Belle II is a new-generation B-factory experiment, dedicated to exploring new physics beyond the standard model of elementary particles in the flavor sector. Belle II started data-taking in April ...2018, using a synchronous data acquisition (DAQ) system based on pipelined trigger flow control. The Belle II DAQ system is designed to handle a 30-kHz trigger rate with approximately 1% of dead time, under the assumption of a raw event size of 1 MB. The DAQ system is reliable, and the overall data-taking efficiency reached 84.2% during the run period of January 2020-June 2020. The current readout system cannot be operated in the terms of ten years from the viewpoint of DAQ maintainability; meanwhile, the readout system is obstructing high-speed data transmission. A solution involving a peripheral component interconnect (PCI)-express-based readout module with high data throughput of up to 100 Gb/s was adopted to upgrade the Belle II DAQ system. We particularly focused on the design of firmware and software based on this new generation of readout board, called PCIe40, with an Altera Arria 10 field-programmable gate array chip. The 48-Gb transceiver (GBT) serial links, PCI-express hard IP-based direct memory access (DMA) architecture, interface of timing and trigger distribution system, and slow control system were designed to integrate with the current Belle II DAQ system. This article describes the performances accomplished during the data readout and slow control tests conducted using a test bench and a demonstration performed using on-site front-end electronics, specifically involving Belle II TOP and KLM subdetectors.
The Belle II experiment and the SuperKEKB collider are designed to operate under a higher luminosity compared to that of Belle for the improvement of rare <inline-formula> <tex-math ...notation="LaTeX">B </tex-math></inline-formula> meson decay study and new physics search. To break the bottleneck of bandwidth and to improve the stability in the operation of the Belle II data acquisition (DAQ) system, a new PCI-express-based readout system has been developed. The new system includes a PCI-express-based high-speed readout board (PCIe40), which was originally developed for the upgrades of the LHCb and ALICE experiments, the PCIe40 firmware, the slow control, and readout software running on a readout PC. The new readout system's commissioning with most of the Belle II subdetectors has been performed, and the readout upgrade is complete for the particle-identification detectors and the neutral kaon and muon detector in Belle II, which has been operating stably with the new system in the beam collision "physics runs." The results of the commissioning and the performance of the global DAQ operation will be reported.
The front-end electronics system for the Belle II Time-Of-Propagation (TOP) counter was fully installed in May 2016. The detector is a novel particle identification device for the barrel region, ...where Cherenkov ring images are reconstructed with precise timing information of each photon. The readout electronics need to have excellent timing performance for single photon detection. To exploit the benefit of high luminosity, the electronics must also be able to cope with a high input trigger rate (30 kHz) and have buffer memory which is deep enough to wait for a trigger decision (>5 μs). The TOP electronics has switching capacitor arrays to sample waveforms with 2.7 GSample/s, which allows a timing resolution of 50 ps for a single photon signal. The programmable logic and the processing system are the effective implementation to meet these requirements, where flexible optimization and step-by-step development of readout logic are possible. The system has been successfully operated in the first accelerator commissioning runs with beam collisions in 2018, where the typical trigger rate was 500Hz. Operation with a 20 kHz trigger rate was also tested.
•Readout electronics for the Belle II Time-Of-Propagation counter was installed.•A single photon is detected with timing resolution better than 100 ps.•The whole system was successfully operated in the physics run.
We present a search for the direct production of a light pseudoscalar a decaying into two photons with the Belle II detector at the SuperKEKB collider. We search for the process e+e−→γa, a→γγ in the ...mass range 0.2<ma<9.7 GeV/c2 using data corresponding to an integrated luminosity of (445±3) pb−1. Light pseudoscalars interacting predominantly with standard model gauge bosons (so-called axionlike particles or ALPs) are frequently postulated in extensions of the standard model. We find no evidence for ALPs and set 95% confidence level upper limits on the coupling strength gaγγ of ALPs to photons at the level of 10−3 GeV−1. The limits are the most restrictive to date for 0.2<ma<1 GeV/c2.
Theories beyond the standard model often predict the existence of an additional neutral boson, the Z^{'}. Using data collected by the Belle II experiment during 2018 at the SuperKEKB collider, we ...perform the first searches for the invisible decay of a Z^{'} in the process e^{+}e^{-}→μ^{+}μ^{-}Z^{'} and of a lepton-flavor-violating Z^{'} in e^{+}e^{-}→e^{±}μ^{∓}Z^{'}. We do not find any excess of events and set 90% credibility level upper limits on the cross sections of these processes. We translate the former, in the framework of an L_{μ}-L_{τ} theory, into upper limits on the Z^{'} coupling constant at the level of 5×10^{-2}-1 for M_{Z^{'}}≤6 GeV/c^{2}.
We present measurements of partial branching fractions of inclusive semileptonic B → Xuℓ+ νℓ decays using the full Belle dataset of 711 fb−1 of integrated luminosity at the Υ(4S) resonance and for ℓ ...= e, μ. Inclusive semileptonic B → Xuℓ+ νℓ decays are Cabibbo-Kobayashi-Maskawa (CKM) suppressed and measurements are complicated by the large background from CKM favored B → Xcℓ+ νℓ transitions, which have a similar signature. Using machine learning techniques, we reduce this and other backgrounds effectively, while retaining access to a large fraction of the B → Xuℓ+νℓ phase space and high signal efficiency. We measure partial branching fractions in three phase-space regions covering about 31% to 86% of the accessible B → Xuℓ+νℓ phase space. The most inclusive measurement corresponds to the phase space with lepton energies of EBℓ > 1 GeV, and we obtain ΔB ( B → Xuℓ+νℓ) = (1.59 ± 0.07 ± 0.16) × 10−3 from a two-dimensional fit of the hadronic mass spectrum and the four-momentum-transfer squared distribution, with the uncertainties denoting the statistical and systematic error. We find |Vub| = (4.10 ± 0.09 ± 0.22 ± 0.15) × 10−3 from an average of four calculations for the partial decay rate with the third uncertainty denoting the average theory error. This value is higher but compatible with the determination from exclusive semileptonic decays within 1.3 standard deviations. In addition, we report charmless inclusive partial branching fractions separately for B + and B 0 mesons as well as for electron and muon final states. No isospin breaking or lepton flavor universality violating effects are observed.
B-flavor tagging at Belle II Akopov, N.; Banerjee, Sw; Bauer, M. ...
The European physical journal. C, Particles and fields,
04/2022, Letnik:
82, Številka:
4
Journal Article
Recenzirano
Odprti dostop
We report on new flavor tagging algorithms developed to determine the quark-flavor content of bottom (
) mesons at Belle II. The algorithms provide essential inputs for measurements of quark-flavor ...mixing and charge-parity violation. We validate and evaluate the performance of the algorithms using hadronic
decays with flavor-specific final states reconstructed in a data set corresponding to an integrated luminosity of 62.8 fb
-
1
, collected at the
resonance with the Belle II detector at the SuperKEKB collider. We measure the total effective tagging efficiency to be
ε
eff
=
(
30.0
±
1.2
(
stat
)
±
0.4
(
syst
)
)
%
for a category-based algorithm and
ε
eff
=
(
28.8
±
1.2
(
stat
)
±
0.4
(
syst
)
)
%
for a deep-learning-based algorithm.
PDF
