Homochiral metal–organic framework (MOF) membranes have been recently reported for chiral separations. However, only a few high‐quality homochiral polycrystalline MOF membranes have been fabricated ...due to the difficulty in crystallization of a chiral MOF layer without defects on porous substrates. Alternatively, mixed matrix membranes (MMMs), which combine potential advantages of MOFs and polymers, have been widely demonstrated for gas separation and water purification. Here we report novel homochiral MOF–polymer MMMs for efficient chiral separation. Homochirality was successfully incorporated into achiral MIL‐53‐NH2 nanocrystals by post‐synthetic modification with amino acids, such as l‐histidine (l‐His) and l‐glutamic acid (l‐Glu). The MIL‐53‐NH‐l‐His and MIL‐53‐NH‐l‐Glu nanocrystals were then embedded into polyethersulfone (PES) matrix to form homochiral MMMs, which exhibited excellent enantioselectivity for racemic 1‐phenylethanol with the highest enantiomeric excess value up to 100 %. This work, as an example, demonstrates the feasibility of fabricating diverse large‐scale homochiral MOF‐based MMMs for chiral separation.
Superior separation: Homochiral MOF–polymer mixed matrix membranes (MMMs) are synthesized by incorporation of amino acid functionalized MIL‐53‐NH2 into the polyethersulfone (PES) matrix. The homochiral MIL‐53‐NH‐amino acid‐PES MMM exhibits excellent enantioselectivity towards racemic 1‐phenylethanol with enantiomeric excess values up to 100 %.
Nanoparticles with widely varying physical properties and origins (spherical versus irregular, synthetic versus biological, organic versus inorganic, flexible versus rigid, small versus large) have ...been previously noted to translocate across the cell plasma membrane. We have employed atomic force microscopy to determine if the physical disruption of lipid membranes, formation of holes and/or thinned regions, is a common mechanism of interaction between these nanoparticles and lipids. It was found that a wide variety of nanoparticles, including a cell penetrating pepide (MSI-78), a protein (TAT), polycationic polymers (PAMAM dendrimers, pentanol-core PAMAM dendrons, polyethyleneimine, and diethylaminoethyl-dextran), and two inorganic particles (Au-NH2, SiO2-NH2), can induce disruption, including the formation of holes, membrane thinning, and/or membrane erosion, in supported lipid bilayers.
Display omitted
The development of effective drug delivery systems requires in-depth characterization of the micro- or nanostructure of the material vectors with high spatial resolution, resulting in ...a deep understanding of the design-function relationship and maximum therapeutic efficacy. Atomic force microscopy-infrared spectroscopy (AFM-IR) combines the high spatial resolution of AFM and the capabilities of IR spectroscopy to identify chemical composition and it has emerged as a powerful tool for the detailed characterization of a drug delivery system at the nanoscale. In addition, the instruments also allow thermal and mechanical evaluation at the nanoscale. In this review, we highlight the applications of AFM-IR in various drug delivery systems, including polymer-based carriers, lipid-contained nanocarriers, and metal-based nanocarriers. The existing challenges as well as the future perspectives for the application of AFM-IR for drug delivery vector characterization are also discussed.
Cationic polymers have been investigated as nonviral vectors for gene delivery due to their favorable safety profile when compared to viral vectors. However, nonviral vectors are limited by poor ...efficacy in inducing gene expression. The physicochemical properties of cationic polymers enabling successful gene expression have been investigated in order to improve expression efficiency and safety. Studies over the past several years have focused on five possible rate-limiting processes to explain the differences in gene expression: (1) endosomal release, (2) transport within specific intracellular pathways, (3) protection of DNA from nucleases, (4) transport into the nucleus, and (5) DNA release from vectors. However, determining the relative importance of these processes and the vector properties necessary for optimization remain a challenge to the field. In this Account, we describe over a decade of studies focused on understanding the interaction of cationic polymer and cationic polymer/oligonucleotide (polyplex) interactions with model lipid membranes, cell membranes, and cells in culture. In particular, we have been interested in how the interaction between cationic polymers and the membrane influences the intracellular transport of intact DNA to the nucleus. Recent advances in microfluidic patch clamp techniques enabled us to quantify polyplex cell membrane interactions at the cellular level with precise control over material concentrations and exposure times. In attempting to relate these findings to subsequent intracellular transport of DNA and expression of protein, we needed to develop an approach that could distinguish DNA that was intact and potentially functional for gene expression from the much larger pool of degraded, nonfunctional DNA within the cell. We addressed this need by developing a FRET oligonucleotide molecular beacon (OMB) to monitor intact DNA transport. The research highlighted in this Account builds to the conclusion that polyplex transported DNA is released from endosomes by free cationic polymer intercalated into the endosomal membrane. This cationic polymer initially interacts with the cell plasma membrane and appears to reach the endosome by lipid cycling mechanisms. The fraction of cells displaying release of intact DNA from endosomes quantitatively predicts the fraction of cells displaying gene expression for both linear poly(ethylenimine) (L-PEI; an effective vector) and generation five poly(amidoamine) dendrimer (G5 PAMAM; an ineffective vector). Moreover, intact OMB delivered with G5 PAMAM, which normally is confined to endosomes, was released by the subsequent addition of L-PEI with a corresponding 10-fold increase in transgene expression. These observations are consistent with experiments demonstrating that cationic polymer/membrane partition coefficients, not polyplex/membrane partition coefficients, predict successful gene expression. Interestingly, a similar partitioning of cationic polymers into the mitochondrial membranes has been proposed to explain the cytotoxicity of these materials. Thus, the proposed model indicates the same physicochemical property (partitioning into lipid bilayers) is linked to release from endosomes, giving protein expression, and to cytotoxicity.
Microwave heating promises numerous benefits over conventional heating including rapid thermal ramps, energy transfer rather than heat transfer, material selectivity, and improved automation and ...safety. This set of advantages has led to growing application in industrial processes. Currently, use of microwave heating is restricted because many materials of interest have poor dielectric loss properties and therefore respond poorly to microwave radiation. For this reason, nanostructured materials with high dielectric loss constants that can absorb microwave energy and convert it to heat are desired. Combination of the nanoscale receptors with base materials offers the opportunity to create composites with a high dielectric loss factor. This review covers the development of nanostructured microwave receptors and their applications. The structure of microwave receptors and their compatibility with the base material have a significant effect on the final dielectric properties. Therefore, various nanostructured microwave receptors, their surface modification, and the effect of the interface between the nanostructured receptors and the base materials are reviewed. Fundamental aspects of dielectric materials and their role in dielectric performance are discussed. Finally, key challenges, directions for further studies, and some promising nanostructured microwave receptors are suggested.
Background:
Nearly three-quarters of anterior cruciate ligament (ACL) injuries occur as “noncontact” failures from routine athletic maneuvers. Recent in vitro studies revealed that repetitive ...strenuous submaximal knee loading known to especially strain the ACL can lead to its fatigue failure, often at the ACL femoral enthesis.
Hypothesis:
ACL failure can be caused by accumulated tissue fatigue damage: specifically, chemical and structural evidence of this fatigue process will be found at the femoral enthesis of ACLs from tested cadaveric knees, as well as in ACL explants removed from patients undergoing ACL reconstruction.
Study Design:
Controlled laboratory study.
Methods:
One knee from each of 7 pairs of adult cadaveric knees were repetitively loaded under 4 times–body weight simulated pivot landings known to strain the ACL submaximally while the contralateral, unloaded knee was used as a comparison. The chemical and structural changes associated with this repetitive loading were characterized at the ACL femoral enthesis at multiple hierarchical collagen levels by employing atomic force microscopy (AFM), AFM–infrared spectroscopy, molecular targeting with a fluorescently labeled collagen hybridizing peptide, and second harmonic imaging microscopy. Explants from ACL femoral entheses from the injured knee of 5 patients with noncontact ACL failure were also characterized via similar methods.
Results:
AFM–infrared spectroscopy and collagen hybridizing peptide binding indicate that the characteristic molecular damage was an unraveling of the collagen molecular triple helix. AFM detected disruption of collagen fibrils in the forms of reduced topographical surface thickness and the induction of ~30- to 100-nm voids in the collagen fibril matrix for mechanically tested samples. Second harmonic imaging microscopy detected the induction of ~10- to 100-µm regions where the noncentrosymmetric structure of collagen had been disrupted. These mechanically induced changes, ranging from molecular to microscale disruption of normal collagen structure, represent a previously unreported aspect of tissue fatigue damage in noncontact ACL failure. Confirmatory evidence came from the explants of 5 patients undergoing ACL reconstruction, which exhibited the same pattern of molecular, nanoscale, and microscale structural damage detected in the mechanically tested cadaveric samples.
Conclusion:
The authors found evidence of accumulated damage to collagen fibrils and fibers at the ACL femoral enthesis at the time of surgery for noncontact ACL failure. This tissue damage was similar to that found in donor knees subjected in vitro to repetitive 4 times–body weight impulsive 3-dimensional loading known to cause a fatigue failure of the ACL.
Clinical Relevance:
These findings suggest that some ACL injuries may be due to an exacerbation of preexisting hierarchical tissue damage from activities known to place larger-than-normal loads on the ACL. Too rapid an increase in these activities could cause ACL tissue damage to accumulate across length scales, thereby affecting ACL structural integrity before it has time to repair. Prevention necessitates an understanding of how ACL loading magnitude and frequency are anabolic, neutral, or catabolic to the ligament.
The nanoscale hierarchical design that draws inspiration from nature’s biomaterials allows the enhancement of material performance and enables multifarious applications. Self-assembly of block ...copolymers represents one of these artificial techniques that provide an elegant bottom-up strategy for the synthesis of soft colloidal hierarchies. Fast-growing polymerization-induced self-assembly (PISA) renders a one-step process for the polymer synthesis and in situ self-assembly at high concentrations. Nevertheless, it is exceedingly challenging for the fabrication of hierarchical colloids via aqueous PISA, simply because most monomers produce kinetically trapped spheres except for a few PISA-suitable monomers. We demonstrate here a sequential one-pot synthesis of hierarchically self-assembled polymer colloids with diverse morphologies via aqueous PISA that overcomes the limitation. Complex formation of water-immiscible monomers with cyclodextrin via “host–guest” inclusion, followed by sequential aqueous polymerization, provides a linear triblock terpolymer that can in situ self-assemble into hierarchical nanostructures. To access polymer colloids with different morphologies, three types of linear triblock terpolymers were synthesized through this methodology, which allows the preparation of AX n -type colloidal molecules (CMs), core–shell–corona micelles, and raspberry-like nanoparticles. Furthermore, the phase separations between polymer blocks in nanostructures were revealed by transmission electron microscopy and atomic force microscopy-infrared spectroscopy. The proposed mechanism explained how the interfacial tensions and glass transition temperatures of the core-forming blocks affect the morphologies. Overall, this study provides a scalable method of the production of CMs and other hierarchical structures. It can be applied to different block copolymer formulations to enrich the complexity of morphology and enable diverse functions of nano-objects.
Solid state chemical analysis of pharmaceutical inhalation aerosols at the individual particle level has been an analytical challenge. These particles can range from a few nanometers to micrometers ...and are a complex mixture of drugs and excipients. Conventional analytical techniques cannot resolve the distribution of excipients and drugs at the submicrometer scale. Understanding the nanochemical composition of individual particles can be critical for pharmaceutical scientists to evaluate drug and excipient stability as well as the drug-drug or drug-excipient interactions that affect the aerosol performance of powders. Herein, we show the novel application of a combination of optical photothermal infrared (O-PTIR) spectroscopy and atomic force microscopy infrared (AFM-IR) spectroscopy to probe nanochemical domains of powders containing the inhaled corticosteroid fluticasone propionate and long-acting β2-agonist salmeterol xinafoate, which are widely used to treat asthma and chronic obstructive pulmonary disease. Three types of powder formulation were analyzed, including the commercial product Seretide, which is a physical mixture of the drugs with crystalline lactose, and two spray-dried powders containing the drugs along with either amorphous or crystalline lactose. We obtained spatially resolved O-PTIR and AFM-IR spectra confirming the presence of peaks related to fluticasone propionate at 1743, 1661, and 1700 cm
, salmeterol xinafoate at 1580 cm
, and lactose at 1030 and 1160 cm
. The location of the drugs and lactose among the particles varied significantly, depending on the formulation type. For the first time, it was possible to map the drug distribution in individual aerosol particles. This is significant as such information has been lacking, and it will open an exciting research direction on how drug distribution affects the aerosol performance of powders and the consistency of dose uniformity. Further, these advanced spectroscopic techniques can be applied to study a wide range of pharmaceutical formulations.
Display omitted
Inhalation of pharmaceutical aerosol formulations is widely used to treat respiratory diseases. Spatially resolved thermal characterization offers promise for better understanding ...drug release rates from particles; however, this has been an analytical challenge due to the small particle size (from a few micrometers down to nanometers) and the complex composition of the formulations. Here, we employ nano-thermal analysis (nanoTA) to probe the nanothermal domain of a pharmaceutical aerosol formulation containing a mixture of fluticasone propionate (FP), salmeterol xinafoate (SX), and excipient lactose, which is widely used to treat asthma and chronic obstructive pulmonary disease (COPD). Furthermore, atomic force microscopy-infrared spectroscopy (AFM-IR) and AFM force measurements are performed to provide nanochemical and nanomechanical information to complement the nanothermal data. The colocalized thermal and chemical mapping clearly reveals the surface heterogeneity of the drugs in the aerosol particles and demonstrates the contribution of the surface chemical composition to the variation in the thermal properties of the particles. We present a powerful analytical approach for in-depth characterization of thermal/chemical/morphological properties of dry powder inhaler particles at micro- and nanometer scales. This approach can be used to facilitate the comparison between generics and reference inhalation products and further the development of high-performance pharmaceutical formulations.
Polycationic organic nanoparticles are shown to disrupt model biological membranes and living cell membranes at nanomolar concentrations. The degree of disruption is shown to be related to ...nanoparticle size and charge, as well as to the phase–fluid, liquid crystalline, or gel–of the biological membrane. Disruption events on model membranes have been directly imaged using scanning probe microsopy, whereas disruption events on living cells have been analyzed using cytosolic enzyme leakage assays, dye diffusion assays, and fluorescence microscopy.