Single-atom catalysts often exhibit unexpected catalytic activity for many important chemical reactions because of their unique electronic and geometric structures with respect to their bulk ...counterparts. Herein we adopt metal–organic frameworks (MOFs) to assist the preparation of a catalyst containing single Ni sites for efficient electroreduction of CO2. The synthesis is based on ionic exchange between Zn nodes and adsorbed Ni ions within the cavities of the MOF. This single-atom catalyst exhibited an excellent turnover frequency for electroreduction of CO2 (5273 h–1), with a Faradaic efficiency for CO production of over 71.9% and a current density of 10.48 mA cm–2 at an overpotential of 0.89 V. Our findings present some guidelines for the rational design and accurate modulation of nanostructured catalysts at the atomic scale.
Single-atom metal catalysts have sparked tremendous attention, but direct transformation of cheap and easily obtainable bulk metal oxide into single atoms is still a great challenge. Here we report a ...facile and versatile gas-transport strategy to synthesize isolated single-atom copper sites (Cu ISAS/NC) catalyst at gram levels. Commercial copper (I) oxide powder is sublimated as mobile vapor at nearly melting temperature (1500 K) and subsequently can be trapped and reduced by the defect-rich nitrogen-doped carbon (NC), forming the isolated copper sites catalyst. Strikingly, this thermally stable Cu ISAS/NC, which is obtained above 1270 K, delivers excellent oxygen reduction performance possessing a recorded half-wave potential of 0.92 V vs RHE among other Cu-based electrocatalysts. By varying metal oxide precursors, we demonstrate the universal synthesis of different metal single atoms anchored on NC materials (M ISAS/NC, where M refers to Mo and Sn). This strategy is readily scalable and the as-prepared sintering-resistant M ISAS/NC catalysts hold great potential in high-temperature applications.
Abstract
Nitric oxide (NO) has been implicated in a variety of physiological and pathological processes. Monitoring cellular levels of NO requires a sensor to feature adequate sensitivity, transient ...recording ability and biocompatibility. Herein we report a single-atom catalysts (SACs)-based electrochemical sensor for the detection of NO in live cellular environment. The system employs nickel single atoms anchored on N-doped hollow carbon spheres (Ni SACs/N-C) that act as an excellent catalyst for electrochemical oxidation of NO. Notably, Ni SACs/N-C shows superior electrocatalytic performance to the commonly used Ni based nanomaterials, attributing from the greatly reduced Gibbs free energy that are required for Ni SACs/N-C in activating NO oxidation. Moreover, Ni SACs-based flexible and stretchable sensor shows high biocompatibility and low nanomolar sensitivity, enabling the real-time monitoring of NO release from cells upon drug and stretch stimulation. Our results demonstrate a promising means of using SACs for electrochemical sensing applications.
Demonstrated here is the correlation between atomic configuration induced electronic density of single‐atom Co active sites and oxygen reduction reaction (ORR) performance by combining ...density‐functional theory (DFT) calculations and electrochemical analysis. Guided by DFT calculations, a MOF‐derived Co single‐atom catalyst with the optimal Co1‐N3PS active moiety incorporated in a hollow carbon polyhedron (Co1‐N3PS/HC) was designed and synthesized. Co1‐N3PS/HC exhibits outstanding alkaline ORR activity with a half‐wave potential of 0.920 V and superior ORR kinetics with record‐level kinetic current density and an ultralow Tafel slope of 31 mV dec−1, exceeding that of Pt/C and almost all non‐precious ORR electrocatalysts. In acidic media the ORR kinetics of Co1‐N3PS/HC still surpasses that of Pt/C. This work offers atomic‐level insight into the relationship between electronic density of the active site and catalytic properties, promoting rational design of efficient catalysts.
The correlation between atomic configuration induced electronic density of single‐atom Co active sites and oxygen reduction reaction (ORR) performance has been established by combining density‐functional theory calculations and electrochemical analysis. A metal–organic framework derived single‐atom Co catalyst, comprising an optimal Co1‐N3PS active moiety supported on hollow carbon polyhedron (Co1‐N3PS/HC), was synthesized, and it exhibits superior alkaline and acidic ORR performance.
Isolated single atomic site catalysts have attracted great interest due to their remarkable catalytic properties. Because of their high surface energy, single atoms are highly mobile and tend to form ...aggregate during synthetic and catalytic processes. Therefore, it is a significant challenge to fabricate isolated single atomic site catalysts with good stability. Herein, a gentle method to stabilize single atomic site metal by constructing defects on the surface of supports is presented. As a proof of concept, single atomic site Au supported on defective TiO2 nanosheets is prepared and it is discovered that (1) the surface defects on TiO2 nanosheets can effectively stabilize Au single atomic sites through forming the Ti–Au–Ti structure; and (2) the Ti–Au–Ti structure can also promote the catalytic properties through reducing the energy barrier and relieving the competitive adsorption on isolated Au atomic sites. It is believed that this work paves a way to design stable and active single atomic site catalysts on oxide supports.
Single atomic sites of Au are supported on defective TiO2 nanosheets and it is discovered that the surface defects on TiO2 nanosheets can effectively stabilize Au single atomic sites through forming a Ti–Au–Ti structure, and this Ti–Au–Ti structure can also promote the catalytic properties through reducing the energy barrier and relieving the competitive adsorption on isolated Au atomic sites.
The development of low‐cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable ...isolated single‐atom Fe/N‐doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half‐wave potential (E1/2) of 0.900 V, which outperformed commercial Pt/C and most non‐precious‐metal catalysts reported to date. Besides exceptionally high kinetic current density (Jk) of 37.83 mV cm−2 at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.
Together alone: Anchored on N‐doped porous carbon via a cage‐encapsulated precursor pyrolysis strategy, isolated single iron atoms exhibit excellent oxygen reduction reaction (ORR) performance, good methanol tolerance, and outstanding stability. Control experiments and theoretical calculations demonstrate that the ORR performance results from the atomically dispersed iron.
The design of active, selective, and stable CO2 reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were ...prepared and their CO2 electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two‐coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm−2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h−1, surpassing most reported metal‐based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO2 to the CO2.− intermediate and hence enhances CO2 electroreduction activity.
A remarkable carbon dioxide electroreduction catalytic performance with superior activity and high selectivity was achieved on atomically dispersed Co sites through coordination environment regulating. First step in picture: C–N fragments, 1000 °C; second step: NH3 treatment.
We develop a host-guest strategy to construct an electrocatalyst with Fe-Co dual sites embedded on N-doped porous carbon and demonstrate its activity for oxygen reduction reaction in acidic ...electrolyte. Our catalyst exhibits superior oxygen reduction reaction performance, with comparable onset potential (E onset, 1.06 vs 1.03 V) and half-wave potential (E 1/2, 0.863 vs 0.858 V) than commercial Pt/C. The fuel cell test reveals (Fe,Co)/N-C outperforms most reported Pt-free catalysts in H2/O2 and H2/air. In addition, this cathode catalyst with dual metal sites is stable in a long-term operation with 50 000 cycles for electrode measurement and 100 h for H2/air single cell operation. Density functional theory calculations reveal the dual sites is favored for activation of O-O, crucial for four-electron oxygen reduction.
Efficient, durable and inexpensive electrocatalysts that accelerate sluggish oxygen reduction reaction kinetics and achieve high-performance are highly desirable. Here we develop a strategy to ...fabricate a catalyst comprised of single iron atomic sites supported on a nitrogen, phosphorus and sulfur co-doped hollow carbon polyhedron from a metal-organic framework@polymer composite. The polymer-based coating facilitates the construction of a hollow structure via the Kirkendall effect and electronic modulation of an active metal center by long-range interaction with sulfur and phosphorus. Benefiting from structure functionalities and electronic control of a single-atom iron active center, the catalyst shows a remarkable performance with enhanced kinetics and activity for oxygen reduction in both alkaline and acid media. Moreover, the catalyst shows promise for substitution of expensive platinum to drive the cathodic oxygen reduction reaction in zinc-air batteries and hydrogen-air fuel cells.
Designing highly active and robust platinum-free catalysts for hydrogen evolution reaction is of vital importance for clean energy applications yet challenging. Here we report highly active and ...stable cobalt-substituted ruthenium nanosheets for hydrogen evolution, in which cobalt atoms are isolated in ruthenium lattice as revealed by aberration-corrected high-resolution transmission electron microscopy and X-ray absorption fine structure measurement. Impressively, the cobalt-substituted ruthenium nanosheets only need an extremely low overpotential of 13 mV to achieve a current density of 10 mA cm
in 1 M KOH media and an ultralow Tafel slope of 29 mV dec
, which exhibit top-level catalytic activity among all reported platinum-free electrocatalysts. The theoretical calculations reveal that the energy barrier of water dissociation can greatly reduce after single cobalt atom substitution, leading to its superior hydrogen evolution performance. This study provides a new insight into the development of highly efficient platinum-free hydrogen evolution catalysts.