Cubic-phase Li7La3Zr2O12 (LLZO) garnet is a promising solid electrolyte candidate for next-generation Li batteries. As a viable approach, the desired cubic-phase formation of LLZO relies on elemental doping. In this regard, various dopants such as Al and Ga are doped into the LLZO samples, which are synthesized using a solid-state reaction method. The Al- and Ga-doped LLZO can transform to a cubic-phase garnet at 900 °C. After 1200 °C sintering, a Li2ZrO3 impurity phase is found for the Al-doped LLZO pellet, which still shows many voids and inhomogeneous particles on the surface. The Ga doping seems to be attractive since it can effectively stabilize the cubic phase and desired microstructure within 900–1200 °C. Based on the optimized Ga-doped LLZO (LGLZO), various electrolyte architecture designs are developed that include LGLZO pellet electrolytes with and without poly(ethylene oxide) (PEO)-lithium bis(trifluoromethylsulfonyl)imide (LiTFSI)-LGLZO coating, and hybrid electrolyte layers of PEO-LiTFSI, PEO-LGLZO, and PEO-LiTFSI-LGLZO composites. Li//LiFePO4 (LFP) cells with various types of electrolytes are assembled, and their charge-discharge properties are investigated. The all-solid-state Li//PEO-LiTFSI-LGLZO//LFP cell exhibits satisfactory charge storage performance, which has revealed potential for practical applications. Display omitted •Electrolyte architecture designs are developed using Ga-doped LLZO (LGLZO).•Electrolyte & interfacial resistances vary with PEO/LiTFSI/LGLZO ratio.•Optimal conductivity of PEO-LiTFSI-LGLZO is ∼3.3 × 10−4 S cm−1 at 65 °C.•All-solid-state Li//PEO-LiTFSI-LGLZO//LFP cell shows promising redox performance.