Weyl fermions have been observed as three-dimensional, gapless topological excitations in weakly correlated, inversion-symmetry-breaking semimetals. However, their realization in spontaneously ...time-reversal-symmetry-breaking phases of strongly correlated materials has so far remained hypothetical. Here, we report experimental evidence for magnetic Weyl fermions in Mn
Sn, a non-collinear antiferromagnet that exhibits a large anomalous Hall effect, even at room temperature. Detailed comparison between angle-resolved photoemission spectroscopy (ARPES) measurements and density functional theory (DFT) calculations reveals significant bandwidth renormalization and damping effects due to the strong correlation among Mn 3d electrons. Magnetotransport measurements provide strong evidence for the chiral anomaly of Weyl fermions-namely, the emergence of positive magnetoconductance only in the presence of parallel electric and magnetic fields. Since weak magnetic fields (approximately 10 mT) are adequate to control the distribution of Weyl points and the large fictitious fields (equivalent to approximately a few hundred T) produced by them in momentum space, our discovery lays the foundation for a new field of science and technology involving the magnetic Weyl excitations of strongly correlated electron systems such as Mn
Sn.
The present study evaluated the color-matching ability of a structural colored resin composite to compare it with resin composites employing pigments.
A structural colored resin composite (Omnichroma ...OMC), a supranano-filled resin composite (Estelite ∑ Quick ELQ), and a nano-filled resin composite (Filtek Supreme Ultra FSU) were used. Each resin composite was packed into a Teflon mold and pressed down with a clear strip under a glass slide. The specimens were light irradiated through the slide with a light-emitting diode curing unit. The thickness of the specimens (n=6) was measured with a digital caliper before being transferred to distilled water and stored at 37°C for 24 hours. The measurements of the optical characteristics of the specimens on a black-and-white background were performed using a spectrophotometer. D65 (CIE D65) was used as a light source for the spectrophotometer. Measurements were repeated three times for each specimen under each color-measurement condition, and average values for three same-shade specimens were calculated. One-way analysis of variance and Tukey post hoc tests were used (α=0.05). To determine its ability to match the color of artificial teeth, each shade of resin composite was placed in a cavity before performing color measurements. Using a spectrophotometer (CMS-35F S/C) with a flexible sensor, L*, a*, and b* values were obtained.
The spectral reflectance curve of OMC showed that it reflected light wavelengths from 430-700 nm regardless of the background color and thickness of the specimens. The percentage of reflectance of ELQ decreased near wavelengths of 550-580 nm. Regarding the influence of background color on CIE L*, a*, b* values, the L* level showed significantly higher values for all tested materials with white backgrounds, and OMC was most affected by the difference in background color. However, a* values of ELQ and FSU were significantly higher with a black background than with a white background, and OMC showed a significantly higher value with a white background than with a black background. The b* values were higher with a white background than with a black background and were significantly higher for all three products, and these tendencies were much greater for ELQ and FSU.
The ability of OMC to match the color of artificial teeth showed acceptable color compatibility, regardless of the shade of the artificial teeth and the depth of the cavity. However, ELQ and FSU showed reduced color compatibility, especially for a cavity depth of 3.0 mm. Excellent color matching ability was confirmed for the structural colored resin composite OMC, resulting in reduced color differences and therefore improving the esthetic appearance of the restoration, simplifying shade matching, and compensating for any color mismatch.
We attempted to determine the effect of universal adhesive application time on dentin bond performance in different etching modes based on shear bond strength (SBS) tests and surface free energy ...(SFE) measurements. The five universal adhesives used were Adhese Universal (AU), Clearfil Universal Bond Quick (CQ), G-Premio Bond (GP), Scotchbond Universal (SU), and Tokuyama Universal Bond (TU). Bovine dentin specimens were divided into four groups of 10 for each adhesive. SBS and SFE were determined after applying the following surface treatments: 1) self-etch (SE) mode with immediate air blowing after adhesive application (IA treatment), 2) SE mode with prolonged application time (PA treatment), 3) etch-and-rinse (ER) mode with IA treatment, and 4) ER mode with PA treatment. Bonded specimens were subjected to SBS testing. The SFE of adhesive-treated dentin surfaces was measured after rinsing with acetone and water. Three-way analysis of variance revealed that dentin SBS values (
<0.001) were significantly influenced by the factors of adhesive type and application duration, but the factor of pre-etching was not significant (
0.985). The manufacturer's instructions require longer application times for AU and SU, which showed significantly lower SBS values in IA than in PA treatment in both etching modes. However, the difference in the other adhesives was not significant between the IA and PA treatments in either etching mode. The total SFE (γ
) was dependent on the adhesive and etching mode. The γ
value of the initial group (SiC paper ground group) at baseline was 69.5 (mN·m
) and that of the pre-etching group at baseline was 30.6 (mN·m
). For all the adhesives, γ
in SE mode showed significantly higher values than in ER mode, regardless of the application time. In SE mode, almost all universal adhesives tested showed lower γ
values in PA treatment than in IA treatment. For ER mode, all the adhesives showed significantly higher γ
values than those of the pre-etching baseline, regardless of the application time. Most adhesives did not show any significant differences in γ
values between IA and PA treatments, regardless of etching mode.
Frustrated magnetic materials, in which local conditions for energy minimization are incompatible because of the lattice structure, can remain disordered to the lowest temperatures. Such is the case ...for Ba₃CuSb₂O₉, which is magnetically anisotropic at the atomic scale but curiously isotropie on mesoscopic length and time scales. We find that the frustration of Wannier's Ising model on the triangular lattice is imprinted in a nanostructured honeycomb lattice of Cu⁺ ions that resists a coherent static Jahn-Teller distortion. The resulting two-dimensional random-bond spin-1/2 system on the honeycomb lattice has a broad spectrum of spin-dimer-like excitations and low-energy spin degrees of freedom that retain overall hexagonal symmetry.
We have searched for exotic neutrino-electron interactions that could be produced by a neutrino millicharge, by a neutrino magnetic moment, or by dark photons using solar neutrinos in the XMASS-I ...liquid xenon detector. We observed no significant signals in 711 days of data. We obtain an upper limit for neutrino millicharge of 5.4×10−12e at 90% confidence level assuming all three species of neutrino have common millicharge. We also set flavor-dependent limits assuming the respective neutrino flavor is the only one carrying a millicharge, 7.3×10−12e for νe, 1.1×10−11e for νμ, and 1.1×10−11e for ντ. These limits are the most stringent yet obtained from direct measurements. We also obtain an upper limit for the neutrino magnetic moment of 1.8×10−10 Bohr magnetons. In addition, we obtain upper limits for the coupling constant of dark photons in the U(1)B−L model of 1.3×10−6 if the dark photon mass is 1×10−3 MeV/c2, and 8.8×10−5 if it is 10 MeV/c2.
Objective
Fetal fractional limb volume has been proposed as a useful measure for quantifying fetal soft tissue development. The aim of this study was to investigate the growth of fractional arm ...volume (AVol) and fractional thigh volume (TVol) of fetuses with maternal gestational diabetes (GDM) compared with those of fetuses with normal glucose tolerance (NGT). We hypothesised fetal fractional limb volume would be larger in the GDM group than in the NGT group in late gestation.
Design
Exploratory observational study.
Setting
Saitama Municipal Hospital.
Sample
A total of 165 (125 NGT and 40 GDM) singleton Japanese pregnant women.
Methods
AVol and TVol were assessed between 20 and 37 weeks’ gestation as cylindrical limb volumes based on 50% of the fetal humeral or femoral diaphysis length. Women were diagnosed as GDM based on the criteria of the Japan Society of Obstetrics and Gynecology.
Main outcome measures
AVol and TVol were compared between women with NGT and those with GDM at each gestational age period (2‐week intervals from 20 to 37 weeks’ gestation).
Results
Overall, 287 ultrasound scans were performed (NGT group, 205 scans; GDM group, 82 scans). There was no significant difference of AVol between the groups before 32 weeks’ gestation. AVol was significantly larger in the GDM group than in the NGT group after 32 weeks’ gestation (P < 0.05). TVol was not statistically different between the groups across gestation.
Conclusions
Detection of variations in fetal AVol may provide greater insight into understanding the origins of altered fetal body proportion in GDM.
Tweetable
AVol, but not TVol, is significantly larger in fetuses with GDM than in those with NGT after 32 weeks’ gestation.
Tweetable
AVol, but not TVol, is significantly larger in fetuses with GDM than in those with NGT after 32 weeks’ gestation.
The purpose of this study was to determine the influence of finishing and polishing methods on surface properties of bulk-fill resin composites through surface roughness (
) and surface free energy ...(SFE) measurements, and scanning electron microscopy (SEM) observations. Three bulk-fill resin composites, Tetric EvoCeram Bulk Fill (TB), Filtek Bulk Fill (FB), and Filtek Bulk Fill Flowable Restorative (FF), and two conventional resin composites, Clearfil AP-X (AP) and Estelite ∑ Quick (EQ) were used. Seventy cured specimens of each resin composite were prepared and divided into seven groups of 10 specimens.
, SFE measurements, and SEM observations were conducted after finishing and polishing procedures. Three groups of specimens were finished with a fine grit diamond bur (FDB), and three with a tungsten carbide bur (CBB). After finishing, one group from each type of finishing was polished with aluminum oxide flexible disks (SSD) and one group from each type of finishing was polished with diamond particles embedded in a silicone point (CMP). A baseline group of samples that were neither finished nor polished after removing the translucent strips from the surface was examined. Although the baseline group showed significantly lower
values than the other groups, most resin composites showed lower
values with CBB+SSD than with the other finishing and polishing groups. Among the tested resin composites, EQ showed significantly lower
values than the other resin composites, regardless of the finishing and polishing methods. On the other hand, AP showed significantly higher
values than the other resin composites in all finishing and polishing groups, apart from FB with FDB. For the finished specimens, most resin composites showed higher SFE values with CBB than with FDB. For the polished specimens, all the tested resin composites with CMP showed lower γ
values than those with SSD, regardless of the finishing method. The baseline groups of TB and FB showed significantly lower SFE values than the other finished and polished groups. In the SEM observations, all the examined resin composites showed rougher surfaces after finishing with FDB than with CBB. However, when comparing the different polishing methods (CMP and SSD), surface smoothness appeared to be material dependent.
We report a thorough study of InGaN quantum wells spatially modified by varying the local misorientation of the GaN substrate prior to the epitaxial growth of the structure. More than 25 nm shift of ...emission wavelength was obtained, which is attributed to indium content changes in the quantum wells. Such an active region is promising for broadening of the emission spectrum of (In,Al,Ga)N superluminescent diodes. We observed that the light intensity changes with misorientation, being stable around 0.5° to 2° and decreasing above 2°. This relation can be used as a base for future device designing.
The objectives of this study were as follows: 1) to compare the metabolic activities of endogenous compounds and their effects on dopamine formation and hydroxylation of steroid hormones, mediated by ...human cytochrome P450 (CYP), including CYP2C9.1 and CYP2C19, as well as the variants CYP2C9.2 (Arg144Cys) and CYP2C9.3 (Ile359Leu); and 2) to assess the effects of steroid hormones on the activities of CYP2C9.1, CYP2C9.2, and CYP2C19 to estimate the contribution of the CYP2C subfamily to metabolism and drug-drug interactions of endogenous compounds. Dopamine formation from
-tyramine and 6β- and 21- (for progesterone) hydroxylation of testosterone, cortisol, and progesterone by CYP2C9 variants, CYP2C19, CYP2D6, and CYP3A4 were determined using HPLC. The effects of steroid hormones such as testosterone, cortisol, and progesterone on tolbutamide methyl hydroxylation mediated by CYP2C subfamily members were investigated. Only CYP2D6 catalyzed dopamine formation. The 6β-hydroxylation activities of testosterone, cortisol, and progesterone catalyzed by CYP2C9 variants and CYP2D6 were less than 5% of those by CYP3A4. Although cortisol did not inhibit tolbutamide methyl hydroxylation catalyzed by CYP2C9.1, CYP2C9.2, or CYP2C19 and testosterone did not inhibit CYP2C19 activity, the reactions catalyzed by CY2C9.1 and CYP2C9.2 were inhibited by testosterone. The inhibition of progesterone by CYP2C19 was stronger than that by CYP2C9.1 and CYP2C9.2. CYP2C9.1 and CYP2C19 noncompetitively and competitively inhibited tolbutamide methyl hydroxylation with inhibition constants of 43.2 μM and 1.03 μM, respectively. Clinical interactions among endogenous compounds would vary within the CYP2C subfamily, although the contribution of the CYP2C subfamily may be of minor importance for dopamine formation and the detoxification (6β-hydroxylation) of endogenous steroid hormones.
PDF
