Low-molecular-weight poly(allylamine) is prepared via free-radical polymerization, and the resulting polymer is impregnated into mesocellular silica foams at different amine loadings. The resulting ...poly(allylamine)–silica composites are demonstrated as effective adsorbents for the extraction of carbon dioxide from dilute (simulated flue gas) and ultradilute (simulated ambient air) gas streams. The composite adsorbents are shown to have comparable adsorption capacities to more-conventional poly(ethyleneimine)–silica adsorbents. Potential advantages of poly(allylamine)-derived adsorbents are discussed.
Carbon dioxide adsorption from a simulated flue gas stream was successfully performed with a hyperbranched aminosilica (HAS) material. The HAS was synthesized by a one-step reaction, spontaneous ...aziridine ring-opening polymerization off of surface silanols, to form a 32 wt % organic/inorganic hybrid material. The adsorption measurements were performed in a fixed-bed flow reactor using humidified CO2. The advantage of this adsorbent over previously reported adsorbents is the stability of the organic groups covalently bound to the silica support compared to those made by physisorbed methods. Furthermore, a large CO2 capacity (∼3 mmol CO2/g adsorbent) associated with the high loading of amines was observed.
Background Paro and other robot animals can improve wellbeing for older adults and people with dementia, through reducing depression, agitation and medication use. However, nursing and care staff we ...contacted expressed infection control concerns. Little related research has been published. We assessed (i) how microbiologically contaminated robot animals become during use by older people within a care home and (ii) efficacy of a cleaning procedure. Methods This study had two stages. In stage one we assessed microbial load on eight robot animals after interaction with four care home residents, and again following cleaning by a researcher. Robot animals provided a range of shell-types, including fur, soft plastic, and solid plastic. Stage two involved a similar process with two robot animals, but a care staff member conducted cleaning. The cleaning process involved spraying with anti-bacterial product, brushing fur-type shells, followed by vigorous top-to-tail cleaning with anti-bacterial wipes on all shell types. Two samples were taken from each of eight robots in stage one and two robots in stage two (20 samples total). Samples were collected using contact plate stamping and evaluated using aerobic colony count and identification (gram stain, colony morphology, coagulase agglutination). Colony counts were measured by colony forming units per square centimetre (CFU/cm.sup.2). Results Most robots acquired microbial loads well above an acceptable threshold of 2.5 CFU/cm.sup.2 following use. The bacteria identified were micrococcus species, coagulase negative staphylococcus, diptheriods, aerobic spore bearers, and staphylococcus aureus, all of which carry risk for human health. For all devices the CFU/cm.sup.2 reduced to well within accepted limits following cleaning by both researcher and care staff member. Conclusions Companion robots will acquire significant levels of bacteria during normal use. The simple cleaning procedure detailed in this study reduced microbial load to acceptable levels in controlled experiments. Further work is needed in the field and to check the impact on the transmission of viruses.
Well matched: Submicrometer‐sized metal–organic framework (MOF) crystals (ZIF‐90) were synthesized by a nonsolvent‐induced crystallization technique and incorporated in mixed‐matrix gas‐separation ...membranes. ZIF‐90/6FDA‐DAM membranes (empty pink circle; beyond the upper bound for polymer membranes) show unprecedented high performance for CO2/CH4 separation by a MOF‐based membrane. The key is the combination of the highly selective MOF and a highly permeable polymer.
A series of aminopropyl-functionalized silicas containing of primary, secondary, or tertiary amines is fabricated via silane-grafting on mesoporous SBA-15 silica and the utility of each material in ...the adsorption of volatile aldehydes from air is systematically assessed. A particular emphasis is placed on low-molecular-weight aldehydes such as formaldehyde and acetaldehyde, which are highly problematic volatile organic compound (VOC) pollutants. The adsorption tests demonstrate that the aminosilica materials with primary amines most effectively adsorbed formaldehyde with an adsorption capacity of 1.4 mmolHCHO g–1, whereas the aminosilica containing secondary amines showed lower adsorption capacity (0.80 mmolHCHO g–1) and the aminosilica containing tertiary amines adsorbed a negligible amount of formaldehyde. The primary amine containing silica also successfully abated higher aldehyde VOC pollutants, including acetaldehyde, hexanal, and benzaldehyde, by effectively adsorbing them. The adsorption mechanism is investigated by 13C CP MAS solid-state NMR and FT-Raman spectroscopy, and it is demonstrated that the aldehydes are chemically attached to the surface of aminosilica in the form of imines and hemiaminals. The high aldehyde adsorption capacities of the primary aminosilicas in this study demonstrate the utility of amine-functionalized silica materials for reduction of gaseous aldehydes.
Carbon management by a means of CO2 capture from large stationary sources such as coal-fired power plants or from ambient air is a significant global issue. In the context of steam-stripping as a ...regeneration process for solid CO2 adsorbents, new adsorbent materials robust enough for direct contact with low temperature steam are needed. Here, mesoporous γ-alumina-supported poly(ethyleneimine) composite materials are prepared and evaluated as effective CO2 adsorbents, using dilute CO2 streams such as simulated flue gas (10% CO2) and ultradilute streams such as simulated ambient air (400 ppm CO2). In comparison to the silica-supported amine adsorbents typically utilized for CO2 capture applications, the alumina-supported amine adsorbents give better performance in terms of both capture capacity and amine efficiency, in particular, at ambient air conditions. In addition, the alumina-supported amines are stable over short multicycle temperature swing tests and, more importantly, appear to be more robust than the silica-based counterparts upon direct contact with steam. Thus, the resulting alumina-supported amines are suggested to be promising new materials for CO2 capture processes equipped with steam-stripping regeneration, especially from ultradilute gas streams.
The measurement of isosteric heats of adsorption of silica supported amine materials in the low pressure range (0–0.1 bar) is critical for understanding the interactions between CO2 and amine sites ...at low coverage and hence to the development of efficient amine adsorbents for CO2 capture from flue gas and ambient air. Heats of adsorption for an array of silica-supported amine materials are experimentally measured at low coverage using a Calvet calorimeter equipped with a customized dosing manifold. In a series of 3-aminopropyl-functionalized silica materials, higher amine densities resulted in higher isosteric heats of adsorption, clearly showing that the density/proximity of amine sites can influence the amine efficiency of adsorbents. In a series of materials with fixed amine loading but different amine types, strongly basic primary and secondary amine materials are shown to have essentially identical heats of adsorption near 90 kJ/mol. However, the adsorption uptakes vary substantially as a function of CO2 partial pressure for different primary and secondary amines, demonstrating that entropic contributions to adsorption may play a key role in adsorption at secondary amine sites, making adsorption at these sites less efficient at the low coverages that are important to the direct capture of CO2 from ambient air. Thus, while primary amines are confirmed to be the most effective amine types for CO2 capture from ambient air, this is not due to enhanced enthalpic contributions associated with primary amines over secondary amines, but may be due to unfavorable entropic factors associated with organization of the second alkyl chain on the secondary amine during CO2 adsorption. Given this hypothesis, favorable entropic factors may be the main reason primary amine based adsorbents are more effective under air capture conditions.
Oxidative dehydrogenation of propane to propylene can be achieved using conventional, oxygen-assisted dehydrogenation of propane (O2–ODHP) or via the use of soft oxidants, such as CO2, N2O, ...S-containing compounds, and halogens/halides. The major roles of soft oxidants include inhibiting overoxidation and improving propylene selectivity, which are considered to be current challenges in O2-assisted dehydrogenation. For both CO2– and N2O–ODHP reactions, significant efforts have been devoted to developing redox-active (e.g., chromium, vanadate, iron, etc.), nonredox-type main group metal oxide (e.g., group IIIA, gallium), and other transition metal/metal oxide catalysts (e.g., molybdenum, palladium platinum, rhodium, ruthenium, etc.), as well as zeolite-based catalysts with adjustable acid–base properties, unique pore structures, and topologies. Metal sulfides have shown promising performance in DHP, whereas the development of suitable catalysts has lagged for SO2- or S-assisted ODHP. Recently, significant efforts have been focused on homogeneous and heterogeneous ODHP using halogens (e.g., Br2, I2, Cl2, etc.) and hydrogen halides (e.g., HCl and HBr) for the development of facile processes for C3H6 synthesis. This Review aims to provide a critical, comprehensive review of recent advances in oxidative dehydrogenation of propane with these soft oxidants, particularly highlighting the current state of understanding of the following factors: (i) relationships between composition, structure, and catalytic performance, (ii) effects of the support, acidity, and promoters, (iii) reaction pathway and mechanistic insights, and (iv) the various roles of soft oxidants. Theoretical and computational insights toward understanding reaction mechanisms and catalyst design principles are also covered. Future research opportunities are discussed in terms of catalyst design and synthesis, deactivation and regeneration, reaction mechanisms, and alternative approaches.
PDF
