Summary
Plant protoplasts are useful for assessing the efficiency of clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR‐associated protein 9 (Cas9) mutagenesis. We improved the ...process of protoplast isolation and transfection of several plant species. We also developed a method to isolate and regenerate single mutagenized Nicotianna tabacum protoplasts into mature plants. Following transfection of protoplasts with constructs encoding Cas9 and sgRNAs, target gene DNA could be amplified for further analysis to determine mutagenesis efficiency. We investigated N. tabacum protoplasts and derived regenerated plants for targeted mutagenesis of the phytoene desaturase (NtPDS) gene. Genotyping of albino regenerants indicated that all four NtPDS alleles were mutated in amphidiploid tobacco, and no Cas9 DNA could be detected in most regenerated plants.
The field of mesoporous metal nanoarchitectonics offers several advantages which cannot be found elsewhere. These materials have been showcasing impressive enhancements of their electrochemical ...properties for further implementation, compared to their micro‐ and macroporous counterparts. Since the last few decades, various methods have been developed to achieve narrow pore size distribution with a tunable porosity and particle morphology. While hard templates offer a reliable and intuitive approach to synthesize mesoporous metals, the complexity of the technique and the use of harmful chemicals pushed several research groups to focus in other directions. For example, soft templates (e.g., lyotropic crystals, micelles assemblies) and solution phase methods (requiring to control reduction reactions) offer more and more possibilities in terms of available compositions and morphologies. Indeed, various metal (Pt, Pd, Au, Ru, etc.) can now be synthesized as dendritic, core@shell, hollow or polyhedral nanoparticles, with single‐ or multicomponents, alloyed or not, with unprecedented electrochemical activity.
Mesoporous metals are normally synthesized by templating methods (hard or soft), while dendritic nanostructures are instead fabricated by wet chemical methods. To date, a broad spectrum of nanoporous metals (including both microporous and mesoporous metals) with different sizes and shapes has been successfully prepared under various conditions. Recent progress relating to this emerging field is reviewed.
Phytochromes function as thermosensors in Arabidopsis Jung, Jae-Hoon; Domijan, Mirela; Klose, Cornelia ...
Science (American Association for the Advancement of Science),
11/2016, Letnik:
354, Številka:
6314
Journal Article
Recenzirano
Odprti dostop
Plants are responsive to temperature, and some species can distinguish differences of 1°C. In Arabidopsis, warmer temperature accelerates flowering and increases elongation growth ...(thermomorphogenesis). However, the mechanisms of temperature perception are largely unknown. We describe a major thermosensory role for the phytochromes (red light receptors) during the night. Phytochrome null plants display a constitutive warm-temperature response, and consistent with this, we show in this background that the warm-temperature transcriptome becomes derepressed at low temperatures. We found that phytochrome B (phyB) directly associates with the promoters of key target genes in a temperature-dependent manner. The rate of phyB inactivation is proportional to temperature in the dark, enabling phytochromes to function as thermal timers that integrate temperature information over the course of the night.
Air pollution, particularly for toxic and harmful compounds to humans and the environment, has aroused increasing public concerns. Among air pollutants, volatile organic compounds (VOCs) are the main ...sources of air pollution. Many attempts have been made to control VOCs using catalysts, plasma, photolysis, and adsorption. Among them, oxidative catalysis by noble metals or transition metal oxides is considered one of the most feasible and effective methods to control VOCs. This paper reviews the experimental achievements on the abatement of VOCs using noble metals, transition metals and modified metal oxide catalysts. Although the catalytic degradation of VOCs appears to be feasible, there are unavoidable problems when only catalysis treatments are applied to the field. Therefore, catalysts including hybrid processes are developed to improve the removal efficiency of VOCs. This review addresses new hybrid treatments to remove VOCs using catalysts, including hybrid treatment combined with plasma, photolysis, and adsorption. The mechanism of the oxidation of VOCs by catalysts is explained by adsorption-desorption principles, such as the Langmuir-Hinshelwood, Eley-Rideal, and Mars-van-Krevelen mechanisms. A π-backbonding interaction between unsaturated compounds and transition metals is introduced to better understand the mechanism of VOC removals. Finally, several factors affecting the catalytic activities, such as support, component ratio, preparation method, metal loading, and deactivation factor, are discussed.
Display omitted
•Catalytic degradation of VOCs was introduced.•New hybrid treatments to remove VOCs using catalysts were addressed.•The mechanism of the oxidation of VOCs by a catalyst was suggested.•Several factors affecting the catalytic activities were discussed.
The FactSage computer package consists of a series of information, calculation and manipulation modules that enable one to access and manipulate compound and solution databases. With the various ...modules running under Microsoft Windows® one can perform a wide variety of thermochemical calculations and generate tables, graphs and figures of interest to chemical and physical metallurgists, chemical engineers, corrosion engineers, inorganic chemists, geochemists, ceramists, electrochemists, environmentalists, etc. This paper presents a summary of the developments in the FactSage thermochemical software and databases during the last six years. Particular emphasis is placed on the new databases and developments in calculating and manipulating phase diagrams.
An extensive program of experiments focused on biomass burning emissions began with a laboratory phase in which vegetative fuels commonly consumed in prescribed fires were collected in the ...southeastern and southwestern US and burned in a series of 71 fires at the US Forest Service Fire Sciences Laboratory in Missoula, Montana. The particulate matter (PM2.5) emissions were measured by gravimetric filter sampling with subsequent analysis for elemental carbon (EC), organic carbon (OC), and 38 elements. The trace gas emissions were measured by an open-path Fourier transform infrared (OP-FTIR) spectrometer, proton-transfer-reaction mass spectrometry (PTR-MS), proton-transfer ion-trap mass spectrometry (PIT-MS), negative-ion proton-transfer chemical-ionization mass spectrometry (NI-PT-CIMS), and gas chromatography with MS detection (GC-MS). 204 trace gas species (mostly non-methane organic compounds (NMOC)) were identified and quantified with the above instruments. Many of the 182 species quantified by the GC-MS have rarely, if ever, been measured in smoke before. An additional 153 significant peaks in the unit mass resolution mass spectra were quantified, but either could not be identified or most of the signal at that molecular mass was unaccounted for by identifiable species. In a second, "field" phase of this program, airborne and ground-based measurements were made of the emissions from prescribed fires that were mostly located in the same land management units where the fuels for the lab fires were collected. A broad variety, but smaller number of species (21 trace gas species and PM2.5) was measured on 14 fires in chaparral and oak savanna in the southwestern US, as well as pine forest understory in the southeastern US and Sierra Nevada mountains of California. The field measurements of emission factors (EF) are useful both for modeling and to examine the representativeness of our lab fire EF. The lab EF/field EF ratio for the pine understory fuels was not statistically different from one, on average. However, our lab EF for "smoldering compounds" emitted from the semiarid shrubland fuels should likely be increased by a factor of ~2.7 to better represent field fires. Based on the lab/field comparison, we present emission factors for 357 pyrogenic species (including unidentified species) for 4 broad fuel types: pine understory, semiarid shrublands, coniferous canopy, and organic soil. To our knowledge this is the most comprehensive measurement of biomass burning emissions to date and it should enable improved representation of smoke composition in atmospheric models. The results support a recent estimate of global NMOC emissions from biomass burning that is much higher than widely used estimates and they provide important insights into the nature of smoke. 31–72% of the mass of gas-phase NMOC species was attributed to species that we could not identify. These unidentified species are not represented in most models, but some provision should be made for the fact that they will react in the atmosphere. In addition, the total mass of gas-phase NMOC divided by the mass of co-emitted PM2.5 averaged about three (range ~2.0–8.7). About 35–64% of the NMOC were likely semivolatile or of intermediate volatility. Thus, the gas-phase NMOC represent a large reservoir of potential precursors for secondary formation of ozone and organic aerosol. For the single lab fire in organic soil about 28% of the emitted carbon was present as gas-phase NMOC and ~72% of the mass of these NMOC was unidentified, highlighting the need to learn more about the emissions from smoldering organic soils. The mass ratio of total NMOC to "NOx as NO" ranged from 11 to 267, indicating that NOx-limited O3 production would be common in evolving biomass burning plumes. The fuel consumption per unit area was 7.0 ± 2.3 Mg ha−1 and 7.7 ± 3.7 Mg ha−1 for pine-understory and semiarid shrubland prescribed fires, respectively.
Despite much progress in the development of mixed matrix membranes (MMMs) for many advanced applications, the synthesis of MMMs without particle agglomeration or phase separation at high nanofiller ...loadings is still challenging. In this work, we synthesized nanoporous zeolitic imidazole framework (ZIF‐8) nanoparticles with a particle size of 60 nm and a pore size of 0.34 nm in water and directly added them into an aqueous solution of the organic polymer poly(vinyl alcohol) (PVA) without an intermediate drying process. This approach led to a high‐quality PVA/ZIF‐8 MMM with enhanced performance in ethanol dehydration by pervaporation. The permeability of this MMM is three times higher than that of pristine PVA, and the separation factor is nearly nine times larger than that of pristine PVA. The significantly improved separation performance was attributed to the increase in the fractional free volume in the membranes.
Homogeneous mixed‐matrix membranes (MMMs) based on poly(vinyl alcohol) (PVA) and ZIF‐8 were synthesized in water in a drying‐free process and used for ethanol dehydration by pervaporation. The permeability and the separation factor of this MMM are three and nine times higher than those of pristine PVA.
The new paradigm of electronics, ‘spintronics’, promises to extend the functionality of information storage and processing in conventional electronics. The principal spintronics device, the ‘spin ...valve’, consists of two magnetic layers decoupled by a spin-transporting spacer, which allows parallel (on) and antiparallel (off) alignment of the magnetizations (spins) of the two magnetic layers. The device resistance then depends on the spin alignment controlled by the external magnetic field. In pursuit of semiconductor spintronics, there have been intensive efforts devoted to develop room-temperature magnetic semiconductors and also to incorporate both inorganic semiconductors and carbon-based materials as the spin-transporting channels. Molecule/organic-based magnets, which allow chemical tuning of electronic and magnetic properties, are a promising new class of magnetic materials for future spintronic applications. Here, we report the realization of an organic-based magnet as an electron spin polarizer in the standard spintronics device geometry. A thin non-magnetic organic semiconductor layer and an epitaxial ferromagnetic oxide film were employed to form a hybrid magnetic tunnel junction. The results demonstrate the spin-polarizing nature of the organic-based magnetic semiconductor, vanadium(TCNE: tetracyanoethylene)x (x∼2; Tc∼400 K), and its function as a spin injector/detector in hybrid magnetic multilayer devices.
Summary
Unanticipated difficult laryngoscopy is associated with serious airway‐related complications. We aimed to develop and test a convolutional neural network‐based deep‐learning model that uses ...lateral cervical spine radiographs to predict Cormack–Lehane grade 3 or 4 direct laryngoscopy views of the glottis. We analysed the radiographs of 5939 thyroid surgery patients at our hospital, 253 (4%) of whom had grade 3 or 4 glottic views. We used 10 randomly sampled datasets to train a model. We compared the new model with six similar models (VGG, ResNet, Xception, ResNext, DenseNet and SENet). The Brier score (95%CI) of the new model, 0.023 (0.021–0.025), was lower (‘better’) than the other models: VGG, 0.034 (0.034–0.035); ResNet, 0.033 (0.033–0.035); Xception, 0.032 (0.031–0.033); ResNext, 0.033 (0.032–0.033); DenseNet, 0.030 (0.029–0.032); SENet, 0.031 (0.029–0.032), all p < 0.001. We calculated mean (95%CI) of the new model for: R2, 0.428 (0.388–0.468); mean squared error, 0.023 (0.021–0.025); mean absolute error, 0.048 (0.046–0.049); balanced accuracy, 0.713 (0.684–0.742); and area under the receiver operating characteristic curve, 0.965 (0.962–0.969). Radiographic features around the hyoid bone, pharynx and cervical spine were associated with grade 3 and 4 glottic views.
PDF
