Montmorillonite (Mt) is a kind of 2:1 type layered phyllosilicate mineral with nanoscale structure, large surface area, high cation exchange capacity and excellent adsorption capacity. By virtue of ...such unique properties, many scholars have paid much attention to the further modification of Mt-based two-dimensional (2D) functional composite materials, such as Mt-metal hydroxides and Mt-carbon composites. In this review, we focus on two typical Mt-2D nanocomposite: Mt@layered double hydroxide (Mt@LDH) and Mt@graphene (Mt@GR) and their fabrication strategies, as well as their important applications in pollution adsorption, medical antibacterial, film thermal conduction and flame-retardant. In principle, the prospective trend of the composite preparation of Mt-2D nancomposites and promising fields are well addressed.
In this work, a novel core-shell structure material, NiFe layered double hydroxide (NiFe LDH) loaded on SiO2 microspheres (SiO2@NiFe LDH), was synthesized by a one-step hydrothermal method, and the ...spontaneous electrostatic self-assembly process. The morphology, structure, and microwave absorption properties of SiO2@NiFe LDH nanocomposites with different NiFe element ratios were systematically investigated. The results show that the sample of SiO2@NiFe LDH-3 nanocomposite has excellent microwave absorption properties. It exhibits broadband effective absorption bandwidth (RL < −10 dB) of 8.24 GHz (from 9.76 GHz to 18.0 GHz) and the reflection loss is −53.78 dB at the matched thickness of 6.95 mm. It is expected that this SiO2@NiFe-LDH core-shell structural material can be used as a promising non-precious, metal-based material microwave absorber to eliminate electromagnetic wave contamination.
A neoteric round sieve diatomite (De) decorated with sea-urchin-like alpha-type iron trioxide (α-Fe2O3) synthetics was prepared by the hydrothermal method and further calcination. The results of the ...electromagnetic (EM) parameters of α-Fe2O3-decorated De (α-Fe2O3@D) showed that the minimum reflection loss (RLmin) of α-Fe2O3@D could reach −54.2 dB at 11.52 GHz and the matched absorber thickness was 3 mm. The frequency bandwidth corresponding to the microwave RL value below −20 dB was up to 8.24 GHz (9.76–18 GHz). This indicates that α-Fe2O3@D composite can be a lightweight and stable material; because of the low density of De (1.9–2.3 g/cm3), the density of α-Fe2O3@D composite material is lower than that of α-Fe2O3 (5.18 g/cm3). We found that the combination of the magnetic loss of sea-urchin-like α-Fe2O3 and the dielectric loss of De has the most dominant role in electromagnetic wave absorption and loss. We focused on comparing the absorbing properties before and after the formation of sea-urchin-like α-Fe2O3 and explain in detail the effects of the structure and crystal shape of this novel composite on the absorbing properties.
Considering the electromagnetic protection needs of important ground buildings, exploring the electromagnetic wave (EMW) absorption performance of manganese ore powder (MOP) building materials is an ...effective way to overcome its low added value and difficulty in popularizing. Here, choosing filling ratios commonly used in building materials such as autoclaved bricks, MOP/paraffin samples with 20%, 40%, and 60% mass fraction of MOP were prepared, and electromagnetic properties were analyzed at 2–18 GHz using the coaxial method. The results show that 60 wt% sample has the best absorption performance, with a minimum reflection loss (RLmin) value of −22.06 dB at 15.04 GHz, and the effective absorption bandwidth (EAB, RL < −10 dB) reaches 4.16 GHz at a 7.65 mm absorber thickness, covering most of the Ku-band region. The excellent microwave absorption performance of MOP is due to its multi-oxide forming multi-interface structure and rough surface, which can not only form abundant dipole and interfacial polarization under the action of EMW, but also reflect and scatter the incident EMW, prolong the transmission path, and enhanced the absorption of microwaves. This study demonstrates that MOP building materials can have excellent microwave absorption properties, thus becoming a new way to address harmful manganese residue; for example, autoclaved bricks, which can not only improve the added value of manganese residue building materials but also can be consumed on a large scale. It provides a new idea to solve the harm of manganese residue.
Recently, the development of composite materials composed of magnetic materials and MXene has attracted significant attention. However, the thickness and microwave absorption performance of the ...composite is still barely satisfactory. In this work, the C-N@NiFe2O4@MXene/Ni nanocomposites were successfully synthesized in situ by hydrothermal and calcination methods. Benefiting from the introduction of the carbon-nitrogen(C-N) network structure, the overall dielectric properties are improved effectively, consequently reducing the thickness of the composite while maintaining excellent absorption performance. As a result, the minimum reflection loss of C-N@NiFe2O4@MXene/Ni can reach −50.51 dB at 17.3 GHz at an ultralow thickness of 1.5 mm, with an effective absorption bandwidth of 4.95 GHz (13.02–18 GHz). This research provides a novel strategy for materials to maintain good absorption performance at an ultralow thickness level.
•Magnesium compounds and their composites for supercapacitors were highlighted.•Various regulative strategies and their mechanisms for regulating the electrochemical properties of magnesium compounds ...were collected.•The challenges and outlooks of magnesium compounds in high performance supercapacitors have been discussed.
The application of Mg-based electrochemical energy storage materials in high performance supercapacitors is an essential step to promote the exploitation and utilization of magnesium resources in the field of energy storage. Unfortunately, the inherent chemical properties of magnesium lead to poor cycling stability and electrochemical reactivity, which seriously limit the application of Mg-based materials in supercapacitors. Herein, in this review, more than 70 research papers published in recent 10 years were collected and analyzed. Some representative research works were selected, and the results of various regulative strategies to improve the electrochemical performance of Mg-based materials were discussed. The effects of various regulative strategies (such as constructing nanostructures, synthesizing composites, defect engineering, and binder-free synthesis, etc.) on the electrochemical performance and their mechanism are demonstrated using spinel-structured MgX2O4 and layered structured Mg-X-LDHs as examples. In addition, the application of magnesium oxide and magnesium hydroxide in electrode materials, MXene's solid spacers and hard templates are introduced. Finally, the challenges and outlooks of Mg-based electrochemical energy storage materials in high performance supercapacitors are also discussed.
Reasonable structural design and composition control are the dominant factors for tuning the electromagnetic absorbing properties of materials. In this paper, microspheres composed of NiO, Ni, and ...Co3O4 nanoparticles (NCMO) were successfully synthesized using a mild oxidation method. Benefiting from the multi-component composition and a unique microstructure, the RLmin of CNMO can reach −46.8 dB at 17 GHz, with an effective absorption bandwidth of 4.1 GHz (13.9–18 GHz). The absorbing properties and the absorbing mechanism analysis showed that the microsphere-structured NCMO composed of multi-component nanoparticles enhanced the interface polarization, thereby improving the absorption performance. This research provides a new avenue for MOF-derived oxide materials with excellent electromagnetic wave absorbing properties.
Epoxy resin powder coating has been successfully applied on the corrosion protection of magnesium lithium alloys. However, poor wear resistance and microcracks formed during the solidification have ...limited it extensive application. There are limited approaches to exploit such anti-corrosion and mechanical properties of magnesium lithium alloys. Herein, the epoxy resin powder coating with polydopamine modified molybdenum disulfide (MoS2@PDA-EP powder coating with 0, 0.1, 0.2, 0.5, 1.0 wt.% loading) was well prepared by melt extrusion to investigate its anticorrosion performance and wear resistance. The results revealed that the addition of MoS2@PDA enhanced the adhesion strength between coatings and alloys, wear resistance and corrosion protection of the powder coatings. Among them, the optimum was obtained by 0.2 wt.% MoS2@PDA-EP powder coating which could be attributed to well dispersion and efficient adhesion with coating matrix. To conclude, MoS2@PDA-EP powder coating is meaningfully beneficial for the anticorrosive and wear performance improvement of magnesium lithium alloys.
The effects of three pyridine derivative additives, 4-hydroxypyridine, 4-picolinic acid, and 4-cyanopyridine, on Al-Mn coatings were investigated in 1-ethyl-3-methylimidazolium chloride-AlCl3-MnCl2 ...(EMIC-AlCl3-MnCl2) ionic liquids. The smooth mirror-like bright Al-Mn coatings were obtained only in the EMIC-AlCl3-MnCl2 ionic liquids containing 4-cyanopyridine, while the matte Al-Mn coatings were electrodeposited from EMIC-AlCl3-MnCl2 without additives or containing either 4-hydroxypyridine or 4-picolinic acid. The scanning electron microscope and X-ray diffraction showed that the bright Al-Mn coatings consisted of nanocrystals and had a strong (200) preferential orientation, while the particle size of matte Al-Mn coatings were within the micron range. The brightening mechanism of 4-cyanopyridine is due to it being adsorbed onto the cathode to produce the combined effect of (1) generating an overpotential to promote Al-Mn nucleation; (2) inhibiting the growth of the deposited nuclei and enabling them grow preferentially, making the coating composed of nanocrystals and with a smooth surface. The brightening effect of 4-cyanopyridine on the Al-Mn coatings was far better than that of the 4-hydroxypyridine and the 4-picolinic acid. In addition, the bright Al-Mn coating was prepared in a bath with 6 mmol·L−1 4-cyanopyridine and displayed superior corrosion resistance relative to the matte coatings, which could be attributed to its unique nanocrystalline structure that increased the number of grain boundaries and accelerated the formation of the protective layer of the corrosion products.
The construction of highly active catalysts for methanol oxidation reaction (MOR) is central to direct methanol fuel cells. Tremendous progress has been made in transition metal phosphides (TMPs) ...based catalysts. However, TMPs would be partially damaged and transformed into new substances (e.g., Pt-M-P composite, where M represents a second transition metal) during Pt deposition process. This would pose a large obstacle to the cognition of the real promoting effects of TMPs in MOR. Herein, Co2P co-catalysts (Pt-P/Co2P@NPC, where NPC stands for N and P co-doped carbon) and Pt-Co-P composite catalysts (Pt-Co-P/NPC) were controllably synthesized. Electrocatalysis tests show that the Pt-Co-P/NPC exhibits superior MOR activity as high as 1016 mA/mgPt, significantly exceeding that of Pt-P/Co2P@NPC (345 mA/mgPt). This result indicates that the promoting effect is ascribed primarily to the resultant Pt-Co-P composite, in sharply contrast to previous viewpoint that Co2P itself improves the activity. Further mechanistic studies reveal that Pt-Co-P/NPC exhibits much stronger electron interaction and thus manifesting a remarkably weaker CO absorption than Pt-P/Co2P@NPC and Pt/C. Moreover, Pt-Co-P is also more capable of producing oxygen-containing adsorbate and thus accelerating the removal of surface-bonded CO*, ultimately boosting the MOR performance.
The real promoting species is the resultant Pt-Co-P composite rather than Co2P itself when Co2P is applied as a co-catalyst for MOR. Our study provides a new insight into the promoting effects of transition metal phosphides in MOR. Display omitted