The Acheulean technological tradition, characterized by a large (>10 cm) flake-based component, represents a significant technological advance over the Oldowan. Although stone tool assemblages ...attributed to the Acheulean have been reported from as early as circa 1.6–1.75 Ma, the characteristics of these earliest occurrences and comparisons with later assemblages have not been reported in detail. Here, we provide a newly established chronometric calibration for the Acheulean assemblages of the Konso Formation, southern Ethiopia, which span the time period ∼1.75 to <1.0 Ma. The earliest Konso Acheulean is chronologically indistinguishable from the assemblage recently published as the world’s earliest with an age of ∼1.75 Ma at Kokiselei, west of Lake Turkana, Kenya. This Konso assemblage is characterized by a combination of large picks and crude bifaces/unifaces made predominantly on large flake blanks. An increase in the number of flake scars was observed within the Konso Formation handaxe assemblages through time, but this was less so with picks. The Konso evidence suggests that both picks and handaxes were essential components of the Acheulean from its initial stages and that the two probably differed in function. The temporal refinement seen, especially in the handaxe forms at Konso, implies enhanced function through time, perhaps in processing carcasses with long and stable cutting edges. The documentation of the earliest Acheulean at ∼1.75 Ma in both northern Kenya and southern Ethiopia suggests that behavioral novelties were being established in a regional scale at that time, paralleling the emergence of Homo erectus- like hominid morphology.
In situ UV laser spot 40Ar/39Ar analyses of distinct phengite types in eclogite-facies rocks from the Sesia-Lanzo Zone (Western Alps, Italy) were combined with SIMS boron isotope analyses as well as ...boron (B) and lithium (Li) concentration data to link geochronological information with constraints on fluid–rock interaction. In weakly deformed samples, apparent 40Ar/39Ar ages of phengite cores span a range of ∼20Ma, but inverse isochrons define two distinct main high-pressure (HP) phengite core crystallization periods of 88–82 and 77–74Ma, respectively. The younger cores have on average lower B contents (∼36μg/g) than the older ones (∼43–48μg/g), suggesting that loss of B and resetting of the Ar isotopic system were related. Phengite cores have variable δ11B values (−18‰ to −10‰), indicating the lack of km scale B homogenization during HP crystallization.
Overprinted phengite rims in the weakly deformed samples generally yield younger apparent 40Ar/39Ar ages than the respective cores. They also show variable effects of heterogeneous excess 40Ar incorporation and Ar loss. One acceptable inverse isochron age of 77.1±1.1Ma for rims surrounding older cores (82.6±0.6Ma) overlaps with the second period of core crystallization. Compared to the phengite cores, all rims have lower B and Li abundances but similar δ11B values (−15‰ to −9‰), reflecting internal redistribution of B and Li and internal fluid buffering of the B isotopic composition during rim growth. The combined observation of younger 40Ar/39Ar ages and boron loss, yielding comparable values of both parameters only in cores and rims of different samples, is best explained by a selective metasomatic overprint. In low permeability samples, this overprint caused recrystallization of phengite rims, whereas higher permeability in other samples led to complete recrystallization of phengite grains.
Strongly deformed samples from a several km long, blueschist-facies shear zone contain mylonitic phengite that forms a tightly clustered group of relatively young apparent 40Ar/39Ar ages (64.7–68.8Ma), yielding an inverse isochron age of 65.0±3.0Ma. Almost complete B and Li removal in mylonitic phengite is due to leaching into a fluid. The B isotopic composition is significantly heavier than in phengites from the weakly deformed samples, indicating an external control by a high-δ11B fluid (δ11B=+7±4‰). We interpret this result as reflecting phengite recrystallization related to deformation and associated fluid flow in the shear zone. This event also caused partial resetting of the Ar isotope system and further B loss in more permeable rocks of the adjacent unit. We conclude that geochemical evidence for pervasive or limited fluid flow is crucial for the interpretation of 40Ar/39Ar data in partially metasomatized rocks.
The northern part of the Pamir orogen is the preeminent example of an active intracontinental subduction zone in the early stages of continent–continent collision. Such zones are the least understood ...type of plate boundaries because modern examples are few and of limited access, and ancient analogs have been extensively overprinted by subsequent tectonic and erosion processes. In the Pamir, it has been assumed that most of the plate convergence was accommodated by overthrusting along the plate-bounding Main Pamir Thrust (MPT), which forms the principal northern mountain and deformation front of the Pamir. However, the synopsis of our new and previously published thermochronologic data from this region shows that the hanging wall of the MPT experienced relatively minor amounts of late Cenozoic exhumation. The Pamir orogen as a whole is an integral part of the overriding plate in a subduction system, while the remnant basin to the north constitutes the downgoing plate, with the bulk of the convergence accommodated by underthrusting. Herein, we demonstrate that the observed deformation of the upper and lower plates within the Pamir–Alai convergence zone resembles highly arcuate oceanic subduction systems characterized by slab rollback, subduction erosion, subduction accretion, and marginal slab-tear faults. We suggest that the curvature of the North Pamir is genetically linked to the short width and rollback of the south-dipping Alai slab; northward motion (indentation) of the Pamir is accommodated by crustal processes related to this rollback. The onset of south-dipping subduction is tentatively linked to intense Pamir contraction following break-off of the north-dipping Indian slab beneath the Karakoram.
► Pamir northward motion accommodated by slab rollback and intracontinental subduction. ► North Pamir curvature linked to short width and rollback of south-dipping Alai slab. ► Indian slab break-off leads to increased compression and regional Oligo-Miocene deformation. ► Subduction erosion of northernmost Pamir dominant during middle Miocene. ► Deformation style resembles oceanic subduction systems rather than continental collision.
The timing of the late Cenozoic collision between the Pamir salient and the Tien Shan as well as changes in the relative motion between the Pamir and Tarim are poorly constrained. The northern margin ...of the Pamir salient indented northward by ~
300
km during the late Cenozoic, accommodated by south-dipping intracontinental subduction along the Main Pamir Thrust (MPT) coupled to strike-slip faults on the eastern flank of the orogen and both strike-slip and thrust faults on the western margin. The Kashgar–Yecheng transfer system (KYTS) is the main dextral slip shear zone separating Tarim from the Eastern Pamir, with an estimated cumulative offset of ~
280
km at an average late Cenozoic dextral slip rate of 11–15
mm/a (Cowgill, 2010). In order to better constrain the slip history of the KYTS, we collected thermochronologic samples along the eastward-flowing, deeply incised, antecedent Tashkorgan–Yarkand River, which crosses the fault system on the eastern flank of the orogen. We present 29 new biotite
40Ar/
39Ar ages, apatite and zircon (U–Th–Sm)/He ages, and apatite fission track (AFT) analysis, combined with published muscovite and biotite
40Ar/
39Ar and AFT data, to create a unique thermochronologic dataset in this poorly studied and remote region. We constrain the timing of four major N-trending faults; the latter three are strands of the KYTS. The westernmost, the Kuke fault, experienced significant dip-slip, west-side-up displacement between >
12 and 6
Ma. To the east, within the KYTS, our new thermochronologic data and geomorphic observations suggest that the Kumtag and Kusilaf dextral slip faults have been inactive since at least 3–5
Ma. Long-term incision rates across the Aertashi dextral slip fault, the easternmost strand of the KYTS, are compatible with slow horizontal slip rates of 1.7–5.3
mm/a over the past 3 to 5
Ma. In summary, these data show that the slip rate of the KYTS decreased substantially during the late Miocene or Pliocene. Furthermore, Miocene–present regional kinematic reconstructions suggest that this deceleration reflects the substantial increase of northward motion of Tarim rather than a significant decrease of the northward velocity of the Pamir.
► Dextral Kashgar–Yecheng transfer system (KYTS) separates Tarim from Pamir. ► Yarkand River gorge incision rate compatible with slow Pliocene KYTS offset. ► Thermochronology suggests KYTS almost inactive since at least 3–5
Ma. ► Deceleration of KYTS reflects increase of northward motion of Tarim. ► North Pamir northward velocity may not have changed significantly during Neogene.
The Big Naryn Complex (BNC) in the East Djetim-Too Range of the Kyrgyz Middle Tianshan block is a tectonized, at least 2 km thick sequence of predominantly felsic to intermediate volcanic rocks ...intruded by porphyric rhyolite sills. It overlies a basement of metamorphic rocks and is overlain by late Neoproterozoic Djetim-Too Formation sediments; these also occur as tectonic intercalations in the BNC. The up to ca. 1100 m thick Lower Member is composed of predominantly rhyolites-to-dacites and minor basalts, while the at least 900 m thick pyroclastic Upper Member is dominated by rhyolitic-to-dacitic ignimbrites. Porphyric rhyolite sills are concentrated at the top of the Lower Member. A Lower Member rhyolite and a sill sample have LA-ICP-MS U–Pb zircon crystallization ages of 726.1 ± 2.2 Ma and 720.3 ± 6.5 Ma, respectively, showing that most of the magmatism occurred within a short time span in the late Tonian–early Cryogenian. Inherited zircons in the sill sample have Neoarchean (2.63, 2.64 Ga), Paleo- (2.33–1.81 Ga), Meso- (1.55 Ga), and Neoproterozoic (ca. 815 Ma) ages, and were derived from a heterogeneous Kuilyu Complex basement. A 1751 ± 7 Ma
40
Ar/
39
Ar age for amphibole from metagabbro is the age of cooling subsequent to Paleoproterozoic metamorphism of the Kuilyu Complex. The large amount of pyroclastic rocks, and their major and trace element compositions, the presence of Neoarchean to Neoproterozoic inherited zircons and a depositional basement of metamorphic rocks point to formation of the BNC in a continental magmatic arc setting.
The northward motion of the Pamir indenter with respect to Eurasia has resulted in coeval thrusting, strike‐slip faulting, and normal faulting. The eastern Pamir is currently deformed by east‐west ...oriented extension, accompanied by uplift and exhumation of the Kongur Shan (7719 m) and Muztagh Ata (7546 m) gneiss domes. Both domes are an integral part of the footwall of the Kongur Shan extensional fault system (KES), a 250 km long, north‐south oriented graben. Why active normal faulting within the Pamir is primarily localized along the KES and not distributed more widely throughout the orogen has remained unclear. In addition, relatively little is known about how deformation has evolved throughout the Cenozoic, despite refined estimates on present‐day crustal deformation rates and microseismicity, which indicate where crustal deformation is presently being accommodated. To better constrain the spatiotemporal evolution of faulting along the KES, we present 39 new apatite fission track, zircon U‐Th‐Sm/He, and 40Ar/39Ar cooling ages from a series of footwall transects along the KES graben shoulder. Combining these data with present‐day topographic relief, 1‐D thermokinematic and exhumational modeling documents successive stages, rather than synchronous deformation and gneiss dome exhumation. While the exhumation of the Kongur Shan commenced during the late Miocene, extensional processes in the Muztagh Ata massif began earlier and have slowed down since the late Miocene. We present a new model of synorogenic extension suggesting that thermal and density effects associated with a lithospheric tear fault along the eastern margin of the subducting Alai slab localize extensional upper plate deformation along the KES and decouple crustal motion between the central/western Pamir and eastern Pamir/Tarim basin.
Key Points
The E‐Pamir accommodates E‐W‐extension during N‐S‐convergenceGrowth of domal massifs occurs successively rather than synchronouslyIs the extension influenced by an underlying lithospheric tear fault?
We present observations from a continuous exposure of an ancient plate interface in the depth range of its former seismogenic zone in the central Alps of Europe related to Late Cretaceous‐early ...Tertiary subduction and accretion of the South Penninic lower plate underneath the Adriatic upper plate. The material forming the exposed plate interface zone has experienced flow and fracturing over an extended period of time followed by syncollisional exhumation, thus reflecting a multistage evolution. Fabric formation and metamorphism, however, chiefly record the deformation conditions of the precollisional setting along the plate interface. We identify an unstable slip domain from pseudotachylytes occurring in the temperature range between 200 and 300°C. This zone coincides with a domain of intense veining in the subduction mélange with mineral growth into open cavities, indicating fast, possibly seismic, rupture. Evidence for transient near‐lithostatic fluid pressure as well as brittle fractures competing with mylonitic shear zones continues into the region below the occurrence of pseudotachylytes, possibly reflecting a zone of conditionally stable slip. The zone above the unstable slip area is devoid of veins but displays ample evidence of fluid‐assisted processes similar to the deeper zone: solution‐precipitation creep and dehydration reactions in the mélange matrix, hydration, and sealing of the base of the upper plate. Seismic rupture here is possibly expressed by ubiquitous localized deformation zones. We hypothesize that trenchward sealing of parts of the plate interface as well as reaction‐enhanced destruction of upper plate permeability is an important component, localizing the unstable slip zone. This relation may result from the competition of the pervasive, presumably interseismic, pressure solution creep destroying permeability and building elevated fluid pressure until the strength threshold is reached with seismic failure.
The paleoclimate during the Early Eocene in Maritime Antarctica is characterized by cool conditions without a pronounced dry season. Soils formed on volcanic material under such climate conditions in ...modern analogue environments are usually Andosols rich in nanocrystalline minerals without pedogenic smectite. The paleosols formed on volcanic material on King Georges Island are covered by basalts, dated by 6 new
Ar/
Ar datings to 51-48 Ma, and are rich in smectite. A pedogenic origin of the smectites would suggest a semi-arid rather than a wet non-seasonal humid paleoclimate. To investigate the origin of the smectites in these paleosols we used X-ray diffraction and microscopic techniques. Minor mineralogical changes between the volcanic parent material and the paleosols and a homogenous distribution of smectites throughout the paleosol horizons indicate that these smectites were mainly inherited from the pyroclastic parent material, which was altered prior to surficial weathering. Nevertheless, the mineralogical properties, such as degree of crystallinity and octahedral site occupancy, of these smectites were modified during the ancient soil formation. Our findings highlight that trioctahedral smectites were a product of deuteric alteration of pyroclastic rocks and were progressively transformed to dioctahedral smectites during weathering in a soil environment on King George Island.
In the Gasht-Masuleh area in the Alborz Mountains, gabbroic magma intruded Palaeozoic metasediments and Mesozoic sediments and crystallised as isotropic and cumulate gabbros. LREE enrichment points ...to relatively low degrees of mantle melting and depletion of Ti, Nb and Ta relative to primitive mantle points to an arc related component in the magma. Clinopyroxene compositions indicate MORB to arc signatures. U–Pb zircon crystallisation ages of 99.5 ± 0.6 Ma and 99.4 ± 0.6 Ma and phlogopite
40
Ar/
39
Ar ages of 97.1 ± 0.4 Ma, 97.5 ± 0.4 Ma, 97.1 ± 0.1 Ma, within 2σ error, indicate that gabbro intrusion occurred in the (Albian-)Cenomanian (mid-Cretaceous). As active subduction did not take place in the Cretaceous in North Iran, the small volume mafic magmatism in the Gasht-Masuleh area must be due to local, extension-related mantle melting. Melting was most likely caused by far field effects triggered by roll-back of the Neo-Tethys subducting slab. As subduction took place at a distance of ~ 400 km (present distance) from the Alborz Mountains, the observed arc geochemical signatures must be inherited from a previous subduction event and concomitant mantle metasomatism, possibly in combination with contamination of the magma by crustal material.
Highlights
Gasht-Masuleh gabbros calc-alkaline, extensional setting, inherited arc signature
(Albian-) Cenomanian, 99 Ma zircon ages
97–98 Ma
40
Ar/
39
Ar phlogopite ages
Mantle upwelling and formation of gabbros triggered by Neo-Tethys slab roll-back causing extension
During the period 750–600 Ma ago, prior to the final break-up of the supercontinent Rodinia, the crust of both the North American Craton and Baltica was intruded by significant amounts of ...rift-related magmas originating from the mantle. In the Proterozoic crust of Southern Norway, the 580 Ma old Fen carbonatite-ultramafic complex is a representative of this type of rocks. In this paper, we report the occurrence of an ultramafic lamprophyre dyke which possibly is linked to the Fen complex, although 40Ar/39Ar data from phenocrystic phlogopite from the dyke gave an age of 686 ± 9 Ma. The lamprophyre dyke was recently discovered in one of the Kongsberg silver mines at Vinoren, Norway. Whole rock geochemistry, geochronological and mineralogical data from the ultramafic lamprophyre dyke are presented aiming to elucidate its origin and possible geodynamic setting. From the whole-rock composition of the Vinoren dyke, the rock could be recognized as transitional between carbonatite and kimberlite-II (orangeite). From its diagnostic mineralogy, the rock is classified as aillikite. The compositions and xenocrystic nature of several of the major and accessory minerals from the Vinoren aillikite are characteristic for diamondiferous rocks (kimberlites/lamproites/UML): Phlogopite with kinoshitalite-rich rims, chromite-spinel-ulvöspinel series, Mg- and Mn-rich ilmenites, rutile and lucasite-(Ce). We suggest that the aillikite melt formed during partial melting of a MARID (mica-amphibole-rutile-ilmenite-diopside)-like source under CO2 fluxing. The pre-rifting geodynamic setting of the Vinoren aillikite before the Rodinia supercontinent breakup suggests a relatively thick SCLM (Subcontinental Lithospheric Mantle) during this stage and might indicate a diamond-bearing source for the parental melt. This is in contrast to the about 100 Ma younger Fen complex, which were derived from a thin SCLM.
PDF
