ZnO thin film was deposited onto (0
0
0
1) sapphire substrate by a sol–gel method. The as-prepared film was annealed at different temperatures from 600 to 950
°C in argon ambient. Transmittance ...spectra were used to determine the optical constants of the annealed ZnO film, and the effects of the annealing temperature on the optical constants were investigated. Transmittance measurement shows that the absorption edge blueshifts when the annealing temperature is below 750
°C while redshifts when the annealing temperature exceeds 750
°C. With increasing the annealing temperature, the optical constant of ZnO film decreases in the ultraviolet region while increases in the visible region.
Display omitted
•Anaerobic digestion for production of VFAs, biohydrogen and methane.•Specific bioreactor arrangements for VFAs, biohydrogen and methane.•Optimization of temperature, pH, OLR and ...retention time for each product.•Chemical additives and specific treatment process for individual AD product.
The anaerobic digestion process has been primarily utilized for methane containing biogas production over the past few years. However, the digestion process could also be optimized for producing volatile fatty acids (VFAs) and biohydrogen. This is the first review article that combines the optimization approaches for all three possible products from the anaerobic digestion. In this review study, the types and configurations of the bioreactor are discussed for each type of product. This is followed by a review on optimization of common process parameters (e.g. temperature, pH, retention time and organic loading rate) separately for the production of VFA, biohydrogen and methane. This review also includes additional parameters, treatment methods or special additives that wield a significant and positive effect on production rate and these products’ yield.
Accurate diagnosis of Helicobacter pylori(H. pylori) infection is a crucial part in the effective management of many gastroduodenal diseases. Several invasive and non-invasive diagnostic tests are ...available for the detection of H. pylori and each test has its usefulness and limitations in different clinical situations. Although none can be considered as a single gold standard in clinical practice,several techniques have been developed to give the more reliable results. Invasive tests are performed via endoscopic biopsy specimens and these tests include histology,culture,rapid urease test as well as molecular methods. Developments of endoscopic equipment also contribute to the real-time diagnosis of H. pylori during endoscopy. Urea breathingtest and stool antigen test are most widely used noninvasive tests,whereas serology is useful in screening and epidemiological studies. Molecular methods have been used in variable specimens other than gastric mucosa. More than detection of H. pylori infection,several tests are introduced into the evaluation of virulence factors and antibiotic sensitivity of H. pylori,as well as screening precancerous lesions and gastric cancer. The aim of this article is to review the current options and novel developments of diagnostic tests and their applications in different clinical conditions or for specific purposes.
It has been reported that the miR-106b∼25 cluster, a paralog of the miR-17∼92 cluster, possesses oncogenic activities. However, the precise role of each microRNA (miRNA) in the miR-106b∼25 cluster is ...not yet known. In this study, we examined the function of miR-93, one of the microRNAs within the miR-106b∼25 cluster, in angiogenesis and tumor formation. We found that miR-93 enhanced cell survival, promoted sphere formation and augmented tumor growth. Most strikingly, when miR-93-overexpressing U87 cells were co-cultured with endothelial cells, they supported endothelial cell spreading, growth, migration and tube formation. In vivo studies revealed that miR-93-expressing cells induced blood vessel formation, allowing blood vessels to extend to tumor tissues in high densities. Angiogenesis promoted by miR-93 in return facilitated cell survival, resulting in enhanced tumor growth. We further showed that integrin-β8 is a target of miR-93. Higher levels of integrin-β8 are associated with cell death in tumor mass and in human glioblastoma. Silencing of integrin-β8 expression using small interfering RNA promoted cell proliferation, whereas ectopic expression of integrin-β8 decreased cell growth. These findings showed that miR-93 promotes tumor growth and angiogenesis by suppressing, at least in part, integrin-β8 expression. Our results suggest that inhibition of miR-93 function may be a feasible approach to suppress angiogenesis and tumor growth.
Display omitted
•A facile and useful side-by-side electrospinning process.•A new Teflon-coated side-by-side spinneret.•Janus fibers consisting of drug in hydrophilic polymer and insoluble ...polymer.•Biphasic drug release profiles with a tunable release rate at the second phase.•Clear mechanisms for both the preparation and controlled-release applications.
A family of medicated Janus fibers that provides highly tunable biphasic drug release was fabricated using a side-by-side electrospinning process employing a Teflon-coated parallel spinneret. The coated spinneret facilitated the formation of a Janus Taylor cone and in turn high quality integrated Janus structures, which could not be reliably obtained without the Teflon coating. The fibers prepared had one side consisting of polyvinylpyrrolidone (PVP) K60 and ketoprofen, and the other of ethyl cellulose (EC) and ketoprofen. To modulate and tune drug release, PVP K10 was doped into the EC side in some cases. The fibers were linear and had flat morphologies with an indent in the center. They provide biphasic drug release, with the PVP K60 side dissolving very rapidly to deliver a loading dose of the active ingredient, and the EC side resulting in sustained release of the remaining ketoprofen. The addition of PVP K10 to the EC side was able to accelerate the second stage of release; variation in the dopant amount permitted the release rate and extent this phase to be precisely tuned. These results offer the potential to rationally design systems with highly controllable drug release profiles, which can complement natural biological rhythms and deliver maximum therapeutic effects.
The sustained release of a water-soluble drug is always a key and important issue in pharmaceutics. In this study, using cellulose acetate (CA) as a biomacromolecular matrix, core-sheath nanofibers ...were developed for providing a sustained release of a model drug-metformin hydrochloride (MET). The core-sheath nanofibers were fabricated using modified tri-axial electrospinning, in which a detachable homemade spinneret was explored. A process-nanostructure-performance relationship was demonstrated through a series of characterizations. The prepared nanofibers F2 could release 95% of the loaded MET through a time period of 23.4 h and had no initial burst effect. The successful sustained release performances of MET can be attributed to the following factors: (1) the reasonable application of insoluble CA as the filament-forming carrier, which determined that the drug was released through a diffusion manner; (2) the core-sheath nanostructure provided the possibility of both encapsulating the drug completely and realizing the heterogeneous distributions of MET in the nanofibers with a higher drug load core than the sheath; (3) the thickness of the sheath sections were able to be exploited for further manipulating a better drug extended release performance. The mechanisms for manipulating the drug sustained release behaviors are proposed. The present proof-of-concept protocols can pave a new way to develop many novel biomolecule-based nanostructures for extending the release of water-soluble drugs.
Display omitted
A modified tri-axial electrospinning process was developed for the generation of a new type of pH-sensitive polymer/lipid nanocomposite. The systems produced are able to promote both ...dissolution and permeation of a model poorly water-soluble drug. First, we show that it is possible to run a tri-axial process with only one of the three fluids being electrospinnable. Using an electrospinnable middle fluid of Eudragit S100 (ES100) with pure ethanol as the outer solvent and an unspinnable lecithin-diclofenac sodium (PL–DS) core solution, nanofibers with linear morphology and clear core/shell structures can be fabricated continuously and smoothly. X-ray diffraction proved that these nanofibers are structural nanocomposites with the drug present in an amorphous state. In vitro dissolution tests demonstrated that the formulations could preclude release in acidic conditions, and that the drug was released from the fibers in two successive steps at neutral pH. The first step is the dissolution of the shell ES100 and the conversion of the core PL–DS into sub-micron sized particles. This frees some DS into solution, and later the remaining DS is gradually released from the PL–DS particles through diffusion. Ex vivo permeation results showed that the composite nanofibers give a more than twofold uplift in the amount of DS passing through the colonic membrane as compared to pure DS; 74% of the transmitted drug was in the form of PL–DS particles. The new tri-axial electrospinning process developed in this work provides a platform to fabricate structural nanomaterials, and the core–shell polymer-PL nanocomposites we have produced have significant potential applications for oral colon-targeted drug delivery.
A modified tri-axial electrospinning is demonstrated to create a new type of core–shell pH-sensitive polymer/lipid nanocomposites, in which an electrospinnable middle fluid is exploited to support the un-spinnable outer and inner fluids. The structural nanocomposites are able to provide a colon-targeted sustained release and an enhanced permeation performance of diclofenac sodium. The developed tri-axial process can provide a platform for fabricating new structural nanomaterials with high quality. The strategy of a combined usage of polymeric excipients and phospholipid in a core–shell format should provide new possibilities of developing novel drug delivery systems for efficacious oral administration of poorly-water soluble drugs.
The human gut microbiota is a diverse and complex ecosystem that is involved in beneficial physiological functions as well as disease pathogenesis. Blastocystis is a common protistan parasite and is ...increasingly recognized as an important component of the gut microbiota. The correlations between Blastocystis and other communities of intestinal microbiota have been investigated, and, to a lesser extent, the role of this parasite in maintaining the host immunological homeostasis. Despite recent studies suggesting that Blastocystis decreases the abundance of beneficial bacteria, most reports indicate that Blastocystis is a common component of the healthy gut microbiome. This review covers recent finding on the potential interactions between Blastocystis and the gut microbiota communities and its roles in regulating host immune responses.
Tumors exhibit metabolic reprogramming characterized by increased cellular reactive oxygen species (ROS) and the preferential use of glucose, which is known as the Warburg effect. However, the ...mechanisms by which these processes are linked remain largely elusive. Murine tumors lacking Sirt3 exhibit abnormally high levels of ROS that directly induce genomic instability and increase hypoxia-inducible factor 1α (HIF-1α) protein levels. The subsequent transcription of HIFα-dependent target genes results in cellular metabolic reprogramming and increased cellular glucose consumption. In addition, agents that scavenge ROS or reverse the Warburg effect prevent the transformation and malignant phenotype observed in cells lacking Sirt3. Thus, mice lacking Sirt3 provide a model that mechanistically connects aberrant ROS, the Warburg effect, and carcinogenesis.
Display omitted
In nanopharmaceutics, a robust manipulation of the preparation process and an accurate prediction of the final product size are very important for developing novel nano drug delivery ...systems. In the present study, for the first time, a process parameter, i.e. the length of the straight fluid jet, L, is correlated with an experimental parameter, i.e. fluid flow rate, F; a nanofiber property, i.e. diameter, D; and the corresponding drug-sustained release profile. Using a mixed solution consisting of 15% (w/v) polyacrylonitrile and 3% (w/v) ketoprofen in acetone and N,N-dimethylformamide (2:8, v:v) as a spinnable working fluid, a series of medicated nanofibers were prepared under variable F and were characterized. The analysis results disclosed the quantitative relationships among different types of parameters. The process parameter L exhibited a better linear relationship with the nanofibers’ diameter (D) than the processing parameter F. These results give a hint that process parameters can be exploited as useful tools for accurately predicting and tailoring the resultant nanofibers’ D, and in turn their functional performances. The strategy proposed here presents a new approach to investigate the electrohydrodynamic process and manipulate the functions of nanoproducts through process-property-performance relationships.
PDF
