The cross section of the process e+e−→K+K− is measured at a number of center-of-mass energies s from 2.00 to 3.08 GeV with the BESIII detector at the Beijing Electron Positron Collider (BEPCII). The ...results provide the best precision achieved so far. A resonant structure around 2.2 GeV is observed in the cross section line shape. A Breit-Wigner fit yields a mass of M=2239.2±7.1±11.3 MeV/c2 and a width of Γ=139.8±12.3±20.6 MeV, where the first uncertainties are statistical and the second ones are systematic. In addition, the timelike electromagnetic form factor of the kaon is determined at the individual center-of-mass energy points.
The process e+e- → Λ Λ ¯ is studied using data samples at √s = 2.2324, 2.400, 2.800 and 3.080 GeV collected with the BESIII detector operating at the BEPCII collider. The Born cross section is ...measured at √s=2.2324 GeV, which is 1.0 MeV above the Λ Λ ¯ mass threshold, to be 305±$45_{-36}^{+66}$ pb, where the first uncertainty is statistical and the second systematic. The substantial cross section near threshold is significantly larger than that expected from theory, which predicts the cross section to vanish at threshold. The Born cross sections at √s=2.400, 2.800 and 3.080 GeV are measured and found to be consistent with previous experimental results, but with improved precision. Finally, the corresponding effective electromagnetic form factors of Λ are deduced.
This is the second installment for the Large Sky Area Multi-Object Fibre Spectroscopic Telescope (LAMOST) Quasar Survey, which includes quasars observed from 2013 September to 2015 June. There are ...9024 confirmed quasars in DR2 and 10911 in DR3. After cross-match with the Sloan Digital Sky Survey (SDSS) quasar catalogs and NED, 12126 quasars are discovered independently. Among them, 2225 quasars were released by SDSS DR12 QSO catalog in 2014 after we finalized the survey candidates. 1801 sources were identified by SDSS DR14 as QSOs. The remaining 8100 quasars are considered as newly founded, and among them, 6887 quasars can be given reliable emission line measurements and the estimated black hole masses. Quasars found in LAMOST are mostly located at low-to-moderate redshifts, with a mean value of 1.5. The highest redshift observed in DR2 and DR3 is 5. We applied emission line measurements to H , Hβ, Mg ii, and C iv. We deduced the monochromatic continuum luminosities using photometry data, and estimated the virial black hole masses for the newly discovered quasars. Results are compiled into a quasar catalog, which will be available online.
We simulated elemental carbon (EC) and organic carbon (OC) aerosols in China and compared model results to surface measurements at Chinese rural and background sites, with the goal of deriving ..."top-down" emission estimates of EC and OC, as well as better quantifying the secondary sources of OC. We included in the model state-of-the-science Chinese "bottom-up" emission inventories for EC (1.92 TgC yr−1) and OC (3.95 TgC yr−1), as well as updated secondary OC formation pathways. The average simulated annual mean EC concentration at rural and background sites was 1.1 μgC m−3, 56% lower than the observed 2.5 μgC m−3. The average simulated annual mean OC concentration at rural and background sites was 3.4 μgC m−3, 76% lower than the observed 14 μgC m−3. Multiple regression to fit surface monthly mean EC observations at rural and background sites yielded the best estimate of Chinese EC source of 3.05 ± 0.78 TgC yr−1. Based on the top-down EC emission estimate and observed seasonal primary OC/EC ratios, we estimated Chinese OC emissions to be 6.67 ± 1.30 TgC yr−1. Using these top-down estimates, the simulated average annual mean EC concentration at rural and background sites was significantly improved to 1.9 μgC m−3. However, the model still significantly underestimated observed OC in all seasons (simulated average annual mean OC at rural and background sites was 5.4 μgC m−3), with little skill in capturing the spatiotemporal variability. Secondary formation accounts for 21% of Chinese annual mean surface OC in the model, with isoprene being the most important precursor. In summer, as high as 62% of the observed surface OC may be due to secondary formation in eastern China. Our analysis points to four shortcomings in the current bottom-up inventories of Chinese carbonaceous aerosols: (1) the anthropogenic source is underestimated on a national scale, particularly for OC; (2) the spatiotemporal distributions of emissions are misrepresented; (3) there is a missing source in western China, likely associated with the use of biofuels or other low-quality fuels for heating; and (4) sources in fall are not well represented, either because the seasonal shifting of emissions and/or secondary formation are poorly captured or because specific fall emission events are missing. In addition, secondary production of OC in China is severely underestimated. More regional measurements with better spatiotemporal coverage are needed to resolve these shortcomings.
The Tibetan Plateau is the highest and one of the most demanding environments ever inhabited by humans. We investigated the timing and mechanisms of its initial colonization at the Nwya Devu site, ...located nearly 4600 meters above sea level. This site, dating from 40,000 to 30,000 years ago, is the highest Paleolithic archaeological site yet identified globally. Nwya Devu has yielded an abundant blade tool assemblage, indicating hitherto-unknown capacities for the survival of modern humans who camped in this environment. This site deepens the history of the peopling of the "roof of the world" and the antiquity of human high-altitude occupations more generally.
Iron (Fe) is an essential element for plant growth and development. Fe deficiency can trigger leaf chlorosis and reduce fruit yield. Therefore, it is necessary to explore transcription factors in ...response to Fe deficiency stress.
A total of 29 MhR2R3‐MYB transcription factors were identified based on the transcriptome of Malus halliana under Fe deficiency stress. A comprehensive analysis of physical and chemical properties, gene structures, conserved motif composition, evolutionary relationship and chromosome distribution was performed. Subsequently, based on the transcriptome, 14 genes with the most significant expression under Fe deficiency stress were screened for qRT‐PCR verification. Among them,the functional characteristics of MhR2R3‐MYB4 (MD05G1089600) were further studied in Arabidopsis thaliana.
Expression of 13 out of these 14 genes was upregulated, only one was downregulated. Maximum upregulation of MhR2R3‐MYB4 under Fe deficiency was 36.39‐fold and 58.21‐fold compared with day 0 in leaves and roots, respectively. Overexpression of MhR2R3‐MYB4 enhanced tolerance to Fe deficiency in A. thaliana and led to multiple biochemical changes: transgenic lines have higher chl a, chl b and Fe2+ content, higher enzyme activity (SOD, POD, CAT and FCR) and lower chlorosis than the wild type in Fe deficiency conditions.
We suggest that MhR2R3‐MYB4 plays an important part in Fe deficiency stress, which may contribute to improve Fe deficiency tolerance of apple in future.
Based on the transcriptome of Malus halliana a total of 29 MhR2R3‐MYB transcription factors were identified, and overexpression of MhR2R3‐MYB4 improved tolerance to Fe deficiency stress in Arabidopsis thaliana.
Understanding how flowering phenology responds to warming and cooling (i.e., symmetric or asymmetric response) is needed to predict the response of flowering phenology to future climate change that ...will happen with the occurrence of warm and cold years superimposed upon a long-term trend. A three-year reciprocal translocation experiment was performed along an elevation gradient from 3200 m to 3800 m in the Tibetan Plateau for six alpine plants. Transplanting to lower elevation (warming) advanced the first flowering date (FFD) and transplanting to higher elevation (cooling) had the opposite effect. The FFD of early spring flowering plants (ESF) was four times less sensitive to warming than to cooling (by −2.1 d/°C and 8.4 d/°C, respectively), while midsummer flowering plants (MSF) were about twice as sensitive to warming than to cooling (−8.0 d/°C and 4.9 d/°C, respectively). Compared with pooled warming and cooling data, warming alone significantly underpredicted 3.1 d/°C for ESF and overestimated 1.7 d/°C for MSF. These results suggest that future empirical and experimental studies should consider nonlinear temperature responses that can cause such warming-cooling asymmetries as well as differing life strategies (ESF vs. MSF) among plant species.
We present experimental studies on ion acceleration using an 800-nm circularly polarized laser pulse with a peak intensity of 6.9×10^{19} W/cm^{2} interacting with an overdense plasma that is ...produced by a laser prepulse ionizing an initially ultrathin plastic foil. The proton spectra exhibit spectral peaks at energies up to 9 MeV with energy spreads of 30% and fluxes as high as 3×10^{12} protons/MeV/sr. Two-dimensional particle-in-cell simulations reveal that collisionless shocks are efficiently launched by circularly polarized lasers in exploded plasmas, resulting in the acceleration of quasimonoenergetic proton beams. Furthermore, this scheme predicts the generation of quasimonoenergetic proton beams with peak energies of approximately 150 MeV using current laser technology, representing a significant step toward applications such as proton therapy.
•MnCo2O4 nanowire array is prepared by a fast and facile hydrothermal method.•MnCo2O4 nanowire array exhibits noticeable pseudocapacitive properties.•The as-prepared nanowire array is also a ...promising material for Li-ion batteries.
One-dimension MnCo2O4 nanowire arrays are synthesized on nickel foam by a facile hydrothermal method. The MnCo2O4 nanowires are highly crystalline with an average diameter of 70nm and exhibit excellent properties for electrochemical energy storage. Impressively, the MnCo2O4 nanowire array exhibits noticeable pseudocapacitive performance with a high capacitance of 349.8 F g−1 at 1 A g−1 and 328.9 F g−1 at 20 A g−1 as well as excellent cycling stability. As an anode material for Li-ion batteries, the MnCo2O4 nanowire array delivers an initial specific discharge capacity of 1288.6 mAh g−1 at 100mAg−1, with reversible capacity retention of 92.7% after 50 cycles. The outstanding electrochemical performances are mainly attributed to its nanowire array architecture which provides large reaction surface area, fast ion and electron transfer and good structure stability.
PDF
