Currently, the authorisation process for plant protection products (PPPs) relies on the testing of acute and topological toxicity only. Contrastingly, the evaluation of active substances includes a ...more comprehensive set of toxicity studies. Nevertheless, mixture effects of active ingredients and co-formulants may result in increased toxicity. Therefore, we investigated effects of surface active co-formulants on the toxicity of two PPPs focussing on qualitative and quantitative toxicokinetic effects on absorption and secretion. The respective products are based on the active substances abamectin and fluroxypyr-meptyl and were tested for cytotoxicity in the presence or absence of the corresponding surfactants and co-formulants using Caco-2 cells. In addition, the effect of co-formulants on increased cellular permeation was quantified using LC–MS/MS, while potential kinetic mixture effects were addressed by fluorescence anisotropy measurements and ATPase assays. The results show that surface active co-formulants significantly increase the cytotoxicity of the investigated PPPs, leading to more than additive mixture effects. Moreover, analytical investigations show higher efflux ratios of both active substances and the metabolite fluroxypyr upon combination with certain concentrations of the surfactants. The results further point to a significant and concentration-dependent inhibition of Pgp transporters by most of the surfactants as well as to increased membrane fluidity. Altogether, these findings strongly support the hypothesis that surfactants contribute to increased cytotoxicity of PPPs and do so by increasing the bioavailability of the respective active substances.
Aluminium is one of the most abundant elements in earth’s crust and its manifold uses result in an exposure of the population from many sources. Developmental toxicity, effects on the urinary tract ...and neurotoxicity are known effects of aluminium and its compounds. Here, we assessed the health risks resulting from total consumer exposure towards aluminium and various aluminium compounds, including contributions from foodstuffs, food additives, food contact materials (FCM), and cosmetic products. For the estimation of aluminium contents in foodstuff, data from the German “Pilot-Total-Diet-Study” were used, which was conducted as part of the European TDS-Exposure project. These were combined with consumption data from the German National Consumption Survey II to yield aluminium exposure via food for adults. It was found that the average weekly aluminium exposure resulting from food intake amounts to approx. 50% of the tolerable weekly intake (TWI) of 1 mg/kg body weight (bw)/week, derived by the European Food Safety Authority (EFSA). For children, data from the French “Infant Total Diet Study” and the “Second French Total Diet Study” were used to estimate aluminium exposure via food. As a result, the TWI can be exhausted or slightly exceeded—particularly for infants who are not exclusively breastfed and young children relying on specially adapted diets (e.g. soy-based, lactose free, hypoallergenic). When taking into account the overall aluminium exposure from foods, cosmetic products (cosmetics), pharmaceuticals and FCM from uncoated aluminium, a significant exceedance of the EFSA-derived TWI and even the PTWI of 2 mg/kg bw/week, derived by the Joint FAO/WHO Expert Committee on Food Additives, may occur. Specifically, high exposure levels were found for adolescents aged 11–14 years. Although exposure data were collected with special regard to the German population, it is also representative for European and comparable to international consumers. From a toxicological point of view, regular exceedance of the lifetime tolerable aluminium intake (TWI/PTWI) is undesirable, since this results in an increased risk for health impairments. Consequently, recommendations on how to reduce overall aluminium exposure are given.
Article Highlights
Risk assessment of total aluminium exposure from different sources for different age groups.
Use of data from the European TDS-Exposure project for the estimation of aluminium exposure from foodstuff.
Comprehensive overview of the toxicological properties of aluminium.
In light of an ever-increasing exposure to chemicals, the topic of potential mixture toxicity has gained increased attention, particularly as the toxicological toolbox to address such questions has ...vastly improved. Routinely toxicological risk assessments will rely on the analysis of individual compounds with mixture effects being considered only in those specific cases where co-exposure is foreseeable, for example for pesticides or food contact materials. In the field of pesticides, active substances are summarized in so-called cumulative assessment groups (CAG) which are primarily based on their toxicodynamic properties, that is, respective target organs and mode of action (MoA). In this context, compounds causing toxicity by a similar MoA are assumed to follow a model of dose/concentration addition (DACA). However, the respective approach inherently falls short of addressing cases where there are dissimilar or independent MoAs resulting in wider toxicokinetic effects. Yet, the latter are often the underlying cause when effects deviate from the DACA model. In the present manuscript, we therefore suggest additionally to consider toxicokinetic effects (especially related to xenobiotic metabolism and transporter interaction) for the grouping of substances to predict mixture toxicity. In line with the concept of MoA-based CAGs, we propose common kinetics groups (CKGs) as an additional tool for grouping of chemicals and mixture prioritization. Fundamentals of the CKG concept are discussed, along with challenges for its implementation, and methodological approaches and examples are explored.
Driven by the fast paced development of complex test systems in vitro, mass spectrometry and omics, we finally have the tools to unravel the molecular events that underlie toxicological adversity. ...Yet, timely regulatory adaptation of these new tools continues to pose major challenges even for organs readily accessible such as skin. The reasons for this encompass a need for conservatism as well as the need of tests to serve an existing regulatory framework rather than to produce scientific knowledge. It is important to be aware of this in order to align regulatory skin toxicity with the 3R principles more readily. While most chemical safety testing is still based on animal data, regulatory frameworks have seen a strong push towards non‐animal approaches. The endpoints corrosion, irritation, sensitisation, absorption and phototoxicity, for example, can now be covered in vitro with the corresponding test guidelines (TGs) being made available by the OECD. However, in vitro approaches tend to be more reductionist. Hence, a combination of several tests is usually preferable to achieve satisfying predictivity. Moreover, the test systems and their combined use need to be standardised and are therefore subject not only to validation but also to the ongoing development of so‐called integrated approaches to testing and assessment (IATAs). Concomitantly, skin models are being refined to deliver the complexity required for increased applicability and predictivity. Given the importance of regulatory applicability for 3R‐derived approaches to have a long‐lasting impact, this review examines the state of regulatory implementation and perspectives, respectively.
A scientific review of colorful textiles Nicolai, Suna; Tralau, Tewes; Luch, Andreas ...
Journal für Verbraucherschutz und Lebensmittelsicherheit,
03/2021, Volume:
16, Issue:
1
Journal Article
Peer reviewed
Open access
Textiles, especially apparel, play an essential role in our daily life. Given that nearly everybody is in contact with clothes and other textiles 24 h a day, they have to be safe. Today’s ...manufacturing processes depend on the use of many different chemicals, including dyes. An ideal dye would stay within the fabric during use. However, most textile dyes are prone to leaching and wear-off. Ideally, the industry is trying to keep the respective release of dyestuffs as low as possible. Concomitantly, toxicological risk assessment has to evaluate whether the released amounts are safe based on the substance-inherent characteristics and expected levels of exposure. So far, assessments of the latter are mostly based on what little data is available. Although the use of worst-case scenarios makes systematic overestimation likely and thus warrants a sufficiently high level of consumer protection, existing data gaps should be filled in order to end this unsatisfactory situation. Hence, in a first step this paper compiles and analyzes available data on the migration of dyes from textile materials, dermal dye uptake, and possible reductive cleavage of azo dyes by the skin microbiome as well as the dermal uptake of the resulting cleavage products.
A medical-toxicological view of tattooing Laux, Peter, PhD; Tralau, Tewes, PhD; Tentschert, Jutta, PhD ...
The Lancet (British edition),
01/2016, Volume:
387, Issue:
10016
Journal Article
Peer reviewed
Summary Long perceived as a form of exotic self-expression in some social fringe groups, tattoos have left their maverick image behind and become mainstream, particularly for young people. ...Historically, tattoo-related health and safety regulations have focused on rules of hygiene and prevention of infections. Meanwhile, the increasing popularity of tattooing has led to the development of many new colours, allowing tattoos to be more spectacular than ever before. However, little is known about the toxicological risks of the ingredients used. For risk assessment, safe intradermal application of these pigments needs data for toxicity and biokinetics and increased knowledge about the removal of tattoos. Other concerns are the potential for phototoxicity, substance migration, and the possible metabolic conversion of tattoo ink ingredients into toxic substances. Similar considerations apply to cleavage products that are formed during laser-assisted tattoo removal. In this Review, we summarise the issues of concern, putting them into context, and provide perspectives for the assessment of the acute and chronic health effects associated with tattooing.
The majority of printing inks are based on mineral oils (MOs) which contain complex mixtures of saturated and aromatic hydrocarbons. Consumer exposure to these oils occurs either through direct skin ...contacts or, more frequently, as a result of MO migration into the contents of food packaging that was made from recycled newspaper. Despite this ubiquitous and frequent exposure little is known about the potential toxicological effects, particularly with regard to the aromatic MO fractions. From a toxicological point of view the huge amount of alkylated and unsubstituted compounds therein is reason for concern as they can harbor genotoxicants as well as potential endocrine disruptors. The aim of this study was to assess both the genotoxic and estrogenic potential of MOs used in printing inks. Mineral oils with various aromatic hydrocarbon contents were tested using a battery of in vitro assays selected to address various endpoints such as estrogen-dependent cell proliferation, activation of estrogen receptor α or transcriptional induction of estrogenic target genes. In addition, the comet assay has been applied to test for genotoxicity. Out of 15 MOs tested, 10 were found to potentially act as xenoestrogens. For most of the oils the effects were clearly triggered by constituents of the aromatic hydrocarbon fraction. From 5 oils tested in the comet assay, 2 showed slight genotoxicity. Altogether it appears that MOs used in printing inks are potential endocrine disruptors and should thus be assessed carefully to what extent they might contribute to the total estrogenic burden in humans.
Alterations in thyroid hormones (TH) and thyroid-stimulating hormone levels are frequently found following exposure to chemicals of concern. Dysregulation of TH levels can severely perturb ...physiological growth, metabolism, differentiation, homeostasis in the adult and developmental processes in utero. A frequently identified mode of action for this interaction is the induction of hepatic detoxification mechanisms (e.g. SULTs and UGTs), which lead to TH conjugation and elimination and therefore interfere with hormonal homeostasis, fulfilling the endocrine disruptors (EDs) definition. A short-term study in rats with dietary exposure to cyproconazole, epoxiconazole and prochloraz was conducted and hepatocyte hypertrophy, hepatic UGT activity and Phase 1/2 gene expression inductions were observed together with changes in TH levels and thyroid follicular hypertrophy and hyperplasia. To test for specific interaction with the thyroid hormone system, in vitro assays were conducted covering thyroidal I-uptake (NIS), TH transmembranal transport via MCT8 and thyroid peroxidase (TPO) function. Assays for iodothyronine deiodinases (DIO1-DIO3) and iodotyrosine deiodinase (DEHAL1) were included, and from the animal experiment, Dio1 and Dehal1 activities were measured in kidney and liver as relevant local indicators and endpoints. The fungicides did not affect any TH-specific KEs, in vitro and in vivo, thereby suggesting hepatic conjugation as the dominant MoA.
Polycyclic aromatic hydrocarbons (PAH) such as benzo
pyrene (B
P) are among the most abundant environmental pollutants, resulting in continuous exposure of human skin and its microbiota. However, ...effects of the latter on B
P toxicity, absorption, metabolism, and distribution in humans remain unclear. Here, we demonstrate that the skin microbiota does metabolize B
P on and in human skin
, using a recently developed commensal skin model. In this model, microbial metabolism leads to high concentrations of known microbial B
P metabolites on the surface as well as in the epidermal layers. In contrast to what was observed for uncolonized skin, B
P and its metabolites were subject to altered rates of skin penetration and diffusion, resulting in up to 58% reduction of metabolites recovered from basal culture medium. The results indicate the reason for this altered behavior to be a microbially induced strengthening of the epidermal barrier. Concomitantly, colonized models showed decreased formation and penetration of the ultimate carcinogen B
P-7,8-dihydrodiol-9,10-epoxide (BPDE), leading, in consequence, to fewer BPDE-DNA adducts being formed. Befittingly, transcript and expression levels of key proteins for repairing environmentally induced DNA damage such as xeroderma pigmentosum complementation group C (XPC) were also found to be reduced in the commensal models, as was expression of B
P-associated cytochrome P450-dependent monooxygenases (CYPs). The results show that the microbiome can have significant effects on the toxicology of external chemical impacts. The respective effects rely on a complex interplay between microbial and host metabolism and microbe-host interactions, all of which cannot be adequately assessed using single-system studies.
Exposure to xenobiotics has repeatedly been associated with adverse health effects. While the majority of reported cases relate to direct substance effects, there is increasing evidence that microbiome-dependent metabolism of xenobiotic substances likewise has direct adverse effects on the host. This can be due to microbial biotransformation of compounds, interaction between the microbiota and the host's endogenous detoxification enzymes, or altered xenobiotic bioavailability. However, there are hardly any studies addressing the complex interplay of such interactions
and less so in human test systems. Using a recently developed microbially competent three-dimensional (3D) skin model, we show here for the first time how commensal influence on skin physiology and gene transcription paradoxically modulates PAH toxicity.
PDF
