Background
IL‐25 has been proposed to play a key role in the pathogenesis of chronic rhinosinusitis with nasal polyps (CRSwNP). This study aimed to evaluate the association of IL‐25 with the ...Th2‐biased inflammatory profiles in CRSwNP.
Methods
Nasal polyp (NP) tissues and control uncinate process tissues were collected from 92 patients with CRSwNP, 20 patients with chronic rhinosinusitis without nasal polyps (CRSsNP), and 16 normal control subjects. IL‐25 expression was examined using immunohistochemistry and immunofluorescence staining, flow cytometry, RT‐qPCR, and ELISA. The inflammatory profiles and clinical characteristics of 2 NP subtypes (IL‐25high and IL‐25low) were evaluated, and the effects of IL‐25 on Th2 cytokine production in cultured dispersed polyp cells were examined in vitro.
Results
The mRNA and protein levels of IL‐25 were significantly increased in the polyp tissues compared with the control uncinate process tissues. The IL‐25high subtype showed greater computed tomography scores, endoscopic scores, and Th2 response. Exposure to IL‐25 activated type 2 innate lymphoid cells and Th2 cells in NP simultaneously which further increased Th2 cytokine production in vitro.
Conclusions
Local IL‐25 plays a crucial role in promoting Th2‐biased inflammatory profiles in NP and may serve as a promising therapeutic target in CRSwNP patients.
State-of-charge (SOC) estimation is one of the most challengeable tasks for battery management system (BMS) in electric vehicles. Since the external factors (voltage, current, temperature, ...arrangement of the batteries, etc.) are complicated, the formula of SOC is difficult to deduce and the existent SOC estimation methods are not generally suitable for the same vehicle running in different road conditions. In this paper, we propose a new SOC estimation based on an optimized support vector machine for regression (SVR) with double search optimization process. Our developed method is tested by simulation experiments in the ADVISOR, with a comparison of the estimations based on artificial neural network (ANN). It is demonstrated that our method is simpler and more accurate than that based on ANN to deal with the SOC estimation task.
Formic acid (HCOOH) is one of the most abundant acids in the atmosphere, with an important influence on precipitation chemistry and acidity. Here we employ a chemical transport model (GEOS-Chem CTM) ...to interpret recent airborne and ground-based measurements over the US Southeast in terms of the constraints they provide on HCOOH sources and sinks. Summertime boundary layer concentrations average several parts-per-billion, 2-3 larger than can be explained based on known production and loss pathways. This indicates one or more large missing HCOOH sources, and suggests either a key gap in current understanding of hydrocarbon oxidation or a large, unidentified, direct flux of HCOOH. Model-measurement comparisons implicate biogenic sources (e.g., isoprene oxidation) as the predominant HCOOH source. Resolving the unexplained boundary layer concentrations based (i) solely on isoprene oxidation would require a 3 increase in the model HCOOH yield, or (ii) solely on direct HCOOH emissions would require approximately a 25 increase in its biogenic flux. However, neither of these can explain the high HCOOH amounts seen in anthropogenic air masses and in the free troposphere. The overall indication is of a large biogenic source combined with ubiquitous chemical production of HCOOH across a range of precursors. Laboratory work is needed to better quantify the rates and mechanisms of carboxylic acid production from isoprene and other prevalent organics. Stabilized Criegee intermediates (SCIs) provide a large model source of HCOOH, while acetaldehyde tautomerization accounts for ~ 15% of the simulated global burden. Because carboxylic acids also react with SCIs and catalyze the reverse tautomerization reaction, HCOOH buffers against its own production by both of these pathways. Based on recent laboratory results, reaction between CH3O2 and OH could provide a major source of atmospheric HCOOH; however, including this chemistry degrades the model simulation of CH3OOH and NOx : CH3OOH. Developing better constraints on SCI and RO2 + OH chemistry is a high priority for future work. The model neither captures the large diurnal amplitude in HCOOH seen in surface air, nor its inverted vertical gradient at night. This implies a substantial bias in our current representation of deposition as modulated by boundary layer dynamics, and may indicate an HCOOH sink underestimate and thus an even larger missing source. A more robust treatment of surface deposition is a key need for improving simulations of HCOOH and related trace gases, and our understanding of their budgets.
Selpercatinib (LOXO-292) and pralsetinib (BLU-667) are highly potent RET-selective protein tyrosine kinase inhibitors (TKIs) for treating advanced RET-altered thyroid cancers and non-small-cell lung ...cancer (NSCLC). It is critical to analyze RET mutants resistant to these drugs and unravel the molecular basis to improve patient outcomes.
Cell-free DNAs (cfDNAs) were analyzed in a RET-mutant medullary thyroid cancer (MTC) patient and a CCDC6-RET fusion NSCLC patient who had dramatic response to selpercatinib and later developed resistance. Selpercatinib-resistant RET mutants were identified and cross-profiled with pralsetinib in cell cultures. Crystal structures of RET-selpercatinib and RET-pralsetinib complexes were determined based on high-resolution diffraction data collected with synchrotron radiation.
RETG810C/S mutations at the solvent front and RETY806C/N mutation at the hinge region were found in cfDNAs of an MTC patient with RETM918T/V804M/L, who initially responded to selpercatinib and developed resistance. RETG810C mutant was detected in cfDNAs of a CCDC6-RET-fusion NSCLC patient who developed acquired resistance to selpercatinib. Five RET kinase domain mutations at three non-gatekeeper residues were identified from 39 selpercatinib-resistant cell lines. All five selpercatinib-resistant RET mutants were cross-resistant to pralsetinib. X-ray crystal structures of the RET-selpercatinib and RET-pralsetinib complexes reveal that, unlike other TKIs, these two RET TKIs anchor one end in the front cleft and wrap around the gate wall to access the back cleft.
RET mutations at the solvent front and the hinge are resistant to both drugs. Selpercatinib and pralsetinib use an unconventional mode to bind RET that avoids the interference from gatekeeper mutations but is vulnerable to non-gatekeeper mutations.
•Resistance to selpercatinib and pralsetinib are found at the solvent front and hinge sites of the RET kinase domain.•The identified selpercatinib-resistant RET mutants are cross-resistant to pralsetinib.•Selpercatinib and pralsetinib use an unprecedented binding mode to dock into the RET kinase.•The new kinase inhibitor binding mode avoids the interference from gatekeeper mutations but remains vulnerable to non-gatekeeper mutations.
Regulations play an important role in assuring the construction quality. However, due to the large amount of regulation needs considered, the construction quality compliance checking against ...regulations can be cumbersome/time-consuming and error prone. In order to give more computerized support to the construction quality compliance checking against regulations, an ontology-based semantic modeling approach of regulation constraints is explored. A meta model for construction quality inspection and evaluation i.e. CQIEOntology is proposed in this paper. Based on CQIEontology, the regulation constraints are modeled into OWL axioms and SWRL rules. By these OWL axioms and SWRL rules, the regulation provisions imposed on construction quality inspection can be translated into a set of inspection tasks, and get associated with the specific construction tasks. Once the construction starts, the applicable inspection tasks, including a series of quality checking and evaluation, will be reminded and recommended. Obviously, the proposed approach facilitates taking the construction quality compliance checking as a paralleling activity to the construction rather than an afterthought, and helps the inspectors in quality inspection. Finally, the approach is demonstrated in Protégé 3.4.6 through case studies based on regulation examples taken from “Code for Acceptance of Construction Quality of Building Foundation (GB50202-2002) and the validation and discussion are given for it.”
► A meta model for construction quality inspection and evaluation is proposed. ► Ontology and semantic technologies are selected to model the relevant knowledge. ► The approach is tested and assessed. ► Helping inspectors implement quality checking against relevant regulations.
For wearable and implantable electronics applications, developing intrinsically stretchable polymer semiconductor is advantageous, especially in the manufacturing of large‐area and high‐density ...devices. A major challenge is to simultaneously achieve good electrical and mechanical properties for these semiconductor devices. While crystalline domains are generally needed to achieve high mobility, amorphous domains are necessary to impart stretchability. Recent progresses in the design of high‐performance donor–acceptor polymers that exhibit low degrees of energetic disorder, while having a high fraction of amorphous domains, appear promising for polymer semiconductors. Here, a low crystalline, i.e., near‐amorphous, indacenodithiophene‐co‐benzothiadiazole (IDTBT) polymer and a semicrystalline thieno3,2‐bthiophene‐diketopyrrolopyrrole (DPPTT) are compared, for mechanical properties and electrical performance under strain. It is observed that IDTBT is able to achieve both a high modulus and high fracture strain, and to preserve electrical functionality under high strain. Next, fully stretchable transistors are fabricated using the IDTBT polymer and observed mobility ≈0.6 cm2 V−1 s−1 at 100% strain along stretching direction. In addition, the morphological evolution of the stretched IDTBT films is investigated by polarized UV–vis and grazing‐incidence X‐ray diffraction to elucidate the molecular origins of high ductility. In summary, the near‐amorphous IDTBT polymer signifies a promising direction regarding molecular design principles toward intrinsically stretchable high‐performance polymer semiconductor.
Herein, a low crystalline indacenodithiophene‐co‐benzothiadiazole (IDTBT) donor–acceptor copolymer is reported to be able to preserve electrical functionality under high strain. The mechanical properties and morphological evolution for IDTBT thin films during stretching is systematically investigated. This kind of near‐amorphous polymer signifies a promising direction regarding molecular design principles toward intrinsically stretchable high‐performance polymer semiconductors.
Abstract
Spin-valley locking in monolayer transition metal dichalcogenides has attracted enormous interest, since it offers potential for valleytronic and optoelectronic applications. Such an exotic ...electronic state has sparsely been seen in bulk materials. Here, we report spin-valley locking in a Dirac semimetal BaMnSb
2
. This is revealed by comprehensive studies using first principles calculations, tight-binding and effective model analyses, angle-resolved photoemission spectroscopy measurements. Moreover, this material also exhibits a stacked quantum Hall effect (QHE). The spin-valley degeneracy extracted from the QHE is close to 2. This result, together with the Landau level spin splitting, further confirms the spin-valley locking picture. In the extreme quantum limit, we also observed a plateau in the
z
-axis resistance, suggestive of a two-dimensional chiral surface state present in the quantum Hall state. These findings establish BaMnSb
2
as a rare platform for exploring coupled spin and valley physics in bulk single crystals and accessing 3D interacting topological states.
We present measurements as part of the Southern Oxidant and Aerosol Study (SOAS) during which atmospheric aerosol particles were comprehensively characterized. We present results utilizing a Filter ...Inlet for Gases and AEROsol coupled to a chemical ionization mass spectrometer (CIMS). We focus on the volatility and composition of isoprene derived organic aerosol tracers and of the bulk organic aerosol. By utilizing the online volatility and molecular composition information provided by the FIGAERO–CIMS, we show that the vast majority of commonly reported molecular tracers of isoprene epoxydiol (IEPOX) derived secondary organic aerosol (SOA) is derived from thermal decomposition of accretion products or other low volatility organics having effective saturation vapor concentrations <10–3 μg m–3. In addition, while accounting for up to 30% of total submicrometer organic aerosol mass, the IEPOX-derived SOA has a higher volatility than the remaining bulk. That IEPOX-SOA, and more generally bulk organic aerosol in the Southeastern U.S. is comprised of effectively nonvolatile material has important implications for modeling SOA derived from isoprene, and for mechanistic interpretations of molecular tracer measurements. Our results show that partitioning theory performs well for 2-methyltetrols, once accretion product decomposition is taken into account. No significant partitioning delays due to aerosol phase or viscosity are observed, and no partitioning to particle-phase water or other unexplained mechanisms are needed to explain our results.
We report, for the first time, the long-awaited detection of diffuse gamma rays with energies between 100 TeV and 1 PeV in the Galactic disk. Particularly, all gamma rays above 398 TeV are observed ...apart from known TeV gamma-ray sources and compatible with expectations from the hadronic emission scenario in which gamma rays originate from the decay of π^{0}'s produced through the interaction of protons with the interstellar medium in the Galaxy. This is strong evidence that cosmic rays are accelerated beyond PeV energies in our Galaxy and spread over the Galactic disk.
We report on the highest energy photons from the Crab Nebula observed by the Tibet air shower array with the underground water-Cherenkov-type muon detector array. Based on the criterion of a muon ...number measured in an air shower, we successfully suppress 99.92% of the cosmic-ray background events with energies E>100 TeV. As a result, we observed 24 photonlike events with E>100 TeV against 5.5 background events, which corresponds to a 5.6σ statistical significance. This is the first detection of photons with E>100 TeV from an astrophysical source.
PDF
