Ever growing populations in cities are associated with a major increase in road vehicles and air pollution. The overall high levels of urban air pollution have been shown to be of a significant risk ...to city dwellers. However, the impacts of very high but temporally and spatially restricted pollution, and thus exposure, are still poorly understood. Conventional approaches to air quality monitoring are based on networks of static and sparse measurement stations. However, these are prohibitively expensive to capture tempo-spatial heterogeneity and identify pollution hotspots, which is required for the development of robust real-time strategies for exposure control. Current progress in developing low-cost micro-scale sensing technology is radically changing the conventional approach to allow real-time information in a capillary form. But the question remains whether there is value in the less accurate data they generate. This article illustrates the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, while addressing the major challenges for their effective implementation.
Display omitted
•Impacts on the health of city dwellers due to high air pollution exposure are unknown.•Conventional sparse monitoring stations are unable to identify pollution hotspots.•Low-cost micro-scale sensing allows capturing real-time high-grained pollution data.•Fundamental drivers behind the rise of low-cost sensing and challenges are discussed.
This study investigates the concentration, cloud condensation nuclei (CCN) activity and hygroscopic properties of particles influenced by biomass burning in the eastern Mediterranean and their ...impacts on cloud droplet formation. Air masses sampled were subject to a range of atmospheric processing (several hours up to 3 days). Values of the hygroscopicity parameter, κ, were derived from CCN measurements and a Hygroscopic Tandem Differential Mobility Analyzer (HTDMA). An Aerosol Chemical Speciation Monitor (ACSM) was also used to determine the chemical composition and mass concentration of non-refractory components of the submicron aerosol fraction. During fire events, the increased organic content (and lower inorganic fraction) of the aerosol decreases the values of κ, for all particle sizes. Particle sizes smaller than 80 nm exhibited considerable chemical dispersion (where hygroscopicity varied up to 100 % for particles of same size); larger particles, however, exhibited considerably less dispersion owing to the effects of condensational growth and cloud processing. ACSM measurements indicate that the bulk composition reflects the hygroscopicity and chemical nature of the largest particles (having a diameter of ∼ 100 nm at dry conditions) sampled. Based on positive matrix factorization (PMF) analysis of the organic ACSM spectra, CCN concentrations follow a similar trend as the biomass-burning organic aerosol (BBOA) component, with the former being enhanced between 65 and 150 % (for supersaturations ranging between 0.2 and 0.7 %) with the arrival of the smoke plumes. Using multilinear regression of the PMF factors (BBOA, OOA-BB and OOA) and the observed hygroscopicity parameter, the inferred hygroscopicity of the oxygenated organic aerosol components is determined. We find that the transformation of freshly emitted biomass burning (BBOA) to more oxidized organic aerosol (OOA-BB) can result in a 2-fold increase of the inferred organic hygroscopicity; about 10 % of the total aerosol hygroscopicity is related to the two biomass-burning components (BBOA and OOA-BB), which in turn contribute almost 35 % to the fine-particle organic water of the aerosol. Observation-derived calculations of the cloud droplet concentrations that develop for typical boundary layer cloud conditions suggest that biomass burning increases droplet number, on average by 8.5 %. The strongly sublinear response of clouds to biomass-burning (BB) influences is a result of strong competition of CCN for water vapor, which results in very low maximum supersaturation (0.08 % on average). Attributing droplet number variations to the total aerosol number and the chemical composition variations shows that the importance of chemical composition increases with distance, contributing up to 25 % of the total droplet variability. Therefore, although BB may strongly elevate CCN numbers, the impact on droplet number is limited by water vapor availability and depends on the aerosol particle concentration levels associated with the background.
In this review paper, we provide an overview of state-of-the-art Pd-based materials for optical H2 sensors. The first part of the manuscript introduces the operating principles, providing background ...information on the thermodynamics and the primary mechanisms of optical detection. Optical H2 sensors using thin films (i.e., films without any nanostructuring) are discussed first, followed by those employing nanostructured materials based on aggregated or isolated nanoparticles (ANPs and INPs, respectively), as well as complex nanostructured (CN) architectures. The different material types are discussed on the basis of the properties they can attribute to the resulting sensors, including their limit of detection, sensitivity, and response time. Limitations induced by cracking and the hysteresis effect, which reduce the repeatability and reliability of the sensors, as well as by CO poisoning that deteriorates their performance in the long run, are also discussed together with an overview of manufacturing approaches (e.g., tailoring the composition and/or applying functionalizing coatings) for addressing these issues.
Previous long‐term observations have shown that nanoparticle formation events are common in the summer‐time high Arctic and linked to local photochemical activity. However, current knowledge is ...limited with respect to the chemical precursors of resulting nanoparticles and the compounds involved in their subsequent growth. Here we report case‐study measurements during new particle formation (NPF) events of the particle size distribution (diameter > 7 nm) and for the first time the volatility of monodisperse particles having diameter ≤40 nm, providing indirect information about their composition. Volatility measurements provide indirect evidence that a predominant fraction of the 12 nm particle population is ammoniated sulfates in the summertime high Arctic. Our observations further suggest that the majority of the sub‐40 nm particle population during NPF events does not exist in the form of sulfuric acid but rather as partly or fully neutralized ammoniated sulfates.
Key Points
Volatility measurements of monodisperse nanoparticles in the high Arctic
Compounds involved in particle growth during nucleation are indirectly identified
Findings show that 12 nm particles mainly consist of ammoniated sulfates
Among the numerous point vapor sources, microsecond-pulsed spark ablation at atmospheric pressure is a versatile and environmentally friendly method for producing ultrapure inorganic nanoparticles ...ranging from singlets having sizes smaller than 1 nm to larger agglomerated structures. Due to its fast quenching and extremely high supersaturation, coagulational growth already begins at the atomic scale at room temperature. On the basis of this knowledge, we develop a simple semiempirical yet versatile model for predicting the size distribution of singlet particles as a function of the process conditions. The model assumes that a plume of a turbulent aerosol flow flares out from a concentrated point source, eventually reaching the walls of the confinement where a fraction of the particles is deposited. Despite the complexity of the entire process, the concentration and size evolution of particles can be adequately described by a first-order differential equation accounting for coagulation, turbulent dilution, and diffusional deposition to the walls. The model provides a simple and practical tool that can generally be used to design and control point vapor source reactors for the synthesis of singlets with tunable sizes starting from that of single atoms.
The conversion of light to electrical and chemical energy has the potential to provide meaningful advances to many aspects of daily life, including the production of energy, water purification, and ...optical sensing. Recently, plasmonic nanoparticles (PNPs) have been increasingly used in artificial photosynthesis (e.g., water splitting) devices in order to extend the visible light utilization of semiconductors to light energies below their band gap. These nanoparticles absorb light and produce hot electrons and holes that can drive artificial photosynthesis reactions. For n-type semiconductor photoanodes decorated with PNPs, hot charge carriers are separated by a process called hot electron injection (HEI), where hot electrons with sufficient energy are transferred to the conduction band of the semiconductor. An important parameter that affects the HEI efficiency is the nanoparticle composition, since the hot electron energy is sensitive to the electronic band structure of the metal. Alloy PNPs are of particular importance for semiconductor/PNPs composites, because by changing the alloy composition their absorption spectra can be tuned to accurately extend the light absorption of the semiconductor. This work experimentally compares the HEI efficiency from Ag, Au, and Ag/Au alloy nanoparticles to TiO2 photoanodes for the photoproduction of hydrogen. Alloy PNPs not only exhibit tunable absorption but can also improve the stability and electronic and catalytic properties of the pure metal PNPs. In this work, we find that the Ag/Au alloy PNPs extend the stability of Ag in water to larger applied potentials while, at the same time, increasing the interband threshold energy of Au. This increasing of the interband energy of Au suppresses the visible-light-induced interband excitations, favoring intraband excitations that result in higher hot electron energies and HEI efficiencies.
Acute phase response (APR) is characterized by a change in concentration of different proteins, including C-reactive protein and serum amyloid A (SAA) that can be linked to both exposure to metal ...oxide nanomaterials and risk of cardiovascular diseases. In this study, we intratracheally exposed mice to ZnO, CuO, Al
O
, SnO
and TiO
and carbon black (Printex 90) nanomaterials with a wide range in phagolysosomal solubility. We subsequently assessed neutrophil numbers, protein and lactate dehydrogenase activity in bronchoalveolar lavage fluid, Saa3 and Saa1 mRNA levels in lung and liver tissue, respectively, and SAA3 and SAA1/2 in plasma. Endpoints were analyzed 1 and 28 days after exposure, including histopathology of lung and liver tissues.
All nanomaterials induced pulmonary inflammation after 1 day, and exposure to ZnO, CuO, SnO
, TiO
and Printex 90 increased Saa3 mRNA levels in lungs and Saa1 mRNA levels in liver. Additionally, CuO, SnO
, TiO
and Printex 90 increased plasma levels of SAA3 and SAA1/2. Acute phase response was predicted by deposited surface area for insoluble metal oxides, 1 and 28 days post-exposure.
Soluble and insoluble metal oxides induced dose-dependent APR with different time dependency. Neutrophil influx, Saa3 mRNA levels in lung tissue and plasma SAA3 levels correlated across all studied nanomaterials, suggesting that these endpoints can be used as biomarkers of acute phase response and cardiovascular disease risk following exposure to soluble and insoluble particles.
In situ measurements using unmanned aerial vehicles (UAVs) and
remote sensing observations can independently provide dense
vertically resolved measurements of atmospheric aerosols, information which
...is strongly required in climate models. In both cases, inverting the recorded
signals to useful information requires assumptions and constraints, and this
can make the comparison of the results difficult. Here we compare, for the
first time, vertical profiles of the aerosol mass concentration derived from
light detection and ranging (lidar) observations and in situ measurements
using an optical particle counter on board a UAV during moderate and
weak Saharan dust episodes. Agreement between the two measurement methods was
within experimental uncertainty for the coarse mode (i.e. particles having
radii >0.5 µm), where the properties of dust particles can be assumed
with good accuracy. This result proves that the two techniques can be used
interchangeably for determining the vertical profiles of aerosol
concentrations, bringing them a step closer towards their systematic
exploitation in climate models.
The aim of this study is to identify current knowledge gaps in fate, exposure, and toxicity of engineered nanomaterials (ENMs), highlight research gaps, and suggest future research directions. Humans ...and other living organisms are exposed to ENMs during production or use of products containing them. To assess the hazards of ENMs, it is important to assess their physiochemical properties and try to relate them to any observed hazard. However, the full determination of these relationships is currently limited by the lack of empirical data. Moreover, most toxicity studies do not use realistic environmental exposure conditions for determining dose-response parameters, affecting the accurate estimation of health risks associated with the exposure to ENMs. Regulatory aspects of nanotechnology are still developing and are currently the subject of much debate. Synthesis of available studies suggests a number of open questions. These include (i) developing a combination of different analytical methods for determining ENM concentration, size, shape, surface properties, and morphology in different environmental media, (ii) conducting toxicity studies using environmentally relevant exposure conditions and obtaining data relevant to developing quantitative nanostructure-toxicity relationships (QNTR), and (iii) developing guidelines for regulating exposure of ENMs in the environment.
Poor air quality in workplaces constitutes a great concern on human health as a good fraction of our time is spent at work. In Greece, very unique workplaces are the street corner kiosks, which are ...freestanding boxes placed on sidewalks next to city streets and vehicular traffic, where one can find many consumer goods. As such, its employees are exposed to both outdoor and indoor air pollutants. Very few studies have examined the occupational exposure of kiosk workers to air pollutants, and thus the magnitude of this unique indoor and outdoor exposure remains unknown. The objective of this study is to investigate and compare the levels of indoor and outdoor particulate matter (PM10 and PM2.5), ultrafine particles (UFPs) and black carbon (BC) in different kiosks located in Athens, Greece, in urban-traffic and urban-background environments. Continuous measurements of the above-mentioned pollutants were carried out on a 24-h basis over 7 consecutive days at three kiosks from September to October 2019. Indoor PM10 concentrations in the urban kiosk ranged from 19.0 to 44.0 μg/m3, PM2.5 values ranged from 14.0 to 33.0 μg/m3, whereas BC concentrations ranged from 1.2 to 7.0 μg/m3 and UFPs from almost 9.5 to 47.0 × 103 pt/cm3. Outdoor PM10 and PM2.5 measurements ranged from 29.0 to 59.0 μg/m3 and from 22.0 to 39.0 μg/m3, respectively. BC outdoor concentrations ranged from 1.1 to 2.2 μg/m3. The mean hazard quotient (HQ) for PM10 (4.9) and PM2.5 (4.7) among all participants was >1. The health risk of exposure to PM10 and PM2.5 was found to be at moderate hazard levels, although in some cases we observed HQ values higher than 10 due to high PM10 and PM2.5 concentrations in the kiosks. Overall our study indicates that people working at kiosks can be exposed to very high concentrations on particulate pollution depending on a number of factors including the traffic that strongly depends on location and the time of the day.
PDF
