The historical building heritage, present in the most of Italian cities centres, is, as part of the construction sector, a working potential, but unfortunately it requires planning of more complex ...and problematic interventions. However, policies to support on the existing interventions, together with a growing sensitivity for the recovery of assets, determine the need to implement specific studies and to analyse the specific problems of each site. The purpose of this paper is to illustrate the methodology and the results obtained from integrated laser scanning activity in order to have precious architectural information useful not only from the cultural heritage point of view but also to construct more operative and powerful tools, such as BIM (Building Information Modelling) aimed to the management of this cultural heritage. The Papal Basilica and the Sacred Convent of Saint Francis in Assisi in Italy are, in fact, characterized by unique and complex peculiarities, which require a detailed knowledge of the sites themselves to ensure visitor’s security and safety. For such a project, we have to take in account all the people and personnel normally present in the site, visitors with disabilities and finally the needs for cultural heritage preservation and protection. This aim can be reached using integrated systems and new technologies, such as Internet of Everything (IoE), capable of connecting people, things (smart sensors, devices and actuators; mobile terminals; wearable devices; etc.), data/information/knowledge and processes to reach the desired goals. The IoE system must implement and support an Integrated Multidisciplinary Model for Security and Safety Management (IMMSSM) for the specific context, using a multidisciplinary approach.
Historical maps represent an important source of geographical information. The changes occurred over time can be extrapolated from them, especially if their geometric accuracies match those ...achievable with modern survey techniques. An 1820 map belonging to the Gregorian Cadastre provides the position of seven hermitages belonging to the monastery of Fara in Sabina (Italy). Just three of them are nowadays visible, while the others may have been covered by thick vegetation or been destroyed during the Second World War. The paper proposes the integration of geomatic techniques for the localization of the lost hermitages. To do so, Structure from Motion (SfM) algorithms were applied to UAV imagery to produce an orthophoto of the area. In addition, a GNSS survey was carried out using a professional and a low-cost receiver to correctly georeference the photogrammetric products. An accuracy assessment was then performed to evaluate the performance of the u-blox board in real applications. The accuracies obtained with the low-cost receiver indicates a possible more widespread utilization of these new devices. Subsequently, the comparison between the orthophoto and the cadastral map have been detailed. A weak correspondence between the position of the hermitages in the two maps have been observed. On the other side, the comparison led to the localization of two lost hermitages, with the other two being still undiscovered. This study has opened the door to an enhancement process of the monastery and to the rediscovery of the religious values of the hermitages.
The need to make electricity production increasingly sustainable requires careful planning of production plants, mainly for wind and photovoltaic energy conversion. Planning areas correctly, while ...respecting existing environmental constraints, is not an easy task and requires the collaboration of a panel of experts with different skills. The need to search for new sites to be allocated to renewable energy generation plants is demanded by the most pressing current events: it’s just in such a context that the Italian national legislation is undergoing a revision, which has entrusted the regional administrations with the task of identifying the territorial criteria. By simulations in GIS environments, it’s possible to study the effect of defining certain criteria on the territory, in order to assess in advance which and how many areas could have greater or lesser suitability. Based on this consideration, we proceeded to experiment with the effects of the most common constraints by developing a real simulation on the territory of the Lazio Region. The experimentation used the well-known open environment QGIS 3.22, which made it possible to exploit the possibilities offered by the open territorial databases of the Lazio Region. The first results show that the remaining areas after eliminating all those that are certainly unsuitable are a limited part of the Region itself. The analysis was extended to individual municipalities by comparing average yields per conceivable plant area, then comparing them with inhabitants for an initial estimate of energy needs at least for domestic use.
The survey of ancient cave can generally be performed by traditional topographic methods that allow also its georeferencing in a global reference frame; some difficulties may arise when there are ...narrow tunnels that do not consent the use of a total station or a terrestrial laser scanner. In such cases a visual-based approach can be used to produce, both the followed path and the 3D model of the hypogeal environment. A prompt photogrammetric survey has been used to reconstruct the morphology of the La Sassa Cave, situated in the municipality of Sonnino (Latina), in the lower Lazio region. In this cave, a very large quantity of Pleistocene animal bones was found, together with several fragments of Copper Age human bones and Bronze Age impasto potsherds. The survey was carried out using a DSLR full frame camera Nikon D800E with a Nikkor 16 mm fisheye lens pre-calibrated. During the acquisition, several targets were measured in order to contain the deformations model. The photogrammetric model has been georeferenced using 3 GCPs positioned outside the cave entrance where a double frequency GNSS receiver has acquired data in static session mode.
A PROMPT METHODOLOGY TO GEOREFERENCE COMPLEX HYPOGEA ENVIRONMENTS Troisi, S.; Baiocchi, V.; Del Pizzo, S. ...
International archives of the photogrammetry, remote sensing and spatial information sciences.,
02/2017, Letnik:
XLII-2/W3
Journal Article, Conference Proceeding
Recenzirano
Odprti dostop
Actually complex underground structures and facilities occupy a wide space in our cities, most of them are often unsurveyed; cable duct, drainage system are not exception. Furthermore, several ...inspection operations are performed in critical air condition, that do not allow or make more difficult a conventional survey. In this scenario a prompt methodology to survey and georeferencing such facilities is often indispensable. A visual based approach was proposed in this paper; such methodology provides a 3D model of the environment and the path followed by the camera using the conventional photogrammetric/Structure from motion software tools. The key-role is played by the lens camera; indeed, a fisheye system was employed to obtain a very wide field of view (FOV) and therefore high overlapping among the frames. The camera geometry is in according to a forward motion along the axis camera. Consequently, to avoid instability of bundle adjustment algorithm a preliminary calibration of camera was carried out. A specific case study was reported and the accuracy achieved.
The shallow landslides constitute a consistent current hazard that could increase in the future, especially in the Mediterranean areas. Regional scale hazard maps involving runout estimation are not ...yet particularly widespread. The study was conducted with the aim of testing a debris flows risk assessment process starting from the runout analysis of a debris flows dataset triggered by the event of October 1, 2009.Preliminary results highlight how the procedure permit to produce a runout hazard assessment in the valley areas where the more important and vulnerable exposed elements are situated. Despite the obvious limitations, the process appears particularly useful to address the public administration demand for simple tools to manage and direct regional planning.
Abstract
The greatest part of the documents concerning the last reclamation scheme of the Pontine Plain is now stored in a section of the state archive and in the archive of the Consorzio di Bonifica ...dell’Agro Pontino, both located in Latina (Italy). Detailed plans of the realised buildings, infrastructures as well as thousands of pictures of the environments before the reclamation scheme are available to the public. These data can be used to reconstruct the ancient landscape before the major changes which occurred after the spread of mechanical vehicles for earthmoving in the 1970s. The reconstruction maps can be used to set the proper background for the archaeological research in the area.
Historical cartography is an important source of geographic information for diachronic studies. The Italian geodetic datum from the second half of the 20th century are well known and used, while the ...reference systems used previously do not have a certain documentation also because they were developed by the military geographical institute, which at the time was a uniquely military body with the related problems of confidentiality.The reconstruction of the datum of each single historical map is a fundamental process, in order to be able to correctly compare historical information with the current ones, but it is complex because of the scarce information available on the type of datum and cartographic projection used for the production of the map.The reconstruction of the ancient morphology of an area, such as that of 1893 Forma urbis map or the pre-reclamation maps of Agro Pontino, is of fundamental importance for various studies on geomorphological changes of the territory, including, for example, the reconstruction of diverted and/or covered watercourses.Many of the Italian historical maps have been referred to the ellipsoid of Bessel with different orientations that in many cases are the same used previously or simultaneously for public purposes including, in particular, the drafting of the cadastral cartography.
In Europe and beyond, the cultural and archaeological heritage may have considerable extensions of hundreds of square metres if not kilometres. It is then necessary to study highly efficient ...techniques able , at the same time, to maintain centimetric accuracy. In these contexts, the SLAM technique can be an efficient solution. We tested the latter in a survey of a portion of the so-called Roman Villa of Caposele, also known as Villa Rubino in Formia, (Italy): the “Ninfeo Maggiore” and “Ninfeo Minore” (Major and Minor nymphaeum). The two structures had to be surveyed for both conservation and study purposes and to allow a virtual visit, which is particularly important since they are located inside a private property. The structure is complex, with a succession of rooms and environments in an archaeological complex extending approximately 480 metres in an east-west direction and approximately 50 metres in a south-north direction. We decided to survey both nymphaea with the “GEOSLAM Zeb Horizon”, also surveying all the internal connecting rooms and corridors between them. Both nymphaea were also surveyed with a “Faro” terrestrial laser scanning, to allow comparison. To verify the validity of the SLAM on the outside, a survey was carried out using a DJI Matrix drone with laser scanning. The comparison showed very limited deviations whose statistical validation is in progress, demonstrating that the SLAM technique can advantageously be used in such vast archaeological complexes where the efficiency and completeness of the survey is more important than the millimetric accuracy.
PDF
