3D printing technology (3DP) as additive manufacturing is an innovative design technology that can meet the individual nutritional and sensory needs of consumers. Therefore, the aim of this work was ...to apply 3DP in the production of a strawberry-based functional product with the addition of two hydrocolloids (corn and wheat starch) in three proportions (10, 15 and 20%) and to investigate the influence of 3DP process parameters on physico-chemical and textural properties, as well as the bioactive and antioxidant potential and microbiological stability, with(out) the addition of natural antimicrobial agents. Starch type had a significant effect on all tested bioactive compounds, as well as on starch content, except for total phenolic and hydroxycinnamic acid contents. Considering the content of bioactive compounds and antioxidant capacity, program 2 proved to be more suitable than program 1. All samples exhibited good textural properties, a high degree of stability and minimal geometric deviations. Regarding microbiological safety, no pathogenic bacteria were found in the 3DP samples during storage. The 3DP sample with added citral at a concentration of 75 mg L
showed the best microbiological quality. Ultimately, 3DP can be successfully used for the production of new strawberry-based functional products.
Raspberries are one of Serbia's best-known and most widely exported fruits. Due to market fluctuation, producers are looking for ways to preserve this fresh product. Drying is a widely accepted ...method for preserving berries, as is the case with freeze-drying. Hence, the aim was to evaluate convective drying as an alternative to freeze-drying due to better accessibility, simplicity, and cost-effectiveness of Polana raspberries and compare it to a freeze-drying. Three factors were in experimental design: air temperature (60, 70, and 80 °C), air velocity (0,5 and 1,5 m · s
), and state of a product (fresh and frozen). Success of drying was evaluated with several quality criteria: shrinkage (change of volume), color change, shape, content of L-ascorbic acid, total phenolic content, flavonoid content, anthocyanin content, and antioxidant activity. A considerable influence of convective drying on color changes was not observed, as ΔE was low for all samples. It was obvious that fresh raspberries had less physical changes than frozen ones. On average, convective drying reduced L-ascorbic acid content by 80.00-99.99%, but less than 60% for other biologically active compounds as compared to fresh raspberries. Convective dried Polana raspberry may be considered as a viable replacement for freeze-dried raspberries.
The aim of this work was to investigate the microwave-assisted extraction (MAE) kinetics of polyphenolic compounds from organic peppermint leaves. The phytochemicals of peppermint (
L.) are ...increasingly used in food technology due to their numerous biological activities. The processing of various plant materials by MAE and the production of high-quality extracts is becoming increasingly important. Therefore, the influence of microwave irradiation power (90, 180, 360, 600, and 800 W) on total extraction yield (Y), total polyphenols yield (TP), and flavonoid yield (TF) were investigated. Common empirical models (first-order, Peleg's hyperbolic, Elovich's logarithmic, and power-law model) were applied to the extraction process. The first-order kinetics model provided the best agreement with the experimental results in terms of statistical parameters (SS
,
, and AARD). Therefore, the influences of irradiation power on the adjustable model parameters (
and
) were investigated. It was found that irradiation power exerted a significant influence on
, while its influence on the asymptotic value of the response was negligible. The highest experimentally determined
(2.28 min
) was obtained at an irradiation power of 600 W, while the optimal irradiation power determined by the maximum fitting curve determination predicted the highest
(2.36 min
) at 665 W.
Strawberry tree fruits (Arbutus unedo L.) are a natural source of valuable biologically active compounds. Therefore, the aim of this work was to develop a green extraction approach using pressurized ...liquid extraction (PLE) to provide the highest yield of bioactive compounds. Different extraction solvents (distilled water, 50% and 96% ethanol) and different PLE parameters were investigated: temperature (40, 80, and 120 °C), static extraction time (5 and 10 min), and number of cycles (1 and 2). Total phenolic contents (TPC), hydroxycinnamic acids (HCA), flavonols (FL), total flavonoids (TF), condensed tannins (CT), and antioxidant capacity (DPPH and FRAP) were determined in PLE extracts. Solvent type, temperature, static extraction time, and number of cycles had a statistically significant effect on all bioactive compounds and antioxidant capacity (p ≤ 0.05). All bioactive compounds were positively correlated with temperature, except for TPC and DPPH. For all polyphenols studied, the optimal PLE parameters were a temperature of 120 °C, a static extraction time of 10 min and 2 cycles. The best solvent for most bioactive compounds was 96% ethanol, except for TPC, for which 50% ethanol was better. This study suggests that PLE is a promising tool to intensify the extraction of bioactive compounds from strawberry tree fruits.
The strawberry tree (Arbutus unedo L.) is a Mediterranean plant known for the traditional use of its fruits and leaves due to their health benefits. Thus, it has been used for years in folk medicine ...to relieve various health conditions such as urological and kidney problems, dermatological, cardiovascular and gastrointestinal diseases. The fruits are traditionally used for making jams, jellies, and strong alcoholic beverages, while the leaves are mostly used for preparing tea. Since the leaves were more researched, previous results indicated that they have important biological effects, so further research should focus on the fruits. Due to its chemical composition, rich polyphenolic profile and the biological potential derived from it, the plant has great prospects for the production of functional foods and nutraceuticals. However, the plant’s potential is underutilized in terms of processing. Therefore, this review summarizes the properties and the potential of the fruits and leaves of A. unedo and their possible benefits for processing with respect to agricultural, nutritive, biological and economic values.
This work investigated the influence of pulsed electric field (PEF) and high-power ultrasound (HPU) combined with hurdle technology to preserve the bioactive compounds (BACs) content and antioxidant ...activity in stored strawberry juices. PEF was performed at 30 kV cm−1, 100 Hz during 1.5, 3, and 4.5 min, while HPU was performed at 25% amplitude and 50% pulse during 2.5, 5.0, and 7.5 min. Total phenols and hydroxycinnamic acids were the most stable BACs during the hurdle treatment without influence of the duration of both treatments, while flavonols and condensed tannins showed a significant stability dependence with respect to the duration of both treatments. Total phenols were also stable during storage, in contrast to the individual groups of BACs studied. A chemometric approach was used to optimize the parameters of the hurdle treatments with respect to the highest level of BACs and the antioxidant activity of the treated juices. In general, shorter treatment times in the hurdle approach resulted in better stability of BACs and antioxidant activity. The hurdle technology investigated in this study has the strong potential to be an excellent concept for optimizing the operating parameters of PEF and HPU technologies in the preservation of functional foods.
Functional nutrition, which includes the consumption of fruit juices, has become the field of interest for those seeking a healthy lifestyle. Functional nutrition is also of great interest to the ...food industry, with the aims of improving human health and providing economic prosperity in a sustainable manner. The functional food sector is the most profitable part of the food industry, with a fast-growing market resulting from new sociodemographic trends (e.g., longer life expectancy, higher standard of living, better health care), which often includes sustainable concepts of food production. Therefore, the demand for hurdle technology in the food industry is growing, along with the consumption of minimally processed foods, not only because this approach inactivates microorganisms in food, but because it can also prolong the shelf life of food products. To preserve food products such as fruit juices, the hurdle technology approach often uses non-thermal methods as alternatives to pasteurization, which can cause a decrease in the nutritional value and quality of the food. Non-thermal technologies are often combined with different hurdles, such as antimicrobial additives, thermal treatment, and ultraviolet or pulsed light, to achieve synergistic effects and overall quality improvements in (functional) juices. Hence, hurdle technology could be a promising approach for the preservation of fruit juices due to its efficiency and low impact on juice quality and characteristics, although all processing parameters still require optimization.
This study investigated the status of bioactive compounds (phenolic compounds, carotenoids, and vitamin C), changes in color performance, and microbiological quality in smoothies preserved by ...high-pressure processing (HP) and thermal pasteurization (P) during cold storage at 4 °C for 21 days. Chemometric tools were used to select relevant variables that represent the most useful information for the fast and accurate quality assessment of smoothies. HP was performed at 350 and 450 MPa for 5 and 15 min at room temperature, respectively, while P was performed at 85 °C for 7 min. Smoothies were prepared by blending juices of apple (50%,
/
), carrot (20%,
/
), chokeberry (5%,
/
), Indian banana puree (10%,
/
), and almond drink (15%,
/
). The results obtained indicated that lower pressures with a shorter duration of HP showed higher levels of bioactive compounds in the smoothies, compared to the control samples. Compared to P, the HP samples exhibited a greater stability of bioactive compounds during shelf life. HP was found to be highly effective in reducing the native microflora of the smoothies, without subsequent microbial activation during storage. This study demonstrated the usefulness of the chemometric approach in interpreting complex datasets for the effective quality assessment of smoothies treated with different preservation technologies.
Strawberries (
Duch. cv. 'Albion') were harvested at two stages of ripeness (75% vs. 100%) and their physicochemical, sensory, toxicological, and bioactive properties were evaluated before and after ...processing into juice. The fresh fruits and their by-products were also evaluated. During processing into juice, the color change was higher in the fully ripe fruits, confirming the encouraging prospects for using the less ripe strawberries for processing. The analysis of heavy metals (Cu, Zn, Ni, As, Cd, Pb) was carried out, and in juice and by-product samples of 100% maturity, only Pb was higher than the MDK. Of the 566 pesticides analyzed, only cyprodinil was found in the by-products of the strawberries at 75% maturity, while pyrimethanil was detected in all samples. Fresh strawberries of both ripeness levels were rated similarly to the corresponding juices for all sensory attributes studied, indicating that sensory perception was not affected by processing. However, ripeness was found to be an important factor influencing most sensory attributes. The by-products were the materials with the highest levels of all bioactive compounds. Considering all quality parameters evaluated, the chemometric evaluation confirms the suitability of 75% ripe strawberries for processing into functional juice, which could be important for the juice industry.