We report the first search for a non-standard-model resonance decaying into $\tau$ pairs in $e^{+}e^{-}\rightarrow \mu^{+}\mu^{-} \tau^+\tau^-$ events in the 3.6-10 GeV/$c^{2}$ mass range. We use a ...62.8 fb$^{-1}$ sample of $e^+e^-$ collisions collected at a center-of-mass energy of 10.58 GeV by the Belle II experiment at the SuperKEKB collider. The analysis probes three different models predicting a spin-1 particle coupling only to the heavier lepton families, a Higgs-like spin-0 particle that couples preferentially to charged leptons (leptophilic scalar), and an axion-like particle, respectively. We observe no evidence for a signal and set exclusion limits at 90% confidence level on the product of cross section and branching fraction into $\tau$ pairs, ranging from 0.7 fb to 24 fb, and on the couplings of these processes. We obtain world-leading constraints on the couplings for the leptophilic scalar model for masses above 6.5 GeV/$c^2$ and for the axion-like particle model over the entire mass range.
The $L_{\mu}-L_{\tau}$ extension of the standard model predicts the existence of a lepton-flavor-universality-violating $Z^{\prime}$ boson that couples only to the heavier lepton families. We search ...for such a $Z^\prime$ through its invisible decay in the process $e^+ e^- \to \mu^+ \mu^- Z^{\prime}$. We use a sample of electron-positron collisions at a center-of-mass energy of 10.58GeV collected by the Belle II experiment in 2019-2020, corresponding to an integrated luminosity of 79.7fb$^{-1}$. We find no excess over the expected standard-model background. We set 90$\%$-confidence-level upper limits on the cross section for this process as well as on the coupling of the model, which ranges from $3 \times 10^{-3}$ at low $Z^{\prime}$ masses to 1 at $Z^{\prime}$ masses of 8$GeV/c^{2}$.
We study the processes $e^+e^-\to\omega\chi_{bJ}(1P)$ ($J$ = 0, 1, or 2) using samples at center-of-mass energies $\sqrt{s}$ = 10.701, 10.745, and 10.805 GeV, corresponding to 1.6, 9.8, and 4.7 ...fb$^{-1}$ of integrated luminosity, respectively. These data were collected with the Belle II detector during special operations of the SuperKEKB collider above the $\Upsilon(4S)$ resonance. We report the first observation of $\omega\chi_{bJ}(1P)$ signals at $\sqrt{s}$ = 10.745 GeV. By combining Belle II data with Belle results at $\sqrt{s}$ = 10.867 GeV, we find energy dependencies of the Born cross sections for $e^+e^-\to \omega\chi_{b1,b2}(1P)$ to be consistent with the shape of the $\Upsilon(10753)$ state. These data indicate that the internal structures of the $\Upsilon(10753)$ and $\Upsilon(10860)$ states may differ. Including data at $\sqrt{s}$ = 10.653 GeV, we also search for the bottomonium equivalent of the $X(3872)$ state decaying into $\omega\Upsilon(1S)$. No significant signal is observed for masses between 10.45 and 10.65 GeV/$c^2$.
The Belle II silicon vertex detector: Assembly and initial results Thalmeier, R.; Casarosa, G.; Schwanda, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2019, Letnik:
936
Journal Article
Recenzirano
Odprti dostop
The “chip-on-sensor” concept of this detector minimizes the distance of the signal propagation from the double-sided silicon detector strips to the readout chips and thus reduces noise from strip ...capacitance. One half of the detector is built, the second half is being assembled at the time of writing. Prototypes have been tested in several test beams as well as in the so-called Phase 2 setup inside the detector structure. First results from a commissioning run of the Belle-II prototype SVD detector are presented. The measured signal-to-noise and timing performance are found to be according to design specifications.
•The Belle-II Silicon Vertex Detector is based on a “chip-on-sensor” concept.•One half of the detector is built, the second half is being assembled.•Prototypes have been tested in a commissioning run inside the detector structure.•The measured SNR and hit time are found to be according to design specifications.
Run and slow control system of the Belle II silicon vertex detector Irmler, C.; Aihara, H.; Aziz, T. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2020, Letnik:
958
Journal Article
Recenzirano
Odprti dostop
The Belle II Silicon Vertex Detector (SVD) was installed recently and has been prepared for physics run at SuperKEKB factory, Tsukuba, Japan. For a reliable operation and data taking of the SVD, a ...sophisticated and robust run and slow control system has been implemented, which utilizes the Experimental Physics and Industrial Control System (EPICS) framework. EPICS uses client/server and publish/subscribe techniques to communicate between the various sub-systems and computers. The information exchange between the different pieces of software and computers is done by process variables (PVs). These PVs are provided by input/output controllers (IOCs), which communicate and interface with the hardware components. The Belle II SVD slow and run control comprises five groups of subsystems, which are SVD DAQ controller, Flash ADC controller, environmental monitors and interlocks, power supplies and EPICS infrastructure services. In this paper we describe the tasks and the implementation of the individual sub-systems, the interaction between them and the global Belle II run and slow control as well as the first experience from commissioning and initial operation of the SuperKEKB accelerator.
This paper shows the hardware and the procedure utilized to test all components of the readout system (cables, FADC boards, junction boards) of the Belle II Silicon Vertex Detector after the series ...production. For the FADC board special testing hardware and firmware were designed and created to check all digital and analog inputs and outputs as well as all data interconnections on the board. The main FPGA on the FADC board generates digital signals which are converted to periodic analog differential alternating voltages up to 40 MHz on the FADC board tester, which then are fed into the analog inputs of the FADC board. Histograms and scans of the samples are recorded by using random equivalent-time sampling or sequential equivalent-time sampling, allowing to characterize the behavior of the system with a much higher bandwidth than the ADCs could do with conventional measurements. Small changes of parameters of the assembly (like using a cable of different length) lead to significant changes of the measured values, creating a sensitive testing instrument. The shapes of the distributions are analyzed and compared to references by software which then decides if a test is passed or not.
The commissioning setup of the whole readout chain, with all the final components including the final detector, has been tested in three phases. The respective graphs of the signal-to-noise ratios of the strips of a detector module and histograms of the noise development of the whole detector show very high consistency of the SVD readout system.
Commissioning of the Belle II Silicon Vertex Detector Casarosa, G.; Aihara, H.; Aziz, T. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2020, Letnik:
958
Journal Article
Recenzirano
Odprti dostop
The Belle II experiment at the SuperKEKB collider of KEK (Japan) will accumulate 50 ab−1 of e+e- collision data at an unprecedented instantaneous luminosity of 8⋅ 1035 cm−2s−1, about 40 times larger ...than its predecessor. The Belle II vertex detector plays a crucial role in the rich Belle II physics program, especially for time-dependent measurements. It consists of two layers of DEPFET-based pixels and four layers of double sided silicon strip sensors (SVD detector). We report here results of the standalone commissioning of the SVD and highlights from the first cosmic runs acquired in Belle II. We also report on reconstruction performances of a reduced-scale version of the SVD operated during the accelerator commissioning in 2018.
We measure the tau-to-light-lepton ratio of inclusive B-meson branching fractions R(X_{τ/ℓ})≡B(B→Xτν)/B(B→Xℓν), where ℓ indicates an electron or muon, and thereby test the universality of ...charged-current weak interactions. We select events that have one fully reconstructed B meson and a charged lepton candidate from 189 fb^{-1} of electron-positron collision data collected with the Belle II detector. We find R(X_{τ/ℓ})=0.228±0.016(stat)±0.036(syst), in agreement with standard-model expectations. This is the first direct measurement of R(X_{τ/ℓ}).
PDF