We study the use of cadmium telluride (CdTe) nanocrystal colloids as a solution-processable “ink” for large-grain CdTe absorber layers in solar cells. The resulting grain structure and solar cell ...performance depend on the initial nanocrystal size, shape, and crystal structure. We find that inks of predominantly wurtzite tetrapod-shaped nanocrystals with arms ∼5.6 nm in diameter exhibit better device performance compared to inks composed of smaller tetrapods, irregular faceted nanocrystals, or spherical zincblende nanocrystals despite the fact that the final sintered film has a zincblende crystal structure. Five different working device architectures were investigated. The indium tin oxide (ITO)/CdTe/zinc oxide structure leads to our best performing device architecture (with efficiency >11%) compared to others including two structures with a cadmium sulfide (CdS) n-type layer typically used in high efficiency sublimation-grown CdTe solar cells. Moreover, devices without CdS have improved response at short wavelengths.
We present a comprehensive investigation into the potential of
n
-type indium-doped cadmium selenide telluride (CST:In) as a high-performance candidate for solar cell applications, without the need ...for resource-intensive post-growth treatments that are required for CdTe:In. We compared undoped CST and CST:In crystals under different growth conditions, analyzing their structural and electronic properties using x-ray diffraction (XRD), electron probe microanalysis (EPMA), current–voltage (IV) and Hall effect measurements, time-resolved photoluminescence (TRPL), optical transmission, and photoluminescence (PL) mapping. The results reveal that as-grown CST:In crystals achieve nearly 100% carrier activation, yielding an electron concentration of 9.5 × 10
18
cm
−3
, mobility of 653 cm
2
/V·s and a 5 ns lifetime which approaches the radiative limit. Furthermore, comparison of PL maps from crystal growths having different cooling profiles suggests a strong effect of cooling rate on selenium segregation and cubic/hexagonal/polytype phase distribution. Slower cooling leads to a more homogeneous cubic structure with lower Se segregation, while a faster cooling rate results in increased Se segregation, and twin boundaries and stacking faults with polytypic and hexagonal character.
Mg x Zn 1- x O (MZO) shows great promise to replace CdS as a buffer layer in CdTe-based solar cells. It is more transparent, and the MZO bandgap and electron density can be tuned, thus providing ...flexibility in controlling the conduction band offsets and recombination rates between transparent conductive oxide/MZO and MZO/CdSeTe interfaces. Integrating this material into solar cell devices has been frustrated by the common observation of abnormal current-voltage curves. Simulations indicate that this anomalous behavior can be attributed to front interface barrier effects. Experiments demonstrate that this common MZO interface problem can be resolved experimentally by surface preparation, preheat steps, and removing oxygen during absorber deposition and CdCl 2 treatment. Oxygen during the cell fabrication process is likely to alter MZO properties and MZO/CdSeTe band alignment. After addressing these interface issues and modest optimization, devices with high short-circuit density of 29 mA/cm 2 and efficiency above 16% are demonstrated.
CdTe-based solar cells exhibiting 19% power conversion efficiency were produced using widely available thermal evaporation deposition of the absorber layers on SnO2-coated glass with or without a ...transparent MgZnO buffer layer. Evaporating CdSe and CdTe sequentially by thermal evaporation and subsequent CdCl2 annealing establishes efffective CdSeTe band grading as well as dense, large-grain films. These results show that high-performance II–VI photovoltaics can be made by inexpensive, commercially available evaporation systems without the need to build customized equipment, enabling CdTe photovoltaics research and manufacturing to be more accessible to the broader photovoltaics community.
Voltage loss is currently one of the biggest challenges facing cadmium telluride (CdTe) based photovoltaics. Determining the location(s) of major voltage loss within the device stack (e.g., ...front/back interface, grain boundaries) is therefore of primary interest. Here, we present a custom-built time-resolved photoluminescence system with two excitation wavelengths-670 (standard) and 405 nm-to probe the device stack at depths of approximately 130 and 35 nm, respectively; their comparison helps differentiate interface and bulk contributions to carrier lifetime. We apply this system to examine the passivation effect of two significant recent advances in CdTe: the incorporation of Se to form graded CdSe x Te 1-x and the replacement of CdS with Mg y Zn 1-y O. It is found that x = 0.2 Se is required to obtain lifetime improvements, primarily in the bulk. Additionally, evidence for trapping at the Mg y Zn 1-y O/CdSe x Te 1-x interface was observed. This indicates further work is required to sufficiently passivate the front interface.
We describe a new time-resolved photoluminescence (TRPL) analysis method for the determination of minority carrier lifetime {\tau}_{B} . This analysis is based on subbandgap excitation (two-photon ...excitation, or 2PE) and allows selective lifetime determination at the surface or in the bulk of semiconductor absorbers. We show that for single-crystal CdTe, {\tau}_{B} could be determined even if surface recombination velocity is >10 ^{5} cm s ^{-1} . Two-photon excitation TRPL measurements indicate that radiative lifetime in undoped CdTe is >>66 ns. We also compare one-photon excitation (1PE) and 2PE TRPL data for polycrystalline CdS/CdTe thin films.
•High pressure Bridgman technique is suitable to synthesize CdTe from elemental sources.•Highly volatile dopants can be efficiently incorporated into melt grown CdTe under high pressure.•High purity ...level in CdTe is achievable in scalable HPB melt growth process.
Efficient, safe and cost-effective synthesis of CdTe from elements is rather challenging in silica sealed ampoules due to the high vapor pressure of Cd. In this article, we report on the integrated synthesis and crystal growth of high-purity CdTe using the high pressure Bridgman (HPB) technique that is scalable to large volumes. The process lends itself for cost competitive industrial production of polycrystalline feedstock material for photovoltaics, sensors and electro-optic applications. Cadmium telluride (CdTe) crystals exceeding 1 kg in size were synthesized from elemental Cd and Te sources with purity comparable to state-of-the-art gamma ray detector crystals. In addition, synthesis of highly-doped CdTe feedstock for thin film photovoltaics applications demonstrating effective incorporation of group V (As, Sb) dopants was achieved at growth speeds of ~500 mm/hr. The technique may be applicable to produce other II-VI compounds with volatile components.