•Biomass gasification combined with SOFC–GT hybrid system was studied.•Syngas hot cleaning unit is used in order to improve the efficiency of the system.•Energy integration in order to recover the maximum heat available inside the process.•Multi-objective optimization maximizing the efficiency and minimizing the capital investment costs. Within the context of sustainable energy supply and CO2 emissions reduction a Solid Oxide Fuel Cell (SOFC) – gas turbine hybrid system, fuelled with gasified woody biomass is studied in detail for small and medium scale applications (100kWth,BM and 8MWth,BM of dry biomass input). The system consists of an air dryer unit, a gasifier, a hot cleaning section made of a particulate removal unit (cyclone and candle filter) and a two-stage tar removal unit, a SOFC and a gas turbine with optional CO2 capture. This modern technology has the advantage of using a renewable and CO2-neutral source and to be economically competitive at medium scales. The competitiveness of different process options is systematically compared by applying a coherent approach combining flowsheeting, energy integration and economic evaluation in a multi-objective optimization framework. This analysis reveals the importance of process integration maximizing the heat recovery and valorizing the waste heat, by cogeneration for example. The studied process options include direct and indirect circulating fluidized bed gasifier (using respectively oxygen or steam as gasification agent) and Viking gasifier, atmospheric or pressurized systems and optional pre-reforming in the hot gas cleaning. To close the thermal energy balance, a fraction of the produced syngas can be burnt. The energy integration results reveal that the steam production for the gasification and reforming are key parameters (S/B and S/C ratio) defining the process performance. A multi-objective optimization maximizing the efficiency and minimizing the capital investment costs is performed with respect to the operating conditions and the process configuration in order to assess the trade-offs and identify optimal process designs. The analysis shows the potential of the system converting woody biomass into electricity with an energy efficiency greater than 70%.