Cells are integral to all forms of life due to their compartmentalization by the plasma membrane. However, living organisms are immensely complex. Thus there is a need for simplified and controllable ...models of life for a deeper understanding of fundamental biological processes and man-made applications. This is where the bottom-up approach of synthetic biology comes from: a stepwise assembly of biomimetic functionalities ultimately into a protocell. A fundamental feature of such an endeavor is the generation and control of model membranes such as liposomes and polymersomes. We compare and contrast liposomes and polymersomes for a better a priori choice and design of vesicles and try to understand the advantages and shortcomings associated with using one or the other in many different aspects (properties, synthesis, self-assembly, applications) and which aspects have been studied and developed with each type and update the current development in the field.
In the field of bottom‐up synthetic biology, lipid vesicles provide an important role in the construction of artificial cells. Giant unilamellar vesicles (GUVs), due to their membrane's similarity to ...natural biomembranes, have been widely used as cellular mimics. So far, several methods exist for the production of GUVs with the possibility to encapsulate biological macromolecules. The inverted emulsion‐based method is one such technique, which has great potential for rapid production of GUVs with high encapsulation efficiencies for large biomolecules. However, the lack of understanding of various parameters that affect production yields has resulted in sparse adaptation within the membrane and bottom‐up synthetic biology research communities. Here, we optimize various parameters of the inverted emulsion‐based method to maximize the production of GUVs. We demonstrate that the density difference between the emulsion droplets, oil phase, and the outer aqueous phase plays a crucial role in vesicle formation. We also investigated the impact that centrifugation speed/time, lipid concentration, pH, temperature, and emulsion droplet volume has on vesicle yield and size. Compared to conventional electroformation, our preparation method was not found to significantly alter the membrane mechanical properties. Finally, we optimize the parameters to minimize the time from workbench to microscope and in this way open up the possibility of time‐sensitive experiments. In conclusion, our findings will promote the usage of the inverted emulsion method for basic membrane biophysics studies as well as the development of GUVs for use as future artificial cells.
The inverted emulsion method can produce giant unilamellar vesicles in physiological buffers with encapsulation of large (bio)molecules. Our study focuses on the optimization of the parameters for maximizing yields including; lipid concentration, centrifugal force, incubation time, aqueous emulsion volume, and buffers. We also investigate the biomimetic properties and functionality of the membranes to facilitate the wider use of the method.
We report a novel and facile method for measuring edge tensions of lipid membranes. The approach is based on electroporation of giant unilamellar vesicles and analysis of the pore closure dynamics. ...We applied this method to evaluate the edge tension in membranes with four different compositions: egg phosphatidylcholine (eggPC), dioleoylphosphatidylcholine (DOPC), and mixtures of DOPC with cholesterol and dioleoylphosphatidylethanolamine. Our data confirm previous results for eggPC and DOPC. The addition of 17 mol % cholesterol to the DOPC membrane causes an increase in the membrane edge tension. On the contrary, when the same fraction of dioleoylphosphatidylethanolamine is added to the membrane, a decrease in the edge tension is observed, which is an unexpected result considering the inverted-cone shape geometry of the molecule. It is presumed that interlipid hydrogen bonding is the origin of this behavior. Furthermore, cholesterol was found to lower the lysis tension of DOPC bilayers. This behavior differs from that observed on bilayers made of stearoyloleoylphosphatidylcholine, suggesting that cholesterol influences the membrane mechanical stability in a lipid-specific manner.
A simple, high yield, chemical process is developed to fabricate layered h-BN nanosheets and BCNO nanoparticles with a diameter of ca. 5 nm at 700 °C. The use of the eutectic LiCl/KCl salt melt ...medium enhances the kinetics of the reaction between sodium borohydride and urea or guanidine as well as the dispersion of the nanoparticles in water. The carbon content can be tuned from 0 to 50 mol % by adjusting the reactant ratio, thus providing precise control of the light emission of the particles in the range 440–528 nm while reaching a quantum yield of 26%. Because of their green synthesis, low toxicity, small size, and stability against aggregation in water, the as-obtained photoluminescent BCNO nanoparticles show promise for diagnostics and optoelectronics.
This review gives a brief overview of experimental approaches used to assess the bending rigidity of membranes. Emphasis is placed on techniques based on the use of giant unilamellar vesicles. We ...summarize the effect on the bending rigidity of membranes as a function of membrane composition, presence of various inclusions in the bilayer and molecules and ions in the bathing solutions. Examples for the impact of temperature, cholesterol, some peptides and proteins, sugars and salts are provided and the literature data are discussed critically. Future directions, open questions and possible developments in this research field are also included.
Display omitted
•A number of techniques have been developed to assess the membrane bending rigidity.•Presumably, the most popular experimental approach is fluctuation spectroscopy.•The bending rigidity exhibits anomalous decrease close to the main phase transition.•Cholesterol affects the membrane stiffness in a lipid-specific manner.•Charged species increasing the surface charge of the bilayer stiffen the membrane.•Salts and sugars act to soften the membrane.
Membrane fusion is a ubiquitous process in biology and is a prerequisite for many intracellular delivery protocols relying on the use of liposomes as drug carriers. Here, we investigate in detail the ...process of membrane fusion and the role of opposite charges in a protein-free lipid system based on cationic liposomes (LUVs, large unilamellar vesicles) and anionic giant unilamellar vesicles (GUVs) composed of different palmitoyloleoylphosphatidylcholine (POPC)/palmitoyloleoylphosphatidylglycerol (POPG) molar ratios. By using a set of optical-microscopy- and microfluidics-based methods, we show that liposomes strongly dock to GUVs of pure POPC or low POPG fraction (up to 10 mol%) in a process mainly associated with hemifusion and membrane tension increase, commonly leading to GUV rupture. On the other hand, docked LUVs quickly and very efficiently fuse with negative GUVs of POPG fractions at or above 20 mol%, resulting in dramatic GUV area increase in a charge-dependent manner; the vesicle area increase is deduced from GUV electrodeformation. Importantly, both hemifusion and full fusion are leakage-free. Fusion efficiency is quantified by the lipid transfer from liposomes to GUVs using fluorescence resonance energy transfer (FRET), which leads to consistent results when compared to fluorescence-lifetime-based FRET. We develop an approach to deduce the final composition of single GUVs after fusion based on the FRET efficiency. The results suggest that fusion is driven by membrane charge and appears to proceed up to charge neutralization of the acceptor GUV.
In situ, reversible coacervate formation within lipid vesicles represents a key step in the development of responsive synthetic cellular models. Herein, we exploit the pH responsiveness of a ...polycation above and below its pKa, to drive liquid–liquid phase separation, to form single coacervate droplets within lipid vesicles. The process is completely reversible as coacervate droplets can be disassembled by increasing the pH above the pKa. We further show that pH‐triggered coacervation in the presence of low concentrations of enzymes activates dormant enzyme reactions by increasing the local concentration within the coacervate droplets and changing the local environment around the enzyme. In conclusion, this work establishes a tunable, pH responsive, enzymatically active multi‐compartment synthetic cell. The system is readily transferred into microfluidics, making it a robust model for addressing general questions in biology, such as the role of phase separation and its effect on enzymatic reactions using a bottom‐up synthetic biology approach.
The pH responsiveness of a polycation above and below its pKa is used to drive liquid–liquid phase separation to form coacervate droplets within lipid vesicles. This is reversible as the coacervate droplets can be disassembled by increasing the pH above the pKa. pH‐triggered coacervation in the presence of low concentrations of enzymes activates dormant reactions as the local enzyme and substrate concentrations are increased in the coacervate droplets which concomitantly changes the local environment of enzymes and reactants.
Cells compartmentalize parts of their interiors into liquid-like condensates, which can be reconstituted in vitro. Although these condensates interact with membrane-bound organelles, their potential ...for membrane remodeling and the underlying mechanisms of such interactions are not well-understood. Here, we demonstrate that interactions between protein condensates - including hollow ones, and membranes can lead to remarkable morphological transformations and provide a theoretical framework to describe them. Modulation of solution salinity or membrane composition drives the condensate-membrane system through two wetting transitions, from dewetting, through a broad regime of partial wetting, to complete wetting. When sufficient membrane area is available, fingering or ruffling of the condensate-membrane interface is observed, an intriguing phenomenon producing intricately curved structures. The observed morphologies are governed by the interplay of adhesion, membrane elasticity, and interfacial tension. Our results highlight the relevance of wetting in cell biology, and pave the way for the design of synthetic membrane-droplet based biomaterials and compartments with tunable properties.
Giant unilamellar vesicles represent a promising and extremely useful model biomembrane system for systematic measurements of mechanical, thermodynamic, electrical, and rheological properties of ...lipid bilayers as a function of membrane composition, surrounding media, and temperature. The most important advantage of giant vesicles over other model membrane systems is that the membrane responses to external factors such as ions, (macro)molecules, hydrodynamic flows, or electromagnetic fields can be directly observed under the microscope. Here, we briefly review approaches for giant vesicle preparation and describe several assays used for deducing the membrane phase state and measuring a number of material properties, with further emphasis on membrane reshaping and curvature.
Biological membranes possess intrinsic asymmetry. This asymmetry is associated not only with leaflet composition in terms of membrane species but also with differences in the cytosolic and ...periplasmic solutions containing macromolecules and ions. There has been a long quest for understanding the effect of ions on the physical and morphological properties of membranes. Here, we elucidate the changes in the mechanical properties of membranes exposed to asymmetric buffer conditions and the associated curvature generation. As a model system, we used giant unilamellar vesicles (GUVs) with asymmetric salt and sugar solutions on the two sides of the membrane. We aspirated the GUVs into micropipettes and attached small beads to their membranes. An optical tweezer was used to exert a local force on a bead, thereby pulling out a membrane tube from the vesicle. The assay allowed us to measure the spontaneous curvature and the bending rigidity of the bilayer in the presence of different ions and sugar. At low sugar/salt (inside/out) concentrations, the membrane spontaneous curvature generated by NaCl and KCl is close to zero, but negative in the presence of LiCl. In the latter case, the membrane bulges away from the salt solution. At high sugar/salt conditions, the membranes were observed to become more flexible and the spontaneous curvature was enhanced to even more negative values, comparable to those generated by some proteins. Our findings reveal the reshaping role of alkali chlorides on biomembranes.