We present spectrally resolved optical and microphysical properties of
western Canadian wildfire smoke observed in a tropospheric layer from
5–6.5 km height and in a stratospheric layer from 15–16 km ...height during
a record-breaking smoke event on 22 August 2017. Three polarization/Raman
lidars were run at the European Aerosol Research Lidar Network (EARLINET)
station of Leipzig, Germany, after sunset on 22 August. For the first time,
the linear depolarization ratio and extinction-to-backscatter ratio (lidar
ratio) of aged smoke particles were measured at all three important lidar
wavelengths of 355, 532, and 1064 nm. Very different particle depolarization
ratios were found in the troposphere and in the stratosphere. The obviously
compact and spherical tropospheric smoke particles caused almost no
depolarization of backscattered laser radiation at all three wavelengths
(<3 %), whereas the dry irregularly shaped soot particles in the
stratosphere lead to high depolarization ratios of 22 % at 355 nm and
18 % at 532 nm and a comparably low value of 4 % at 1064 nm. The lidar
ratios were 40–45 sr (355 nm), 65–80 sr (532 nm), and 80–95 sr
(1064 nm) in both the tropospheric and stratospheric smoke layers
indicating similar scattering and absorption properties. The strong
wavelength dependence of the stratospheric depolarization ratio was probably
caused by the absence of a particle coarse mode (particle mode consisting of
particles with radius >500 nm). The stratospheric smoke particles
formed a pronounced accumulation mode (in terms of particle volume or mass)
centered at a particle radius of 350–400 nm. The effective particle radius
was 0.32 µm. The tropospheric smoke particles were much smaller
(effective radius of 0.17 µm). Mass concentrations were of the
order of 5.5 µg m−3 (tropospheric layer) and
40 µg m−3 (stratospheric layer) in the night of
22 August 2017. The single scattering albedo of the stratospheric particles
was estimated to be 0.74, 0.8, and 0.83 at 355, 532, and 1064 nm,
respectively.
We present particle optical properties of stratospheric smoke layers observed with multiwavelength polarization Raman lidar over Punta Arenas (53.2∘ S, 70.9∘ W), Chile, at the southernmost tip of ...South America in January 2020. The smoke originated from the record-breaking bushfires in Australia. The stratospheric aerosol optical thickness reached values up to 0.85 at 532 nm in mid-January 2020. The main goal of this rapid communication letter is to provide first stratospheric measurements of smoke extinction-to-backscatter ratios (lidar ratios) and particle linear depolarization ratios at 355 and 532 nm wavelengths. These aerosol parameters are important input parameters in the analysis of spaceborne CALIPSO and Aeolus lidar observations of the Australian smoke spreading over large parts of the Southern Hemisphere in January and February 2020 up to heights of around 30 km. Lidar and depolarization ratios, simultaneously measured at 355 and 532 nm, are of key importance regarding the homogenization of the overall Aeolus (355 nm wavelength) and CALIPSO (532 nm wavelength) lidar data sets documenting the spread of the smoke and the decay of the stratospheric perturbation, which will be observable over the entire year of 2020. We found typical values and spectral dependencies of the lidar ratio and linear depolarization ratio for aged stratospheric smoke. At 355 nm, the lidar ratio and depolarization ratio ranged from 53 to 97 sr (mean 71 sr) and 0.2 to 0.26 (mean 0.23), respectively. At 532 nm, the lidar ratios were higher (75–112 sr, mean 97 sr) and the depolarization ratios were lower with values of 0.14–0.22 (mean 0.18). The determined depolarization ratios for aged Australian smoke are in very good agreement with respective ones for aged Canadian smoke, observed with lidar in stratospheric smoke layers over central Europe in the summer of 2017. The much higher 532 nm lidar ratios, however, indicate stronger absorption by the Australian smoke particles.
In this paper, we present long-term observations of the multiwavelength Raman lidar PollyXT conducted in the framework of the DACAPO-PESO campaign. Regardless of the relatively clean atmosphere in ...the southern mid-latitude oceans region, we regularly observed events of long-range transported smoke, originating either from regional sources in South America or from Australia. Two case studies will be discussed, both identified as smoke events that occurred on 5 February 2019 and 11 March 2019. For the first case considered, the lofted smoke layer was located at an altitude between 1.0 and 4.2 km, and apart from the predominance of smoke particles, particle linear depolarization values indicated the presence of dust particles. Mean lidar ratio values at 355 and 532 nm were 49 ± 12 and 24 ± 18 sr respectively, while the mean particle linear depolarization was 7.6 ± 3.6% at 532 nm. The advection of smoke and dust particles above Punta Arenas affected significantly the available cloud condensation nuclei (CCN) and ice nucleating particles (INP) in the lower troposphere, and effectively triggered the ice crystal formation processes. Regarding the second case, the thin smoke layers were observed at altitudes 5.5–7.0, 9.0 and 11.0 km. The particle linear depolarization ratio at 532 nm increased rapidly with height, starting from 2% for the lowest two layers and increasing up to 9.5% for the highest layer, indicating the possible presence of non-spherical coated soot aggregates. INP activation was effectively facilitated. The long-term analysis of the one year of observations showed that tropospheric smoke advection over Punta Arenas occurred 16 times (lasting from 1 to 17 h), regularly distributed over the period and with high potential to influence cloud formation in the otherwise pristine environment of the region.
Simultaneous observations of a polarized micro-pulse lidar (P-MPL) system and two reference European Aerosol Research Lidar Network lidars running at the Leipzig site Germany, 51.4∘ N, 12.4∘ E; 125 m ...a.s.l.) were performed during a comprehensive 2-month field intercomparison campaign in summer 2019. An experimental assessment regarding both the overlap (OVP) correction of the P-MPL signal profiles and the volume linear depolarization ratio (VLDR)
analysis, together with its impact on the retrieval of the aerosol optical
properties, is achieved; the experimental procedure used is also described.
The optimal lidar-specific OVP function is experimentally determined,
highlighting that the one delivered by the P-MPL manufacturer cannot be used long. Among the OVP functions examined, the averaged function between those
obtained from the comparison of the P-MPL observations with those of the
other two reference lidars seems to be the best proxy at both near- and
far-field ranges. In addition, the impact of the OVP function on the
accuracy of the retrieved profiles of the total particle backscatter
coefficient (PBC) and the particle linear depolarization ratio (PLDR) is
examined. The VLDR profile is obtained and compared with that derived from the reference lidar, showing that it needs to be corrected by a small offset value with good accuracy. Once P-MPL measurements are optimally (OVP, VLDR) corrected, both the PBC and PLDR profiles can be accurately derived and are in good agreement with reference aerosol retrievals. Overall, as a
systematic requirement for lidar systems, an adequate OVP function
determination and VLDR testing analysis needs to be performed on a
regular basis to correct the P-MPL measurements in order to derive suitable
aerosol products. A dust event observed in Leipzig in June 2019 is used
for illustration.
In this work we evaluate the possibilities to assess aerosol-cloud interactions in short time scales (2 min.) on an observational base. Retrievals of the cloud effective radius and number ...concentration in a liquid-water cloud by using the multiple scattering technique Dual-FOV Polarization lidar, together with the aerosol extinction coefficient in the boundary layer has shown a correspondence between the aerosol and cloud properties in the 6 hours case presented, obtaining a value of
ACI
N
= 0.76 ± 0.29, which corroborates the potential of lidar observations to study the relation between aerosols and clouds on small scales.
Since 2010, the Raman dual-FOV lidar system permits the retrieval of microphysical properties of liquid-water clouds during nighttime. A new robust lidar depolarization approach was recently ...introduced, which permits the retrieval of these properties as well, with high temporal resolution and during daytime. To implement this approach, the lidar system was upgraded, by adding a three channel depolarization receiver. The first preliminary retrieval results and a comparison between both methods is presented.
Canadian wildfire smoke was detected in the troposphere and lower stratosphere over Europe in August and September 2017. Lidar measurements from various stations of the European Aerosol Research ...Lidar Network (EARLINET) observed the stratospheric smoke layer. Triple-wavelength (355, 532, and 1064 nm) lidar measurements of the depolarization and the lidar ratio are reported from Leipzig, Germany. The particle linear depolarization ratio of the wildfire smoke in the stratosphere had an exceptional strong wavelength dependence reaching from 0.22 at 355 nm, to 0.18 at 532 nm, and 0.04 at 1064 nm. The lidar ratio increased with wavelength from 40±16 sr at 355 nm, to 66±12 sr at 532 nm, and 92±27 sr at 1064 nm. The development of the stratospheric smoke plume over several months was studied by long-term lidar measurements in Cyprus. The stratospheric smoke layers increased in altitude up to 24 km height.
We present retrievals of tropospheric and stratospheric height profiles of particle mass, volume, surface area, and number concentrations in the case of wildfire smoke layers as well as estimates of ...smoke-related cloud condensation nuclei (CCN) and ice-nucleating particle (INP) concentrations from backscatter lidar measurements on the ground and in space. Conversion factors used to convert the optical measurements into microphysical properties play a central role in the data analysis, in addition to estimates of the smoke extinction-to-backscatter ratios required to obtain smoke extinction coefficients. The set of needed conversion parameters for wildfire smoke is derived from AERONET observations of major smoke events, e.g., in western Canada in August 2017, California in September 2020, and southeastern Australia in January–February 2020 as well as from AERONET long-term observations of smoke in the Amazon region, southern Africa, and Southeast Asia. The new smoke analysis scheme is applied to CALIPSO observations of tropospheric smoke plumes over the United States in September 2020 and to ground-based lidar observation in Punta Arenas, in southern Chile, in aged Australian smoke layers in the stratosphere in January 2020. These case studies show the potential of spaceborne and ground-based lidars to document large-scale and long-lasting wildfire smoke events in detail and thus to provide valuable information for climate, cloud, and air chemistry modeling efforts performed to investigate the role of wildfire smoke in the atmospheric system.
An advanced multiwavelength polarization Raman lidar was operated aboard the icebreaker Polarstern during the MOSAiC (Multidisciplinary drifting Observatory for the Study of Arctic Climate) ...expedition to continuously monitor aerosol and cloud layers in the central Arctic up to 30 km height. The expedition lasted from September 2019 to October 2020 and measurements were mostly taken between 85 and 88.5∘ N. The lidar was integrated into a complex remote-sensing infrastructure aboard the Polarstern.
In this article, novel lidar techniques, innovative concepts to study aerosol–cloud interaction in the Arctic, and unique MOSAiC findings will be presented.
The highlight of the lidar measurements was the detection of a 10 km deep wildfire smoke layer over the North Pole region between 7–8 km and 17–18 km height with an aerosol optical thickness (AOT) at 532 nm of around 0.1 (in October–November 2019) and 0.05 from December to March. The dual-wavelength Raman lidar technique allowed us to unambiguously identify smoke as the dominating aerosol type in the aerosol layer in the upper troposphere and lower stratosphere (UTLS). An additional contribution to the 532 nm AOT by volcanic sulfate aerosol (Raikoke eruption) was estimated to always be lower than 15 %. The optical and microphysical properties of the UTLS smoke layer are presented in an accompanying paper (Ohneiser et al., 2021).
This smoke event offered the unique opportunity to study the influence of organic aerosol particles (serving as ice-nucleating particles, INPs) on cirrus formation in the upper troposphere. An example of a closure study is presented to explain our concept of investigating aerosol–cloud interaction in this field. The smoke particles were obviously able to control the evolution of the cirrus system and caused low ice crystal number concentration. After the discussion of two typical Arctic haze events, we present a case study of the evolution of a long-lasting mixed-phase cloud layer embedded in Arctic haze in the free troposphere. The recently introduced dual-field-of-view polarization lidar technique was applied, for the first time, to mixed-phase cloud observations in order to determine the microphysical properties of the water droplets. The mixed-phase cloud closure experiment (based on combined lidar and radar observations) indicated that the observed aerosol levels controlled the number concentrations of nucleated droplets and ice crystals.
In a series of two articles, a novel, robust, and practicable lidar approach is presented that allows us to derive microphysical properties of liquid-water clouds (cloud extinction coefficient, ...droplet effective radius, liquid-water content, cloud droplet number concentration) at a height of 50–100 m above the cloud base. The temporal resolution of the observations is on the order of 30–120 s. Together with the aerosol information (aerosol extinction coefficients, cloud condensation nucleus concentration) below the cloud layer, obtained with the same lidar, in-depth aerosol–cloud interaction studies can be performed. The theoretical background and the methodology of the new cloud lidar technique is outlined in this article (Part 1), and measurement applications are presented in a companion publication (Part 2) (Jimenez et al., 2020a). The novel cloud retrieval technique is based on lidar observations of the volume linear depolarization ratio at two different receiver fields of view (FOVs). Extensive simulations of lidar returns in the multiple scattering regime were conducted to investigate the capabilities of a dual-FOV polarization lidar to measure cloud properties and to quantify the information content in the measured depolarization features regarding the basic retrieval parameters (cloud extinction coefficient, droplet effective radius). Key simulation results and the overall data analysis scheme developed to obtain the aerosol and cloud products are presented.
PDF
