VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Transient flow characteristics of a pressure differential valve with different valve spool damping orifice structuresZhang, XuLubrication system failure is a significant cause of in-flight shutdown incidents in aviation engines. The pressure differential valve, an essential component of a certain type of aviation engine ... lubrication system, is responsible for controlling the flow rate and pressure of the lubricating oil. Comprehending the transient flow characteristics of the pressure differential valve is of paramount importance for the secure operation of lubrication systems. This paper establishes a transient flow model of a pressure differential valve based on a transient computational fluid dynamics (CFD) method, and the experimental validation demonstrates the effectiveness of the computational model. The internal flow characteristics of the differential pressure valve at different stages during the opening process were studied. Additionally, four transient lubricating oil flow models with different valve spool damping orifice were established to analyse the impact of damping orifice structure on valve spool movement characteristics, pressure control characteristics, and flow field distribution. The results indicate that when the diameter of the valve spool damping orifice increases from 0.3 mm to 1.0 mm, the valve spool displacement and fluid force increase by 88 % and 20 %, respectively. Meanwhile, the peak valve spool velocity, peak oil supply pressure, and steady-state value decreased by 15 %, 29 %, and 34 %, respectively. As the length of the valve spool damping orifice increases from 0.894 mm to 4.0 mm, the growth rate of valve spool displacement and fluid force gradually decreases, with the peak valve spool velocity decreasing by 7 %. This study has potential significance for the structural optimization and application of pressure differential valve in lubrication systems.Vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 70, no. 3/4, Mar.-Apr. 2024, str. 141-158)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 192475139
vir: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 70, no. 3/4, Mar.-Apr. 2024, str. 141-158)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Zhang, Xu |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: