High-performance aerogel fibers with high porosity, ultralow density and thermal conductivity, and good flexibility are attractive candidates for the next generation of effective thermal insulation, ...efficient personal thermal management, and other functional applications. However, most previously reported aerogel fibers suffered from either limited working temperatures, weak mechanical properties, or complex manufacturing processes. In the present work, a facile wet-spinning technique combined with freeze-drying was developed to fabricate strong polyimide aerogel fibers (PAFs) based on organo-soluble polyimide. Attributed to the unique “porous core–dense sheath” morphology, the PAFs exhibited excellent mechanical properties with an optimum tensile strength of 265 MPa and an initial modulus of 7.9 GPa at an ultimate elongation of 65%, representing the highest value for aerogel fibers reported so far. Moreover, the PAFs possess high porosity (>80%) and high specific surface area (464 m2 g–1), which render the woven PAF fabrics with excellent thermal insulation properties within a wide temperature range (−190 to 320 °C) and potential applications for thermal insulation under harsh environments. Additionally, a series of functionalized aerogel fibers or their fabrics based on PAFs, including phase-change fabrics with a thermoregulation function and electromagnetic shielding (EMI) textiles with a high EMI SE value, have been successfully fabricated for expanding their potential applications. Overall, this novel aerogel fiber sheds light on a promising direction for developing the next generation of high-performance thermal insulation and multifunctional fibers and textiles.
Display omitted
•Polyimide aerogels are prepared by incorporating TFMB into BPDA/ODA backbones.•These fluorinated aerogels show ultralow dielectric constants and loss tangents.•Moisture-resistance is ...dramatically enhanced by adding a small quantity of TFMB.•These fluorinated aerogels exhibit superior lipophilicity.
Conventional polyimide aerogels made from biphenyl-3,3′,4,4′-tetracarboxylic dianydride (BPDA) and 4,4′-oxidianiline (ODA) exhibit poor resistance to moisture and mechanical properties. In this work, a versatile diamine, 2,2′-bis-(trifluoromethyl)-4,4′-diaminobiphenyl (TFMB), is introduced to BPDA/ODA backbone to modify the comprehensive performance of this aerogel. Among all formulations, the resulted polyimide aerogels exhibit the lowest shrinkage and density as well as highest porosity, at the ODA/TFMB molar ratio of 5/5. Dielectric constants and loss tangents of the aerogels fall in the range of 1.29–1.33 and 0.001–0.004, respectively, and more TFMB fractions results in a slightly decrease of dielectric constant and loss tangent. In addition, moisture-resistance of the aerogels are dramatically enhanced as the water absorption decreasing from 415% for BPDA/ODA to 13% for the polyimide aerogel at the ODA/TFMB molar ratio of 7/3, and even to 4% for the homo-BPDA/TFMB polyimide aerogel, showing a superhydrophobic characteristic, which is a great advantage for polyimide aerogels used as low dielectric materials. Meanwhile, all of formulations of aerogels exhibit high absorption capacities for oils and common organic solvents, indicating that these fluorinated polyimide aerogels are good candidates for the separation of oils/organic solvents and water. Mechanical properties and thermal stability of the polyimide aerogels are also raised to varying degrees due to the rigid-rod biphenyl structure introduced by TFMB.
We prepared a double-layer magnetic nanocomposite Fe
3
O
4
@ZIF-8@ZIF-67 by layer-by-layer self-assembly. Fe
3
O
4
@ZIF-8@ZIF-67 was used to remove tetracycline from an aqueous solution via a ...combination of adsorption and Fenton-like oxidation. Depending on the outstanding porous structure of the Fe
3
O
4
@ZIF-8@ZIF-67, a high adsorption capacity for tetracycline was 356.25 mg g
−1
, with > 95.47% removal efficiency within 100 min based on Fenton-like oxidation. To better understand the mechanisms involved in integrated adsorption and Fenton-like oxidation, various advanced characterization techniques were used to monitor the changes in morphology and composition of Fe
3
O
4
@ZIF-8@ZIF-67 before and after removal of tetracycline. Scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) all supported adsorption and Fenton oxidation of tetracycline. This study extends the application of Fe
3
O
4
@ZIF-8@ZIF-67 for environmental remediation.
Graphical abstract
Rationally designing sulfur hosts with the functions of confining lithium polysulfides (LiPSs) and promoting sulfur reaction kinetics is critically important to the real implementation of ...lithium-sulfur (Li-S) batteries. Herein, the defect-rich carbon black (CB) as sulfur host was successfully constructed through a rationally regulated defect engineering. Thus-obtained defect-rich CB can act as an active electrocatalyst to enable the sulfur redox reaction kinetics, which could be regarded as effective inhibitor to alleviate the LiPS shuttle. As expected, the cathode consisting of sulfur and defect-rich CB presents a high rate capacity of 783.8 mA·h·g
−1
at 4 C and a low capacity decay of only 0.07% per cycle at 2 C over 500 cycles, showing favorable electrochemical performances. The strategy in this investigation paves a promising way to the design of active electrocatalysts for realizing commercially viable Li-S batteries.
In order to study the influence of steel fibers on the mechanical properties of Perfobond Leiste (PBL) shear connectors and improve the utilization of steel fibers in this structure, four push-out ...test specimens and eight finite element numerical models were produced to study PBL-type shear connector specimens with different steel fiber blending amounts and blending forms. The results show that in this structure, when the blending amount of steel fiber was 0.5% to 1.5%, the ultimate bearing capacity of the specimen improved linearly, and the steel fiber helped to give full play to the performance of the PBL shear connector. The steel fibers distributed in the Z-direction have a significant impact on the mechanical properties of the PBL shear connector, and the steel fibers distributed in this direction have a significant effect on increasing the ultimate bearing capacity of the specimen. Steel fibers distributed in the Y-direction can greatly improve the plasticity of concrete. In addition, the effective action area of steel fibers is the triangular area from the bottom of the PBL shear connector to the two tops of the concrete.
In this paper, the low-velocity impact behavior and damage modes of carbon/glass-hybrid fiber-reinforced magnesium alloy laminates (FMLs-H) and pure carbon-fiber-reinforced magnesium alloy laminates ...(FMLs-C) are investigated using experimental, theoretical modeling, and numerical simulation methods. Low-velocity impact tests were conducted at incident energies of 20 J, 40 J, and 60 J using a drop-weight impact tester, and the load-displacement curves and energy-time curves of the FMLs were recorded and plotted. The results showed that compared with FMLs-C, the stiffness of FMLs-H was slightly reduced, but the peak load and energy absorption were both greatly improved. Finally, a finite element model based on the Abaqus-VUMAT subroutine was developed to simulate the experimental results, and the damage modes of the metal layer, fiber layer, and interlayer were observed and analyzed. The experimental results are in good agreement with the finite element analysis results. The damage mechanisms of two kinds of FMLs under low-velocity impacts are discussed, providing a reference for the design and application of laminates.
Background
The mean age of gastric cancer (GC) patients has increased due to the aging society. Elderly GC patients with poor physical status tend to develop complications during the treatment ...courses, which cause early death. This study aimed to identify risk factors and establish nomograms for predicting total early death and cancer-specific early death in elderly GC patients.
Methods
Data for elderly GC patients were extracted from the Surveillance, Epidemiology, and End Results (SEER) database. These patients were randomly assigned to a training cohort and a validation cohort. The univariate logistic regression model and backward stepwise logistic regression model were used to identify independent risk factors for early death. Nomograms were constructed to predict the overall risk of early death and their performance was validated by receiver operating characteristic (ROC) curve, calibration curve, decision curve analyses (DCA), integrated discrimination improvement (IDI), and net reclassification improvement (NRI) in both training and validation cohorts.
Results
Among the 3102 enrolled patients, 1114 patients died within three months from the first diagnosis and 956 of them died due to cancer-specific causes. Non-Asian or Pacific Islander (API) race, non-cardia/fundus or lesser/greater curvature, higher AJCC stage, no surgery and no chemotherapy were all related to a high risk of both all-cause early death and cancer-specific early death. Higher T stage and N0 stage were only positively related to total early mortality, while liver metastasis was only positively related to cancer-specific early mortality. Based on these identified factors, two nomograms were developed for predicting the risk of all-cause and cancer-specific early death, which showed good performance with the AUC of the nomograms were 0.775 and 0.766, respectively. The calibration curves, DCAs, NRI, and IDI also confirmed the value of these nomograms.
Conclusions
These nomogram models were considered a practical tool to identify the early death of elderly GC patients and help provide a more individualized treatment strategy.
In this paper, the tensile mechanical behavior and progressive damage morphology of glass-fiber-reinforced magnesium alloy laminate for different numbers of holes in a temperature range of 25–180 °C ...were investigated. In addition, based on extensive tensile tests, the tensile mechanical behavior and microscopic damage morphology of porous-glass-fiber-reinforced magnesium alloy laminates at different temperatures were observed by finite element simulation and scanning electron microscopy (SEM). Finally, the numerical simulation and experimental results were in good accordance with the prediction of mechanical properties and fracture damage patterns of the laminates, the average difference between the residual strength values of the specimens at ambient temperature was 5.57%, and the stress–strain curves were in good agreement. The experimental and finite element analysis results showed that the damaged area of the bonded layer tended to expand with the increase in the number of holes, which has a lesser effect on the ultimate tensile strength. As the temperature increased, the specimens changed from obvious fiber breakage (pull-out) and the resin matrix damage mode to matrix softening damage and interfacial delamination fracture damage. As the testing temperature of the specimens increased from 25 °C to 180 °C, the tensile strength of the specimens decreased by an average of 51.59%, while the tensile strength of the specimens showed a nonlinear decreasing trend. The damage mechanism of porous-glass-fiber-reinforced magnesium alloy laminates at different temperatures is discussed in this paper, which can provide a reference for engineering applications and design.
The mycotoxin zearalenone (ZEA) produced by toxigenic fungi is widely present in cereals and its downstream products. The danger of ZEA linked to various human health issues has attracted increasing ...attention. Thus, powerful ZEA-degrading or detoxifying strategies are urgently needed. Biology-based detoxification methods are specific, efficient, and environmentally friendly and do not lead to negative effects during cereal decontamination. Among these, ZEA detoxification using degrading enzymes was documented to be a promising strategy in broad research. Here, two efficient ZEA-degrading lactonases from the genus Gliocladium, ZHDR52 and ZHDP83, were identified for the first time. This work studied the degradation capacity and properties of ZEA using purified recombinant ZHDR52 and ZHDP83.
According to the ZEA degradation study, transformed Escherichia coli BL21(DE3) PLySs cells harboring the zhdr52 or zhdp83 gene could transform 20 µg/mL ZEA within 2 h and degrade > 90% of ZEA toxic derivatives, α/β-zearalanol and α/β-zearalenol, within 6 h. Biochemical analysis demonstrated that the optimal pH was 9.0 for ZHDR52 and ZHDP83, and the optimum temperature was 45 °C. The purified recombinant ZHDR52 and ZHDP83 retained > 90% activity over a wide range of pH values and temperatures (pH 7.0-10.0 and 35-50 °C). In addition, the specific activities of purified ZHDR52 and ZHDP83 against ZEA were 196.11 and 229.64 U/mg, respectively. The results of these two novel lactonases suggested that, compared with ZHD101, these two novel lactonases transformed ZEA into different products. The slight position variations in E126 and H242 in ZDHR52/ZEA and ZHDP83/ZEA obtained via structural modelling may explain the difference in degradation products. Moreover, the MCF-7 cell proliferation assay indicated that the products of ZEA degradation using ZHDR52 and ZHDP83 did not exhibit estrogenic activity.
ZHDR52 and ZHDP83 are alkali ZEA-degrading enzymes that can efficiently and irreversibly degrade ZEA into non-estrogenic products, indicating that they are potential candidates for commercial application. This study identified two excellent lactonases for industrial ZEA detoxification.
This case report details a patient with Pancreatic Acinar Cell Carcinoma (PACC), a rare malignancy with distinctive biological and imaging features. In the absence of standardized treatment protocols ...for PACC, we embarked on a diagnostic journey that led to the adoption of an innovative therapeutic regimen in our institution. A 45-year-old female patient presented with a pancreatic mass, which was histologically confirmed as PACC following a biopsy. Subsequent genomic profiling revealed a high tumor mutational burden (21.4/Mb), prompting the initiation of combined immunotherapy and targeted therapy. Notably, the patient experienced a unique adverse reaction to the immunotherapy-recurrent subcutaneous soft tissue nodules, particularly in the gluteal and lower limb regions, accompanied by pain, yet resolving spontaneously. Following six cycles of the dual therapy, radiological evaluations indicated a decrease in tumor size, leading to a successful surgical excision. Over a 20-month post-surgical follow-up, the patient showed no signs of disease recurrence. This narrative adds to the existing knowledge on PACC and highlights the potential efficacy of immunotherapy in managing this challenging condition, emphasizing the importance of close monitoring for any adverse reactions.
PDF
