Deep diffused Avalanche photodiodes for charged particles timing Centis Vignali, M.; Dias De Almeida, P.; Franconi, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2020, Letnik:
958, Številka:
C
Journal Article
Recenzirano
Odprti dostop
The upgrades of ATLAS and CMS for the High Luminosity LHC (HL-LHC) highlighted physics objects timing as a tool to resolve primary interactions within a bunch crossing. Since the expected pile-up is ...around 200, with an r.m.s. time spread of 180ps, a time resolution of about 30ps is needed. The timing detectors will experience a 1-MeV neutron equivalent fluence of about Φeq=1014 and 1015cm−2 for the barrel and end-cap regions, respectively. In this contribution, deep diffused Avalanche Photo Diodes (APDs) produced by Radiation Monitoring Devices are examined as candidate timing detectors for HL-LHC applications. To improve the detector’s timing performance, the APDs are used to directly detect the traversing particles, without a radiator medium where light is produced. Devices with an active area of 8 × 8mm2 were characterized in beam tests. The timing performance and signal properties were measured as a function of position on the detector using a beam telescope and a microchannel plate photomultiplier (MCP-PMT). Devices with an active area of 2 × 2mm2 were used to determine the effects of radiation damage and characterized using a ps pulsed laser. These detectors were irradiated with neutrons up to Φeq=1015cm−2.
GEM based detector for future upgrade of the CMS forward muon system Abbaneo, D.; Armagnaud, C.; Abbrescia, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2013, Letnik:
718
Journal Article
Recenzirano
In view of an upgrade of the CMS experiment, the GEM for CMS collaboration is performing feasibility studies on employing Triple-GEM detectors for the high-η region (1.6–2.4) of the CMS endcaps. A ...detailed review of the development and characterization of the CMS full-size prototype baseline detector will be presented. GEMs have excellent spatial and time resolution, high rate capability and radiation hardness, they are an appealing option for simultaneously enhancing muon tracking and triggering capabilities in the high-η region. The GEM for CMS collaboration has studied the performance of small and full-size prototype detectors during several test beam campaigns in order to validate new technologies and techniques in view of a mass production for CMS experiment. Results from measurements with x-rays and from test beam campaigns at the CERN SPS will be shown from both small and large prototypes.
The status of the GEM project for CMS high-η muon system Abbaneo, D.; Abbrescia, M.; Armagnaud, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2013, Letnik:
732
Journal Article
Recenzirano
Odprti dostop
The dedicated CMS R&D program was intended to study the feasibility of using micropattern detectors for the instrumentation of the vacant |η|>1.6 region in the present Resistive Plate Chambers (RPCs) ...endcap system. The proposed detector for CMS is a Triple-Gas Electron Multiplier (GEM) trapezoidal chamber, equipped with 1D readout. While during 2010–2011 the Collaboration worked on the prototyping of the detector, during the first part of 2012 a newly developed assembly technique to be used for the mass production was adopted. GEMs can provide precision tracking and fast trigger information, contributing on one hand to the improvement of the CMS muon Trigger and on the other hand to provide the missing redundancy in the high η region. In the view of the next LHC long shutdown (LS1) the CMS GEM Collaboration designed and built four full-size Triple GEM-based muon detectors.
The CMS GEM collaboration is considering Gas Electron Multipliers (GEMs) for upgrading the CMS forward muon system in the 1.5 <; |η| <; 2.4 endcap region. GEM detectors can provide precision tracking ...and fast trigger information. They would improve the CMS muon trigger and muon momentum resolution and provide missing redundancy in the high-η region. Employing a new faster construction and assembly technique, we built four full-scale Triple-GEM muon detectors for the inner ring of the first muon endcap station. We plan to install these or further improved versions in CMS during the first long LHC shutdown in 2013/14 for continued testing. These detectors are designed for the stringent rate and resolution requirements in the increasingly hostile environments expected at CMS after the second long LHC shutdown in 2018/19. The new prototypes were studied in muon/pion beams at the CERN SPS. We discuss our experience with constructing the new full-scale production prototypes and present preliminary performance results from the beam test. We also tested smaller Triple-GEM prototypes with zigzag readout strips with 2 mm pitch in these beams and measured a spatial resolution of 73 μm. This readout offers a potential reduction of channel count and consequently electronics cost for this system while maintaining high spatial resolution.
At present, part of the forward RPC muon system of the CMS detector at the CERN LHC remains uninstrumented in the high-η region. An international collaboration is investigating the possibility of ...covering the 1.6 <; |η| <; 2.4 region of the muon endcaps with large-area triple-GEM detectors. Given their good spatial resolution, high rate capability, and radiation hardness, these micro-pattern gas detectors are an appealing option for simultaneously enhancing muon tracking and triggering capabilities in a future upgrade of the CMS detector. A general overview of this feasibility study will be presented. The design and construction of small (10×10 cm 2 ) and full-size trapezoidal (1 × 0.5 m 2 ) triple-GEM prototypes will be described. During detector assembly, different techniques for stretching the GEM foils were tested. Results from measurements with x-rays and from test beam campaigns at the CERN SPS will be shown for the small and large prototypes. Preliminary simulation studies on the expected muon reconstruction and trigger performances of this proposed upgraded muon system will be reported.
Gas Electron Multipliers (GEM) are an interesting technology under consideration for the future upgrade of the forward region of the CMS muon system, specifically in the 1.6 <; |η| <; 2:4 endcap ...region. With a sufficiently fine segmentation GEMs can provide precision tracking as well as fast trigger information. The main objective is to contribute to the improvement of the CMS muon trigger. The construction of large-area GEM detectors is challenging both from the technological and production aspects. In view of the CMS upgrade we have designed and built the largest full-size Triple-GEM muon detector, which is able to meet the stringent requirements given the hostile environment at the high-luminosity LHC. Measurements were performed during several test beam campaigns at the CERN SPS in 2010 and 2011. The main issues under study are efficiency, spatial resolution and timing performance with different inter-electrode gap configurations and gas mixtures. In this paper results of the performance of the prototypes at the beam tests will be discussed.
The status of the GEM project for CMS high- eta eta muon system Abbaneo, D; Abbrescia, M; Armagnaud, C ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2013, Letnik:
732
Journal Article
Recenzirano
The dedicated CMS R&D program was intended to study the feasibility of using micropattern detectors for the instrumentation of the vacant | eta |>1.6| eta |>1.6 region in the present Resistive Plate ...Chambers (RPCs) endcap system. The proposed detector for CMS is a Triple-Gas Electron Multiplier (GEM) trapezoidal chamber, equipped with 1D readout. While during 2010-2011 the Collaboration worked on the prototyping of the detector, during the first part of 2012 a newly developed assembly technique to be used for the mass production was adopted. GEMs can provide precision tracking and fast trigger information, contributing on one hand to the improvement of the CMS muon Trigger and on the other hand to provide the missing redundancy in the high eta eta region. In the view of the next LHC long shutdown (LS1) the CMS GEM Collaboration designed and built four full-size Triple GEM-based muon detectors.
PDF
