Strategies for the ultrafast optical control of magnetism have been a topic of intense research for several decades because of the potential impact in technologies such as magnetic memory1, ...spintronics2 and quantum computation, as well as the opportunities for nonlinear optical control and modulation3 in applications such as optical isolation and non-reciprocity4. Here we report experimental quantification of optically induced magnetization in plasmonic gold nanoparticles due to the inverse Faraday effect. The induced magnetic moment is large under typical ultrafast pulse excitation (<1014 W m−2 peak intensity), with magnetization and demagnetization kinetics that are instantaneous within the subpicosecond time resolution of our study. Our results support a mechanism of coherent transfer of angular momentum from the optical field to the electron gas, and open the door to all-optical subwavelength strategies for optical isolation that do not require externally applied magnetic fields.Optically induced magnetization is experimentally demonstrated using gold nanoparticles. The inverse-Faraday-effect-enabled magnetization may lead to new types of compact optical isolator.
In the past decades, the doping of ZnO one‐dimensional nanostructures has attracted a great deal of attention due to the variety of possible morphologies, large surface‐to‐volume ratios, simple and ...low cost processing, and excellent physical properties for fabricating high‐performance electronic, magnetic, and optoelectronic devices. This article mainly concentrates on recent advances regarding the doping of ZnO one‐dimensional nanostructures, including a brief overview of the vapor phase transport method and hydrothermal method, as well as the fabrication process for photodetectors. The dopant elements include B, Al, Ga, In, N, P, As, Sb, Ag, Cu, Ti, Na, K, Li, La, C, F, Cl, H, Mg, Mn, S, and Sn. The various dopants which act as acceptors or donors to realize either p‐type or n‐type are discussed. Doping to alter optical properties is also considered. Lastly, the perspectives and future research outlook of doped ZnO nanostructures are summarized.
Recent developments in doping ZnO 1D nanostructured photodetectors are reviewed with a focus on the type of photodetector and the methods of synthesis and fabrication. In this review, the typical fabrication methods and structure–property relationships of these photodetectors are discussed. The photodetector performances of differently doped materials are also summarized and compared.
Ultrathin ferroelectric materials could potentially enable low-power perovskite ferroelectric tetragonality logic and nonvolatile memories
. As ferroelectric materials are made thinner, however, the ...ferroelectricity is usually suppressed. Size effects in ferroelectrics have been thoroughly investigated in perovskite oxides-the archetypal ferroelectric system
. Perovskites, however, have so far proved unsuitable for thickness scaling and integration with modern semiconductor processes
. Here we report ferroelectricity in ultrathin doped hafnium oxide (HfO
), a fluorite-structure oxide grown by atomic layer deposition on silicon. We demonstrate the persistence of inversion symmetry breaking and spontaneous, switchable polarization down to a thickness of one nanometre. Our results indicate not only the absence of a ferroelectric critical thickness but also enhanced polar distortions as film thickness is reduced, unlike in perovskite ferroelectrics. This approach to enhancing ferroelectricity in ultrathin layers could provide a route towards polarization-driven memories and ferroelectric-based advanced transistors. This work shifts the search for the fundamental limits of ferroelectricity to simpler transition-metal oxide systems-that is, from perovskite-derived complex oxides to fluorite-structure binary oxides-in which 'reverse' size effects counterintuitively stabilize polar symmetry in the ultrathin regime.
The critical size limit of voltage-switchable electric dipoles has extensive implications for energy-efficient electronics, underlying the importance of ferroelectric order stabilized at reduced ...dimensionality. We report on the thickness-dependent antiferroelectric-to-ferroelectric phase transition in zirconium dioxide (ZrO
) thin films on silicon. The emergent ferroelectricity and hysteretic polarization switching in ultrathin ZrO
, conventionally a paraelectric material, notably persists down to a film thickness of 5 angstroms, the fluorite-structure unit-cell size. This approach to exploit three-dimensional centrosymmetric materials deposited down to the two-dimensional thickness limit, particularly within this model fluorite-structure system that possesses unconventional ferroelectric size effects, offers substantial promise for electronics, demonstrated by proof-of-principle atomic-scale nonvolatile ferroelectric memory on silicon. Additionally, it is also indicative of hidden electronic phenomena that are achievable across a wide class of simple binary materials.
The soft and polar nature of quasi‐2D (PEA)2PbBr4 perovskite, and robust photo‐generated excitons lead exciton‐polaritons and exciton‐polarons as the important phenomena near the band edge for ...application in the lighting aspect. In this work, a convenient methodology is proposed based on the polariton resonant modes in temperature‐dependent (77 K to RT) spectroscopy, and investigate the effect of these quasi‐particles on refractive index dispersion. The large binding energy (≈335 meV) of quasi‐2D excitons is obtained by the reflectance measurements at 77 K. Stable exciton‐polaritons and exciton‐polarons are confirmed by energy dispersions and the observation of self‐trapped exciton‐polaron state, respectively. Furthermore, the large negative thermal‐optic coefficient due to damping effect of exciton‐phonon scattering is observed. The phenomenon is opposite to those observed in conventional semiconductors (e.g., Si, Ge, GaN, AlN, GaAs, AlAs, and ZnO etc.). The observed stable negative thermal‐optic coefficients from 160 K to RT indicate that the quasi‐2D perovskite can be used as a phase compensator for conventional semiconductor materials.
The shrinkage of the energy difference between lower polariton branches (LPs) and upper polariton branches (UPs) proves that oscillator strength decreases when the temperature rises from 77 to 300 K. Therefore, the strong damping effect of exciton‐phonon interactions reduces the oscillator strength when the temperature rises, and further result in the negative thermal‐optic behaviors of quasi‐2D (PEA)2PbBr4 perovskite.
Contrast associated kidney injury is caused by side effects of iodinated contrast media (ICM), including inflammation. Chronic inflammation among dialysis patient contributes to atherosclerosis, ...which leads to simultaneous conditions of the kidney, brain, and vasculature. Data to investigate the pathologic effects of ICM on cardiovascular complications in dialysis patients are lacking. Dialysis patients who had been exposed to ICM from computed tomography (ICM-CT) were allocated as the ICM-CT cohort (N = 3751), whereas dialysis patients without ICM exposure were randomly allocated as the non-ICM cohort (N = 17,196). Furthermore, 540 pairs were selected for analyses through propensity score-matching in terms of age, sex, comorbidities, dialysis vintage, and index date. During a median follow-up of 10.3 years, ICM-CT cohort had significantly higher risks in the following, compared with non-ICM cohort: all-cause mortality (adjusted hazard ratio aHR, 1.36; 95% confidence interval CI, 1.26-1.47), cardiovascular events (aHR,1.67; 95% CI, 1.39-2.01), acute coronary syndrome (adjusted HR: 2.92; 95% CI, 1.72-4.94), sudden cardiac arrest (aHR, 1.69; 95% CI, 0.90-3.18), heart failure (aHR, 1.71; 95% CI,1.28-2.27), and stroke (aHR, 1.84; 95% CI,1.45-2.35). The proinflammatory ICM is significantly associated with an increased risk of major cardiovascular events in patients on dialysis.
In recent years, skin spectral information has been gradually applied in various fields, such as the cosmetics industry and clinical medicine. However, the high price and the huge size of the skin ...spectrum measurement device make the related applications of the skin spectrum unable to be widely used in practical applications. We used convolutional neural network (CNN) to achieve a satisfying accuracy of the Fitzpatrick skin-type classification by using a simple self-developed device in 2018. Leveraging on the hardware, firmware, and software app-developing experience, a low-cost miniature skin spectrum measurement system (LMSSMS) using deep neural network (DNN) technology was further studied, and the feasibility of the system is verified in this paper. The developed LMSSMS is divided into three parts: (1) miniature skin spectrum measurement device (MSSMD), (2) DNN model, and (3) mobile app. The MSSMD was developed with innovative low-cost MSSC, 3D printing, and a simple LED light source. The DNN model is designed to enhance measurement accuracy. Finally, the mobile app is used to control and show the measurement results. The developed app also includes a variety of skin-spectrum-related applications, such as erythema index and melanin index (EI/MI) measurement, Fitzpatrick skin-type classification, Pantone SkinTone classification, sun-exposure estimation, and body-fat measurement. In order to verify the feasibility of LMSSMS, we used the standard instrumentation device as a reference. The results show that the accuracy of the LMSSMS can reach 94.7%, which also confirms that this development idea has much potential for further development.
ZnO quantum dots were synthesized successfully via a simple sol–gel method. The average size of quantum dots can be tailored using well-controlled concentration of zinc precursor. Size-dependent blue ...shifts of photoluminescence and absorption spectra revealed the quantum confinement effect. The band gap enlargement is in agreement with the theoretical calculation based on the effective mass model. Furthermore, as the particle size decreases, we observed an increase in the size-dependent Stokes shift of the photoluminescence peak relative to the absorption onset.