The plastic deformation behavior and the effects of the impact time on the LY2 aluminum (Al) alloy during multiple laser shock processing (LSP) impacts were investigated. The residual stress in the ...near-surface region was determined by X-ray diffraction. In addition, the micro-structural features of the hardening layer were characterized by scanning electron microscopy, optical microscopy and transmission electron microscopy. It was found that the micro-structure was obviously refined due to the ultra-high plastic strain induced by multiple LSP impacts. The minimum grain size in the top surface after multiple LSP impacts was about 100–200
nm. The grain refinement process after multiple LSP impacts can be described as follows: (i) the formation and development of dislocation lines in original grains; (ii) dislocation tangles (DTs) and the formation of dense dislocation walls (DDWs); (iii) transformation of DTs and DDWs into subgrain boundaries; and (iv) evolution of the continuous dynamic recrystallization in subgrain boundaries to refined grain boundaries.
Functional failure of tau contributes to age-dependent, iron-mediated neurotoxicity, and as iron accumulates in ischemic stroke tissue, we hypothesized that tau failure may exaggerate ...ischemia-reperfusion-related toxicity. Indeed, unilateral, transient middle cerebral artery occlusion (MCAO) suppressed hemispheric tau and increased iron levels in young (3-month-old) mice and rats. Wild-type mice were protected by iron-targeted interventions: ceruloplasmin and amyloid precursor protein ectodomain, as well as ferroptosis inhibitors. At this age, tau-knockout mice did not express elevated brain iron and were protected against hemispheric reperfusion injury following MCAO, indicating that tau suppression may prevent ferroptosis. However, the accelerated age-dependent brain iron accumulation that occurs in tau-knockout mice at 12 months of age negated the protective benefit of tau suppression against MCAO-induced focal cerebral ischemia-reperfusion injury. The protective benefit of tau knockout was revived in older mice by iron-targeting interventions. These findings introduce tau-iron interaction as a pleiotropic modulator of ferroptosis and ischemic stroke outcome.
Display omitted
•Multilayer coatings mixed different Fe-based powders were investigated.•Microstructure and element distribution between both layers were investigated.•Ni element made alloying ...elements more evenly distributed in the LCed coatings.•Ni element improved impact toughness and corrosion resistance of LCed coatings.•Relationship between hardness and impact toughness of LCed coatings was presented.
Multilayer coatings with Fe-based powders that mixed different elements were prepared in the surface layer of 4Cr5MoSiV1 steel by laser cladding, and the corresponding microstructure and element distribution between both adjacent layers were investigated. Mechanical properties and electrochemical corrosion resistance were subsequently measured and analyzed. Results indicated that there were equiaxed dendrites and netlike eutectic structures at the interfaces between both adjacent layers of multilayer cladding, making the alloying elements more evenly distributed due to the addition of excess Ni element. Furthermore, the introduction and increment of Ni element to the Fe-based alloy significantly improved the impact toughness, and exhibited higher corrosion resistance of the cladding coatings.
Micro-structural evolution and grain refinement in ANSI 304 stainless steel subjected to multiple laser shock processing (LSP) impacts were investigated by means of cross-sectional optical microscopy ...and transmission electron microscopy observations. The plastic strain-induced grain refinement mechanism of the face-centered cubic (fcc) materials with very low stacking fault energy was identified. The micro-structure was obviously refined due to the ultra-high plastic strain induced by multiple LSP impacts. The minimum grain size in the top surface was about 50–200
nm. Multidirectional mechanical twin matrix (MT)–MT intersections led to grain subdivision at the top surface during multiple LSP impacts. Furthermore, a novel structure with submicron triangular blocks was found at the top surface subjected to three LSP impacts. The grain refinement process along the depth direction after multiple LSP impacts can be described as follows: (i) formation of planar dislocation arrays (PDAs) and stacking faults along multiple directions due to the pile up of dislocation lines; (ii) formation of submicron triangular blocks (or irregularly shaped blocks) by the intersection of MT–MT (or MT–PDA or PDA–PDA) along multiple directions; (iii) transformation of MTs into subgrain boundaries; (iv) evolution by continuous dynamic recrystallization of subgrain boundaries to refined grain boundaries. The experimental results and analyses indicate that a high strain with an ultra-high strain rate play a crucial role in the grain refinement process of fcc materials subjected to multiple LSP impacts.
Face-centered-cubic (fcc) type high entropy alloys (HEAs) exhibit outstanding ductility even at the liquid nitrogen temperature, but they are relatively weak in strength which is far from the ...requirements for practical structural applications. One of the general concepts employed previously in alloy design is the suppression of ‘brittle’ intermetallic compound formation which usually leads to a serious embrittlement. Surprisingly, we reveal in this study that the precipitation of hard σ and μ intermetallic compounds tremendously strengthened the CoCrFeNiMo0.3 HEA but without causing a serious embrittlement. It exhibits a tensile strength as high as 1.2 GPa and a good ductility of ∼19%. A careful study of the deformation behavior reveals that the fcc matrix exhibits an extremely high work hardening exponent of 0.75, which suppresses the propagation of microcracks originated at these brittle particles. Our work presents a very successful demonstration of using complex hard intermetallic particles to manipulate the properties of fcc-type HEA systems. Furthermore, lattice distortion has been carefully measured in powder-metallurgy materials by line broadening from X-ray diffraction (XRD). It is interesting to discover that lattice planes are highly distorted in HEAs and this distortion also contributes to solid solution hardening.
▪
► Effects of LSP on mechanical properties of stainless steel ANSI 304 are evaluated. ► LSP can clearly enhance the values of mechanical properties in the shocked region. ► Martensite transformation ...does not take place in the surface layer subjected to LSP. ► Enhancement mechanisms of LSP on mechanical property of stainless steel are revealed. ► The results can provide some insights on the surface modification of stainless steel.
The aim of this article is to address the effects of a single laser shock processing (LSP) impact on the nano-hardness, elastic modulus, residual stress and phase transformation of ANSI 304 austenitic stainless steel. Residual stress distribution of the LSP-shocked region is determined by X-ray diffraction (XRD) with sin
2
ψ method, and the micro-structural features in the near-surface layer are characterized by using cross-sectional optical microscopy (OM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). By comparing with the untreated samples, LSP can clearly improve nano-hardness, elastic modulus, and residual stress in the LSP-shocked region. The underlying enhancement mechanisms of LSP on nano-hardness, elastic modulus and residual stress of stainless steel ANSI 304 are also revealed. These studies may provide some important insights into surface modification for metal materials.
We report on near-GeV electron beam generation from an all-optical cascaded laser wakefield accelerator (LWFA). Electron injection and acceleration are successfully separated and controlled in ...different LWFA stages by employing two gas cells filled with a He/O2 mixture and pure He gas, respectively. Electrons with a Maxwellian spectrum, generated from the first LWFA assisted by ionization-induced injection, were seeded into the second LWFA with a 3-mm-thick gas cell and accelerated to be a 0.8-GeV quasimonoenergetic electron beam, corresponding to an acceleration gradient of 187 GV/m. The demonstrated scheme paves the way towards the multi-GeV laser accelerators.
Esterase has been reported to be involved in malathion resistance in the oriental fruit fly, Bactrocera dorsalis (Hendel). However, the underlying molecular mechanism of the esterase‐mediated ...resistance remains largely unknown in this species. Here, with the use of a strain selected for malathion resistance in the laboratory (MR), we found that two overexpressed α‐esterase genes, namely BdCarE4 and BdCarE6, predominant in the adult midgut and fat body, function in conferring malathion resistance in B. dorsalis. Notably, these two genes were found to be mostly close to the esterase E3, which are usually implicated in detoxifying organophosphate insecticides. The transcript levels of BdCarE4 and BdCarE6 were investigated and compared between the MR and a susceptible (MS) strain of B. dorsalis. Both genes were significantly up‐regulated in the MR strain, which was consistent with the enhanced esterase activity in the MR strain. However, no changes in either the coding sequence or gene copy number were observed between the two strains. Subsequently, heterologous expression combined with cytotoxicity assay in Sf9 cells demonstrated that BdCarE4 and BdCarE6 can probably detoxify malathion. Furthermore, RNA interference‐mediated knockdown of each of these two genes significantly increased malathion susceptibility in the MR strain adults. In conclusion, these results expand our molecular understanding of the important role of α‐esterases during the development of resistance to organophosphorous insecticides in B. dorsalis.
The aim of this study was to develop a widely accepted prognostic nomogram for extranodal NK/T-cell lymphoma, nasal-type (NKTCL). The clinical data from 1383 patients with NKTCL treated at 10 ...participating institutions between 2000 and 2011 were reviewed. A nomogram was developed that predicted overall survival (OS) based on the Cox proportional hazards model. To contrast the utility of the nomogram against the widely used Ann Arbor staging system, the International Prognostic Index (IPI) and the Korean Prognostic Index (KPI), we used the concordance index (C-index) and a calibration curve to determine its predictive and discriminatory capacity. The 5-year OS rate was 60.3% for the entire group. The nomogram included five important variables based on a multivariate analysis of the primary cohort: stage; age; Eastern Cooperative Oncology Group performance status; lactate dehydrogenase; and primary tumor invasion. The calibration curve showed that the nomogram was able to predict 5-year OS accurately. The C-index of the nomogram for OS prediction was 0.72 for both cohorts, which was superior to the predictive power (range, 0.56-0.64) of the Ann Arbor stage, IPI and KPI in the primary and validation cohorts. The proposed nomogram provides an individualized risk estimate of OS in patients with NKTCL.
The cross section for the process e^{+}e^{-}→π^{+}π^{-}J/ψ is measured precisely at center-of-mass energies from 3.77 to 4.60 GeV using 9 fb^{-1} of data collected with the BESIII detector operating ...at the BEPCII storage ring. Two resonant structures are observed in a fit to the cross section. The first resonance has a mass of (4222.0±3.1±1.4) MeV/c^{2} and a width of (44.1±4.3±2.0) MeV, while the second one has a mass of (4320.0±10.4±7.0) MeV/c^{2} and a width of (101.4_{-19.7}^{+25.3}±10.2) MeV, where the first errors are statistical and second ones are systematic. The first resonance agrees with the Y(4260) resonance reported by previous experiments. The precision of its resonant parameters is improved significantly. The second resonance is observed in e^{+}e^{-}→π^{+}π^{-}J/ψ for the first time. The statistical significance of this resonance is estimated to be larger than 7.6σ. The mass and width of the second resonance agree with the Y(4360) resonance reported by the BABAR and Belle experiments within errors. Finally, the Y(4008) resonance previously observed by the Belle experiment is not confirmed in the description of the BESIII data.
PDF
