-
Modelling and control of a fixed calliper-based electronic wedge brakeAhmad, Fauzi ...This paper presents a new design of an electronic fixed calliper-based wedge brake system. The movement of both sides of the brake piston is activated by a wedge block mechanism. The proposed fixed ... calliper-based electronic wedge brake system is a class of hydraulic-free device. The mechanism consists of two sets of wedge blocks, a ball screw drive shaft, a sliding beam and an electric motor. In this mechanism, the rotation of the shaft of the electric motor is converted into linear motion by using a ball screw drive shaft while the linear motion of the drive shaft will force the sliding beam to be displaced linearly. This will activate the wedge mechanism, which will cause the pad to be displaced tangentially to the disc brake. The movement of the pad in pressing the disc will generate clamping force and produce brake torque when the wheel rotates. In this study, the mathematical model of the system that generates the clamping force was identified. The model was based on a second order transfer function. The proposed mathematical model was then validated experimentally using a brake test rig installed with several sensors and input-output (IO) device. The performance of the brake mechanism in term of rotational input of the drive shaft and clamping force produced by the brake were observed. Accordingly, a torque tracking proportional-integral-derivative (PID) control of the system was proposed and studied through simulation and experiment. Comparisons between experimental results and model responses were made. It is found that the trend between simulation results and experimental data are similar, with an acceptable level of error.Source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 63, no. 3, Mar. 2017, str. 181-190, SI 26)Type of material - article, component partPublish date - 2017Language - englishCOBISS.SI-ID - 15377947
Author
Ahmad, Fauzi |
Hudha, Khisbullah |
Mazlan, Saiful Amri |
Jamaluddin, Hishamuddin |
Zamzuri, Hairi |
Kadir, Zulkiffli Abd |
Aparow, Vimal Rau
Topics
elektronske bobnaste zavore |
validacija |
modeliranje |
tehnika identifikacije sistema |
metoda ocenjevanja fizikalnih parametrov |
optimizacija kota razpirala
source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 63, no. 3, Mar. 2017, str. 181-190, SI 26)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Ahmad, Fauzi | |
Hudha, Khisbullah | |
Mazlan, Saiful Amri | |
Jamaluddin, Hishamuddin | |
Zamzuri, Hairi | |
Kadir, Zulkiffli Abd | |
Aparow, Vimal Rau |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi