E-resources
Peer reviewed
Open access
-
de Oliveira Moraes, Diogo; Júnior, Petrônio Zumpano; Moraes e Oliveira, Victor Hugo Pereira; de Oliveira, Aline Capella; Filho, João da Cruz Payão
Journal of materials research and technology, 07/2022, Volume: 19Journal Article
Increasing the welding interpass temperature (IT) reduces the welding time and cost, particularly for offshore welding pipeline construction. However, it may degrade the mechanical properties of the welded joint; therefore, it is necessary to evaluate the effect of high IT on the heat-affected zone (HAZ). The influence of IT as high as 400 °C on the coarse-grained and intercritically reheated coarse-grained HAZs (CGHAZ and ICCGHAZ, respectively) of a Ni-based superalloy 625 (corrosion-resistant alloy UNS N06625) clad API 5 L X65 pipe was investigated. The joints were welded using a mechanized gas metal arc. The base metal (BM) and HAZ of the joints were evaluated using optical and scanning electron microscopy, as well as Vickers hardness, tensile strength, Charpy V-notch (CVN) at −30 °C, and crack tip opening displacement (CTOD) fracture toughness (−20 °C) testing. The CVN energy decreased as the IT increased from 300 to 400 °C owing to the formation of a large martensite-austenite-carbide (MAC) in the CGHAZ; however, all tests performed on joints welded at ITs up to 360 °C were considered acceptable based on DNVGL-ST-F101 requirements. The toughness results of the joint welded at an IT of 400 °C were not satisfactory, which indicates potential risks for the welding procedure qualification in this temperature range. Based on these findings, an increase in the IT up to 360 °C during gas metal arc welding (GMAW) using the adopted heat input is feasible. Moreover, this IT may be adopted for cost reduction because it decreases the total welding time by approximately 3 min per joint in the offshore welding of nickel-based superalloy 625 clad API 5 L X65 pipes.
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|
Source: Personal bibliographies
and: SICRIS
The material is available in full text. If you wish to order the material anyway, click the Continue button.