VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Effect of coating thickness on a solid-liquid two-phase flow centrifugal pump under water mediumLuo, Kaikai ...Spraying a coating on the surface of wet parts of a solid-liquid two-phase flow centrifugal pump could effectively increase its service life. To research the effect of coating thickness on the ... performance of the pump, a solid-liquid two-phase flow pump with a speed of ns = 81.5 was chosen, and polyurethane coatings with different thicknesses were sprayed on the surface of the blades of the impeller. The influence of coating thickness on the performance of the pump was tested under the condition of a water medium. Combined with numerical simulation, the internal flow, pressure fluctuations and radial force of the model pump were further analysed in detail. Keeping the blade outlet angle unchanged, the head and efficiency of the pump decrease with the increase of the coating thickness, and the amplitude of the decrease increases with the increase of the coating thickness. The peak value of pressure fluctuations increases with the increase of coating thickness. The pressure value on the impeller inlet increases first and then decreases with the increase of coating thickness. Radial force of impeller increases with the increase of coating thickness, and the radial force distributes in the triangle, which is the same as the number of blades.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 65, no. 4, Apr. 2019, str. 251-261, SI 32)Vrsta gradiva - članek, sestavni delLeto - 2019Jezik - angleškiCOBISS.SI-ID - 16618779
Avtor
Luo, Kaikai |
Wang, Yong, strojnik |
Liu, Houlin |
Dular, Matevž |
Chen, Jie, elektrotehnika |
Zhang, Zilong
Teme
coating thickness |
solid-liquid two-phase flow pumps |
numerical simulation |
pressure fluctuation |
radial force |
debelina prevleke |
dvofazne črpalke |
numerična simulacija |
nihanje tlaka |
radialna sila
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 65, no. 4, Apr. 2019, str. 251-261, SI 32)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Luo, Kaikai | |
Wang, Yong, strojnik | |
Liu, Houlin | |
Dular, Matevž | 23471 |
Chen, Jie, elektrotehnika | |
Zhang, Zilong |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: