A fundamental aspect of any element is the range of oxidation states accessible for useful chemistry. This tutorial describes the recent expansion of the number of oxidation states available to the ...rare-earth and actinide metals in molecular complexes that has resulted through organometallic chemistry involving the cyclopentadienyl ligand. These discoveries demonstrate that the cyclopentadienyl ligand, which has been a key component in the development of organometallic chemistry since the seminal discovery of ferrocene in the 1950s, continues to contribute to the advancement of science. Background information on the rare-earth and actinide elements is presented, as well as the sequence of events that led to these unexpected developments in the oxidation state chemistry of these metals.
Pyrolysis is one of the thermochemical technologies for converting biomass into energy and chemical products consisting of liquid bio-oil, solid biochar, and pyrolytic gas. Depending on the heating ...rate and residence time, biomass pyrolysis can be divided into three main categories slow (conventional), fast and flash pyrolysis mainly aiming at maximising either the bio-oil or biochar yields. Synthesis gas or hydrogen-rich gas can also be the target of biomass pyrolysis. Maximised gas rates can be achieved through the catalytic pyrolysis process, which is now increasingly being developed. Biomass pyrolysis generally follows a three-step mechanism comprising of dehydration, primary and secondary reactions. Dehydrogenation, depolymerisation, and fragmentation are the main competitive reactions during the primary decomposition of biomass. A number of parameters affect the biomass pyrolysis process, yields and properties of products. These include the biomass type, biomass pretreatment (physical, chemical, and biological), reaction atmosphere, temperature, heating rate and vapour residence time. This manuscript gives a general summary of the properties of the pyrolytic products and their analysis methods. Also provided are a review of the parameters that affect biomass pyrolysis and a summary of the state of industrial pyrolysis technologies.
Assessment of the global burden of disease is based on epidemiological cohort studies that connect premature mortality to a wide range of causes, including the long-term health impacts of ozone and ...fine particulate matter with a diameter smaller than 2.5 micrometres (PM2.5). It has proved difficult to quantify premature mortality related to air pollution, notably in regions where air quality is not monitored, and also because the toxicity of particles from various sources may vary. Here we use a global atmospheric chemistry model to investigate the link between premature mortality and seven emission source categories in urban and rural environments. In accord with the global burden of disease for 2010 (ref. 5), we calculate that outdoor air pollution, mostly by PM2.5, leads to 3.3 (95 per cent confidence interval 1.61-4.81) million premature deaths per year worldwide, predominantly in Asia. We primarily assume that all particles are equally toxic, but also include a sensitivity study that accounts for differential toxicity. We find that emissions from residential energy use such as heating and cooking, prevalent in India and China, have the largest impact on premature mortality globally, being even more dominant if carbonaceous particles are assumed to be most toxic. Whereas in much of the USA and in a few other countries emissions from traffic and power generation are important, in eastern USA, Europe, Russia and East Asia agricultural emissions make the largest relative contribution to PM2.5, with the estimate of overall health impact depending on assumptions regarding particle toxicity. Model projections based on a business-as-usual emission scenario indicate that the contribution of outdoor air pollution to premature mortality could double by 2050.
An operando electrochemical stage for the transmission electron microscope has been configured to form a “Li battery” that is used to quantify the electrochemical processes that occur at the anode ...during charge/discharge cycling. Of particular importance for these observations is the identification of an image contrast reversal that originates from solid Li being less dense than the surrounding liquid electrolyte and electrode surface. This contrast allows Li to be identified from Li-containing compounds that make up the solid-electrolyte interphase (SEI) layer. By correlating images showing the sequence of Li electrodeposition and the evolution of the SEI layer with simultaneously acquired and calibrated cyclic voltammograms, electrodeposition, and electrolyte breakdown processes can be quantified directly on the nanoscale. This approach opens up intriguing new possibilities to rapidly visualize and test the electrochemical performance of a wide range of electrode/electrolyte combinations for next generation battery systems.
ABSTRACT The total gas mass of a protoplanetary disk is a fundamental, but poorly determined, quantity. A new technique has been demonstrated to assess directly the bulk molecular gas reservoir of ...molecular hydrogen using the HD J = 1-0 line at 112 m. In this work we present a Herschel Space Observatory10 survey of six additional T Tauri disks in the HD line. Line emission is detected at >3 significance in two cases: DM Tau and GM Aur. For the other four disks, we establish upper limits to the line flux. Using detailed disk structure and ray-tracing models, we calculate the temperature structure and dust mass from modeling the observed spectral energy distributions, and we include the effect of UV gas heating to determine the amount of gas required to fit the HD line. The ranges of gas masses are 1.0-4.7 × 10−2 for DM Tau and 2.5-20.4 × 10−2 for GM Aur. These values are larger than those found using CO for GM Aur, while the CO-derived gas mass for DM Tau is consistent with the lower end of our mass range. This suggests a CO chemical depletion from the gas phase of up to a factor of five for DM Tau and up to two orders of magnitude for GM Aur. We discuss how future analysis can narrow the mass ranges further.
We discuss the parameter spaces of supersymmetry (SUSY) scenarios taking into account the improved Higgs-mass prediction provided by FeynHiggs 2.14.1. Among other improvements, this prediction ...incorporates three-loop renormalization-group effects and two-loop threshold corrections, and can accommodate three separate mass scales:
m
q
~
(for squarks),
m
g
~
(for gluinos) and
m
χ
~
(for electroweakinos). Furthermore, it contains an improved treatment of the
DR
¯
scalar top parameters avoiding problems with the conversion to on-shell parameters, that yields more accurate results for large SUSY-breaking scales. We first consider the CMSSM, in which the soft SUSY-breaking parameters
m
0
and
m
1
/
2
are universal at the GUT scale, and then sub-GUT models in which universality is imposed at some lower scale. In both cases, we consider the constraints from the Higgs-boson mass
M
h
in the bulk of the
(
m
0
,
m
1
/
2
)
plane and also along stop coannihilation strips where sparticle masses may extend into the multi-TeV range. We then consider the minimal anomaly-mediated SUSY-breaking scenario, in which large sparticle masses are generic. In all these scenarios the substantial improvements between the calculations of
M
h
in FeynHiggs 2.14.1 and FeynHiggs 2.10.0, which was used in an earlier study, change significantly the preferred portions of the models’ parameter spaces. Finally, we consider the pMSSM11, in which sparticle masses may be significantly smaller and we find only small changes in the preferred regions of parameter space.
The non-combustion based renewable electricity generation technologies were assessed against a range of sustainability indicators and using data obtained from the literature. The indicators used to ...assess each technology were price of generated electricity, greenhouse gas emissions during full life cycle of the technology, availability of renewable sources, efficiency of energy conversion, land requirements, water consumption and social impacts. The cost of electricity, greenhouse gas emissions and the efficiency of electricity generation were found to have a very wide range for each technology, mainly due to variations in technological options as well as geographical dependence of each renewable energy source. The social impacts were assessed qualitatively based on the major individual impacts discussed in literature. Renewable energy technologies were then ranked against each indicator assuming that indicators have equal importance for sustainable development. It was found that wind power is the most sustainable, followed by hydropower, photovoltaic and then geothermal. Wind power was identified with the lowest relative greenhouse gas emissions, the least water consumption demands and with the most favourable social impacts comparing to other technologies, but requires larger land and has high relative capital costs.
STAR FORMATION RELATIONS IN THE MILKY WAY Vutisalchavakul, Nalin; Evans II, Neal J.; Heyer, Mark
The Astrophysical journal,
11/2016, Letnik:
831, Številka:
1
Journal Article
Recenzirano
Odprti dostop
ABSTRACT The relations between star formation and properties of molecular clouds (MCs) are studied based on a sample of star-forming regions in the Galactic Plane. Sources were selected by having ...radio recombination lines to provide identification of associated MCs and dense clumps. Radio continuum emission and mid-infrared emission were used to determine star formation rates (SFRs), while 13CO and submillimeter dust continuum emission were used to obtain the masses of molecular and dense gas, respectively. We test whether total molecular gas or dense gas provides the best predictor of SFR. We also test two specific theoretical models, one relying on the molecular mass divided by the free-fall time, the other using the free-fall time divided by the crossing time. Neither is supported by the data. The data are also compared to those from nearby star-forming regions and extragalactic data. The star formation "efficiency," defined as SFR divided by mass, spreads over a large range when the mass refers to molecular gas; the standard deviation of the log of the efficiency decreases by a factor of three when the mass of relatively dense molecular gas is used rather than the mass of all of the molecular gas.