Akademska digitalna zbirka SLovenije - logo
E-viri
Celotno besedilo
Recenzirano
  • Uncertainty quantification ...
    Soyler, Israfil; Zhang, Kai; Duwig, Christophe; Jiang, Xi; Karimi, Nader

    International journal of hydrogen energy, 05/2023, Letnik: 48, Številka: 38
    Journal Article

    Green ammonia is a candidate fuel to decarbonise shipping and other industries. However, ammonia features a lower reactivity compared to conventional fuels and is therefore difficult to burn. To resolve this issue, thermo-catalytic cracking of ammonia using waste heat is often employed to produce NH3/H2/N2 blends as fuel. However, on-site operational variations in this process can become sources of uncertainty in the fuel composition, causing randomness of the flame's physicochemical properties and challenging flame stability. In the present work, a surrogate model is built using the polynomial chaos expansion (PCE) method to investigate the impact of fuel composition variability on combustion characteristics at different operating conditions. Impacts of 1.5% deviation in the fuel composition on the flame properties for different initial pressures (Pi) and unburnt fuel temperatures (Tu) are investigated for a wide range of equivalence ratios covering lean and rich mixtures. The uncertainty effects defined by the coefficient of variation (COV) fluctuate for equivalence ratios greater than 1.1, while no fluctuation is observed in COV for near stoichiometric combustion conditions. It is shown that H2 variation in the fuel blend has the strongest effect (over 80%) on the uncertainty of all investigated physicochemical properties of the flame. The least affected property is the adiabatic flame temperature with variations of about 2.5% in richer fuel conditions. The results further show that preheating of the reactants can significantly reduce the COV of laminar flame speed. The consequences of these uncertainties upon different combustion technologies are then discussed and it is argued that moderate and intense low oxygen dilution (MILD) and colourless distributed combustion (CDC) technology may remain resilient. •Fuel rich mixtures are more affected by small variations in blend composition.•Uncertainties in the blend composition can significantly increase NO formation.•Hydrogen content of the blend is most influential upon combustion uncertainties.•Adiabatic flame temperature is least affected by the uncertainties in blend composition.•MILD and CDC technologies are expected to be resilient to the effects of uncertainties.