Given the mode of transmission of Middle East respiratory syndrome (MERS), healthcare workers (HCWs) in contact with MERS patients are expected to be at risk of MERS infections. We evaluated the ...prevalence of MERS coronavirus (CoV) immunoglobulin (Ig) G in HCWs exposed to MERS patients and calculated the incidence of MERS-affected cases in HCWs. We enrolled HCWs from hospitals where confirmed MERS patients had visited. Serum was collected 4 to 6 weeks after the last contact with a confirmed MERS patient. We performed an enzyme-linked immunosorbent assay (ELISA) to screen for the presence of MERS-CoV IgG and an indirect immunofluorescence test (IIFT) to confirm MERS-CoV IgG. We used a questionnaire to collect information regarding the exposure. We calculated the incidence of MERS-affected cases by dividing the sum of PCR-confirmed and serology-confirmed cases by the number of exposed HCWs in participating hospitals. In total, 1169 HCWs in 31 hospitals had contact with 114 MERS patients, and among the HCWs, 15 were PCR-confirmed MERS cases in study hospitals. Serologic analysis was performed for 737 participants. ELISA was positive in five participants and borderline for seven. IIFT was positive for two (0.3%) of these 12 participants. Among the participants who did not use appropriate personal protective equipment (PPE), seropositivity was 0.7% (2/294) compared to 0% (0/443) in cases with appropriate PPE use. The incidence of MERS infection in HCWs was 1.5% (17/1169). The seroprevalence of MERS-CoV IgG among HCWs was higher among participants who did not use appropriate PPE.
•A new type of precast concrete beam-to-column connection was introduced.•All specimens showed flexural mode of failure with forming plastic hinge at beams.•The joints showed good seismic performance ...verified with ACI test procedure.•Joint cracks were controlled by using ECC as casting material.•Test specimens with outer type connection showed higher strength than inner type.
Five half-scale interior beam-column assemblies representing a portion of a frame subjected to simulated seismic loading were tested, including one monolithic specimen and four precast specimens. Variables included the detailing used at the joint to achieve a structural continuity of the beam reinforcement, and the type of special reinforcement in the connection (whether ECC or transverse reinforcement). The specimen design followed the strong-column-weak-beam concept.
The beam reinforcement was purposely designed and detailed to develop plastic hinges at the beam and to impose large inelastic shear force demands into the joint. The joint performance was evaluated on the basis of connection strength, stiffness, energy dissipation, and drift capacity. From the test results, the plastic hinges at the beam controlled the specimen failure. In general, the performance of the beam-to-column connections was satisfactory. The joint strength was 1.15 times of that expected for monolithic reinforced concrete construction. The specimen behavior was ductile due to tensile deformability by ECC and the yielding steel plate, while the strength was nearly constant up to a drift of 3.5%.
The enhancement of the functional properties of materials at reduced dimensions is crucial for continuous advancements in nanoelectronic applications. Here, we report that the scale reduction leads ...to the emergence of an important functional property, ferroelectricity, challenging the long-standing notion that ferroelectricity is inevitably suppressed at the scale of a few nanometers. A combination of theoretical calculations, electrical measurements, and structural analyses provides evidence of room-temperature ferroelectricity in strain-free epitaxial nanometer-thick films of otherwise nonferroelectric strontium titanate (SrTiO3). We show that electrically induced alignment of naturally existing polar nanoregions is responsible for the appearance of a stable net ferroelectric polarization in these films. This finding can be useful for the development of low-dimensional material systems with enhanced functional properties relevant to emerging nanoelectronic devices.
The interconversion of charge and spin currents via spin-Hall effect is essential for spintronics. Energy-efficient and deterministic switching of magnetization can be achieved when spin ...polarizations of these spin currents are collinear with the magnetization. However, symmetry conditions generally restrict spin polarizations to be orthogonal to both the charge and spin flows. Spin polarizations can deviate from such direction in nonmagnetic materials only when the crystalline symmetry is reduced. Here, we show control of the spin polarization direction by using a non-collinear antiferromagnet Mn
GaN, in which the triangular spin structure creates a low magnetic symmetry while maintaining a high crystalline symmetry. We demonstrate that epitaxial Mn
GaN/permalloy heterostructures can generate unconventional spin-orbit torques at room temperature corresponding to out-of-plane and Dresselhaus-like spin polarizations which are forbidden in any sample with two-fold rotational symmetry. Our results demonstrate an approach based on spin-structure design for controlling spin-orbit torque, enabling high-efficient antiferromagnetic spintronics.
Stacking fault energies (SFE) were determined in additively manufactured (AM) stainless steel (SS 316 L) and equiatomic CrCoNi medium-entropy alloys. AM specimens were fabricated via directed energy ...deposition and tensile loaded at room temperature. In situ neutron diffraction was performed to obtain a number of faulting-embedded diffraction peaks simultaneously from a set of (hkl) grains during deformation. The peak profiles diffracted from imperfect crystal structures were analyzed to correlate stacking fault probabilities and mean-square lattice strains to the SFE. The result shows that averaged SFEs are 32.8 mJ/m
for the AM SS 316 L and 15.1 mJ/m
for the AM CrCoNi alloys. Meanwhile, during deformation, the SFE varies from 46 to 21 mJ/m
(AM SS 316 L) and 24 to 11 mJ/m
(AM CrCoNi) from initial to stabilized stages, respectively. The transient SFEs are attributed to the deformation activity changes from dislocation slip to twinning as straining. The twinning deformation substructure and atomic stacking faults were confirmed by electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). The significant variance of the SFE suggests the critical twinning stress as 830 ± 25 MPa for the AM SS 316 L and 790 ± 40 MPa for AM CrCoNi, respectively.
The RENO experiment has observed the disappearance of reactor electron antineutrinos, consistent with neutrino oscillations, with a significance of 4.9 standard deviations. Antineutrinos from six 2.8 ... GW(th) reactors at the Yonggwang Nuclear Power Plant in Korea, are detected by two identical detectors located at 294 and 1383 m, respectively, from the reactor array center. In the 229 d data-taking period between 11 August 2011 and 26 March 2012, the far (near) detector observed 17102 (154088) electron antineutrino candidate events with a background fraction of 5.5% (2.7%). The ratio of observed to expected numbers of antineutrinos in the far detector is 0.920±0.009(stat)±0.014(syst). From this deficit, we determine sin(2)2θ(13)=0.113±0.013(stat)±0.019(syst) based on a rate-only analysis.
Isostructural metal-insulator transition in VO2 Lee, D; Chung, B; Shi, Y ...
Science (American Association for the Advancement of Science),
11/2018, Volume:
362, Issue:
6418
Journal Article
Peer reviewed
Open access
Separating structure and electrons in VO2Above 341 kelvin—not far from room temperature—bulk vanadium dioxide (VO2) is a metal. But as soon as the material is cooled below 341 kelvin, VO2 turns into ...an insulator and, at the same time, changes its crystal structure from rutile to monoclinic. Lee et al. studied the peculiar behavior of a heterostructure consisting of a layer of VO2 placed underneath a layer of the same material that has a bit less oxygen. In the VO2 layer, the structural transition occurred at a higher temperature than the metal-insulator transition. In between those two temperatures, VO2 was a metal with a monoclinic structure—a combination that does not occur in the absence of the adjoining oxygen-poor layer.Science, this issue p. 1037The metal-insulator transition in correlated materials is usually coupled to a symmetry-lowering structural phase transition. This coupling not only complicates the understanding of the basic mechanism of this phenomenon but also limits the speed and endurance of prospective electronic devices. We demonstrate an isostructural, purely electronically driven metal-insulator transition in epitaxial heterostructures of an archetypal correlated material, vanadium dioxide. A combination of thin-film synthesis, structural and electrical characterizations, and theoretical modeling reveals that an interface interaction suppresses the electronic correlations without changing the crystal structure in this otherwise correlated insulator. This interaction stabilizes a nonequilibrium metallic phase and leads to an isostructural metal-insulator transition. This discovery will provide insights into phase transitions of correlated materials and may aid the design of device functionalities.
Genomic rearrangements are frequently observed in cancer cells but have been difficult to generate in a highly specific manner for functional analysis. Here we report the application of CRISPR/Cas ...technology to successfully generate several types of chromosomal rearrangements implicated as driver events in lung cancer, including the CD74-ROS1 translocation event and the EML4-ALK and KIF5B-RET inversion events. Our results demonstrate that Cas9-induced DNA breaks promote efficient rearrangement between pairs of targeted loci, providing a highly tractable approach for the study of genomic rearrangements.
PDF
