal leached very low concentrations of hazardous elements. However, an absence of carbonate minerals gave rise to higher acidity levels. This resulted in elevated leaching concentrations of manganese and iron, regardless of their contents. Burning coal resulted in higher contents of hazardous elements in the ash. However, leaching concentrations of most of the elements from the ash samples were still lower than the environmental standards. Chromium and manganese were enriched in slightly acidic leachates regardless of their contents while higher arsenic than the permitted level was leached from the ash containing the highest arsenic content that generated neutral pH leachate. These findings highlight a possibility of hazardous elements contamination from Mozambican coal and coal ash. Therefore, the storage of coal and disposal of coal wastes and ash in Tete Province should be done carefully and monitored to avoid the contamination in the region. •Leaching properties of hazardous elements from coal and coal ash are different.•Coal ash has higher leachability than its parent coal.•Leachate with lower pH promotes the mobility of some hazardous elements.•There is a possibility of hazardous element contamination from coal and coal ash.