Microfluidic systems are of paramount importance in various fields such as medicine, biology, and pharmacy. Despite the plethora of methods, accurate dosing and mixing of small doses of liquid ...reagents remain challenges for microfluidics. In this paper, we present a microfluidic device that uses two micro pumps and an alternating drive pattern to fill a microchannel. With a capacitive sensor system, we monitored the fluid process and controlled the micro pumps. In a first experiment, the system was set up to generate a 1:1 mixture between two fluids while using a range of fluid packet sizes from 0.25 to 2 µL and pumping frequencies from 50 to 100 Hz. In this parameter range, a dosing accuracy of 50.3 ± 0.9% was reached, validated by a gravimetric measurement. Other biased mixing ratios were tested as well and showed a deviation of 0.3 ± 0.3% from the targeted mixing ratio. In a second experiment, Trypan blue was used to study the mixing behavior of the system. Within one to two dosed packet sets, the two reagents were reliably mixed. The results are encouraging for future use of micro pumps and capacitive sensing in demanding microfluidic applications.
For the treatment of human immunodeficiency virus (HIV)-infected patients, the regular assessment of the immune status is indispensable. The quantification of CD4
T lymphocytes in blood by gold ...standard optical flow cytometry is not point-of-care testing (POCT) compatible. This incompatibility is due to unavoidable pre-analytics, expensive and bulky optics with limited portability, and complex workflow integration. Here, we propose a non-optical, magnetic flow cytometry (MFC) workflow that offers effortless integration opportunities, including minimal user interaction, integrated sample preparation and up-concentration, and miniaturization. Furthermore, we demonstrate immunomagnetic CD4
T lymphocyte labeling in whole blood with subsequent quantification using sheath-less MFC. Showing linearity over two log scales and being largely unimpaired by hematocrit, evidence is provided for POCT capabilities of HIV patients.
Electrical Detection of Single Viruses Patolsky, Fernando; Zheng, Gengfeng; Hayden, Oliver ...
Proceedings of the National Academy of Sciences,
09/2004, Letnik:
101, Številka:
39
Journal Article
Recenzirano
Odprti dostop
We report direct, real-time electrical detection of single virus particles with high selectivity by using nanowire field effect transistors. Measurements made with nanowire arrays modified with ...antibodies for influenza A showed discrete conductance changes characteristic of binding and unbinding in the presence of influenza A but not paramyxovirus or adenovirus. Simultaneous electrical and optical measurements using fluorescently labeled influenza A were used to demonstrate conclusively that the conductance changes correspond to binding/unbinding of single viruses at the surface of nanowire devices. pH-dependent studies further show that the detection mechanism is caused by a field effect, and that the nanowire devices can be used to determine rapidly isoelectric points and variations in receptor-virus binding kinetics for different conditions. Lastly, studies of nanowire devices modified with antibodies specific for either influenza or adenovirus show that multiple viruses can be selectively detected in parallel. The possibility of large-scale integration of these nanowire devices suggests potential for simultaneous detection of a large number of distinct viral threats at the single virus level.
In the face of the COVID-19 pandemic, the need for rapid serological tests that allow multiplexing emerged, as antibody seropositivity can instruct about individual immunity after an infection with ...SARS-CoV-2 or after vaccination. As many commercial antibody tests are either time-consuming or tend to produce false negative or false positive results when only one antigen is considered, we developed an automated, flow-based chemiluminescence microarray immunoassay (CL-MIA) that allows for the detection of IgG antibodies to SARS-CoV-2 receptor-binding domain (RBD), spike protein (S1 fragment), and nucleocapsid protein (N) in human serum and plasma in less than 8 min. The CoVRapid CL-MIA was tested with a set of 65 SARS-CoV-2 serology positive or negative samples, resulting in 100% diagnostic specificity and 100% diagnostic sensitivity, thus even outcompeting commercial tests run on the same sample set. Additionally, the prospect of future quantitative assessments (i.e., quantifying the level of antibodies) was demonstrated. Due to the fully automated process, the test can easily be operated in hospitals, medical practices, or vaccination centers, offering a valuable tool for COVID-19 serosurveillance.
Graphical abstract
Lateral-flow immunoassays and laboratory diagnostic tests like enzyme-linked immunosorbent assays (ELISAs) are powerful diagnostic tools to help fight the COVID-19 pandemic using them as antigen or ...antibody tests. However, the need emerges for alternative bioanalytical systems that combine their favorable featuressimple, rapid, and cost-efficient point-of-care (POC) analysis of lateral-flow immunoassays and higher reliability of laboratory testswhile eliminating their disadvantages (limited sensitivity and specificity of lateral-flow assays and prolonged time and work expenditure of laboratory analysis). An additional need met by only a few tests is multiplexing, allowing for the analysis of several immunorecognition patterns at the same time. We herein present a strategy to combine all desirable attributes of the different test types by means of a flow-based chemiluminescence microarray immunoassay. Laminated polycarbonate microarray chips were developed for easy production and subsequent application in the fully automated microarray analysis platform MCR-R, where a novel flow cell design minimizes the sample volume to 40 μL. This system was capable of detecting IgG antibodies to SARS-CoV-2 with 100% sensitivity and specificity using recombinant antigens for the SARS-CoV-2 spike S1 protein, nucleocapsid protein, and receptor binding domain. The analysis was accomplished within under 4 min from serum, plasma, and whole blood, making it also useful in POC settings. Additionally, we showed the possibility of serosurveillance after infection or vaccination to monitor formerly unnoticed breakthrough infections in the population as well as to detect the need for booster vaccination after the natural decline of the antibody titer below detectable levels. This will help in answering pressing questions on the importance of the antibody response to SARS-CoV-2 that so far remain open. Additionally, even the sequential detection of IgM and IgG antibodies was possible, allowing for statements on the time response of an infection. While our serodiagnostic application focuses on SARS-CoV-2, the same approach is easily adjusted to other diseases, making it a powerful tool for future serological testing.
Early detection and functional analysis of circulating tumor cells (CTCs) in liquid biopsy rather than counting them offer great promise as physicians can improve differential diagnosis for second‐ ...or third‐line treatment beyond today's genotype information from next‐generation sequencing and the limited statistical power of histopathology analysis. Microfluidics holds a great potential for an accurate and reliable isolation and analytical examination of cancer liquid biopsy. This review describes fundamentals and technological breakthroughs of immunolabeled and label‐free analytical microfluidic chips (µ‐chips), developed to screen and examine CTCs. The impacts of highly‐selective biomarkers and their features on the assembly and renovation of high‐tech immunolabeled and label‐free µ‐chips are discussed. Owing to significant impacts of multifunctional nanostructures on the performance of analytical µ‐chips based on engineering‐driven workflows, this review also focuses on their critical roles for screening CTCs benefited from the nanoscale physicochemical features. The advantages of integrated analytical µ‐chips are then identified and examined regarding their dominated sorting technologies. Furthermore, this review explores innovative technologies incorporating downstream cellular‐/molecular analysis into integrative analytical µ‐chips to pave the way for non‐invasive point‐of‐care diagnostics.
Microfluidics holds a great potential for an analytical examination of liquid biopsy and the development of point‐of‐care testing devices. This review overviews fundamentals and technological breakthroughs of immunolabeled and label‐free analytical microfluidic devices for screening and examining CTCs, describes engineering‐driven workflows for accelerating practical outcomes, and highlights future directions.
An acoustofluidic trap is used for accurate 3D cell proliferation and cell function analysis in levitation. The prototype trap can be integrated with any microscope setup, allowing continuous ...perfusion experiments with temperature and flow control under optical inspection. To describe the trap function, we present a mathematical and FEM-based COMSOL model for the acoustic mode that defines the nodal position of trapped objects in the spherical cavity aligned with the microscope field of view and depth of field. Continuous perfusion experiments were conducted in sterile conditions over 55 h with a K562 cell line, allowing for deterministic monitoring. The acoustofluidic platform allows for rational in vitro cell testing imitating in vivo conditions such as cell function tests or cell-cell interactions.
Molecular imprinting techniques were adapted to design a sensor for the human rhinovirus (HRV) and the foot-and-mouth disease virus (FMDV), which are two representatives of picornaviruses. Stamp ...imprinting procedures lead to patterned polyurethane layers that depict the geometrical features of the template virus, as confirmed by AFM for HRV. Quartz crystal microbalance (QCM) measurements show that the resulting layers incorporate the template viruses reversibly and lead to mass effects that are almost an order of magnitude higher than those of nonspecific adsorption. Thus, for example, the sensor yields a net frequency effect of −300 Hz when applying a virus suspension with a concentration of ∼100 μg/mL with an excellent signal-to-noise ratio. The cavities are not only selective to shape but also to surface chemistry: different HRV serotypes (HRV1A, HRV2, HRV14, and HRV16, respectively) can be distinguished with the sensor materials by a selectivity factor of 3, regardless of the group (major/minor) to which they belong. The same selectivity factor can be observed between HRV and FMDV. Hence, imprinting leads to an “artificial antibody” toward viruses, which does not only recognize their receptor binding sites, but rather detects the whole virus as an entity. Brunauer−Emmett−Teller (BET) studies allow simulation of the sensor characteristics and reveal the number of favorable binding sites in the coatings.
Display omitted
3D bioprinting is a tissue engineering approach using additive manufacturing to fabricate tissue equivalents for regenerative medicine or medical drug testing. For this purpose, ...biomaterials that provide the essential microenvironment to support the viability of cells integrated directly or seeded after printing are processed into three-dimensional (3D) structures. Compared to extrusion-based 3D printing, which is most commonly used in bioprinting, stereolithography (SLA) offers a higher printing resolution and faster processing speeds with a wide range of cell-friendly materials such as gelatin- or collagen-based hydrogels and SLA is, therefore, well suited to generate 3D tissue constructs.
While there have been numerous publications of conversions and upgrades for extrusion-based printers, this is not the case for state-of-the-art SLA technology in bioprinting. The high cost of proprietary printers severely limits teaching and research in SLA bioprinting. With mSLAb, we present a low-cost and open-source high-resolution 3D bioprinter based on masked SLA (mSLA). mSLAb is based on an entry-level (€350) desktop mSLA printer (Phrozen Sonic Mini 4 K), equipped with temperature control and humidification of the printing chamber to enable the processing of cell-friendly hydrogels. Additionally, the build platform was redesigned for easy sample handling and microscopic analysis of the printed constructs. All modifications were done with off-the-shelf hardware and in-house designed 3D printed components, printed with the same printer that was being modified.
We validated the system by printing macroscopic porous scaffolds as well as hollow channels from gelatin-based hydrogels as representative structures needed in tissue engineering.
The automated transport of cells can enable far-reaching cell culture research. However, to date, such automated transport has been achieved with large pump systems that often come with long fluidic ...connections and a large power consumption. Improvement is possible with space- and energy-efficient piezoelectric micro diaphragm pumps, though a precondition for a successful use is to enable transport with little to no mechanical stress on the cell suspension. This study evaluates the impact of the microfluidic transport of cells with the piezoelectric micro diaphragm pump developed by our group. It includes the investigation of different actuation signals. Therewith, we aim to achieve optimal fluidic performance while maximizing the cell viability. The investigation of fluidic properties proves a similar performance with a hybrid actuation signal that is a rectangular waveform with sinusoidal flanks, compared to the fluidically optimal rectangular actuation. The comparison of the cell transport with three actuation signals, sinusoidal, rectangular, and hybrid actuation shows that the hybrid actuation causes less damage than the rectangular actuation. With a 5% reduction of the cell viability it causes similar strain to the transport with sinusoidal actuation. Piezoelectric micro diaphragm pumps with the fluidically efficient hybrid signal actuation are therefore an interesting option for integrable microfluidic workflows.