-
Extraction of uniaxial stress–strain curve from bending test using DIC measurementsObid, Štefan ...This paper presents a novel methodology for the analytical determination of the uniaxial tensile/compressive stress–strain curve derived from the four-point bending test without a pre-assumed ... constitutive model. While the concept of extracting the stress–strain curve from a bending test is not new, the proposed methodology differs from existing methods by recognising the force equilibrium in a deformed configuration, resulting in a temporal variation of both a bending moment and an axial force. In addition, the deformation of the beam cross-section is taken into account according to the principles of finite strain theory either via Poisson’s ratio or by assuming volume conservation. The crucial data for this methodology are obtained from an experimentally conducted bending test in which the loading force, displacement and strain fields at the top, bottom and front faces of the specimen are measured using a stereo DIC. While the method is completely analytical, it reconstructs the stress–strain curve in discrete form by solving a system of linear equations. While the existing methods for the four-point bending test allow extraction of the stress–strain curve from a single experiment only for strains up to a few per cent, our methodology allows the extraction of the stress–strain curve in tension and compression up to five times the strains obtained with methods that neglect the above features.Vir: European journal of mechanics. A, Solids. - ISSN 0997-7538 (Vol. 106, [article no.] 105346, Jul.–Aug. 2024, str. 1-15)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 196922883
Avtor
Obid, Štefan |
Starman, Bojan, 1985- |
Urevc, Janez, 1983- |
Halilovič, Miroslav
Teme
four-point bending test |
stress–strain curve |
tension–compression asymmetry |
digital image correlation |
finite strains |
material testing |
štiri-točkovni upogibni preizkus |
sigma-epsilon diagram |
natezno-tlačna asimetrija |
korelacija digitalnih slik |
velike deformacije |
materialno testiranje
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Obid, Štefan | 53812 |
Starman, Bojan, 1985- | 33274 |
Urevc, Janez, 1983- | 33473 |
Halilovič, Miroslav | 20443 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.