Concentrated suspensions of nanoparticles subjected to transport or shear forces are commonly encountered in many processes where particles are likely to undergo processes of aggregation and fragmentation under physico-chemical interactions and hydrodynamic forces. This study is focused on the analysis of the behavior of colloidal silica in dense suspensions subjected to hydrodynamic forces in conditions of destabilization. A colloidal silica suspension of particles with an initial size of about 80 nm was used. The silica suspension concentration was varied between 3% and 20% of weight. The phenomenon of aggregation was observed in the absence of any other process such as precipitation and the destabilization of the colloidal suspensions was obtained by adding sodium chloride salt. The experiments were performed in a batch agitated vessel. The evolution of the particle size distributions versus time during the process of aggregation was particularly followed on-line by acoustic spectroscopy in dense conditions. Samples were also analyzed after an appropriate dilution by laser diffraction. The results show the different stages of the silica aggregation process whose kinetic rates depend either on physico-chemical parameters or on hydrodynamic conditions. Then, the study is completed by a numerical study based on the population balance approach. By the fixed pivot technique of Kumar and Ramkrishna 1996. On the solution of population balance equations by discretization—I. A fixed pivot technique. Chemical Engineering Science 51 (8), 1311–1332, the hypothesis on the mechanisms of the aggregation and breakage processes were justified. Finally, it allows a better understanding of the mechanisms of the aggregation process under flowing conditions.