In order to accommodate an increasing demand for glassy carbon products with tailored characteristics, one has to understand the origin of their structure-related properties. In this work, through ...the use of high-resolution transmission electron microscopy, Raman spectroscopy, and electron energy loss spectroscopy it has been demonstrated that the structure of glassy carbon at different stages of the carbonization process resembles the curvature observed in fragments of nanotubes, fullerenes, or nanoonions. The measured nanoindentation hardness and reduced Young’s modulus change as a function of the pyrolysis temperature from the range of 600–2500 °C and reach maximum values for carbon pyrolyzed at around 1000 °C. Essentially, the highest values of the mechanical parameters for glassy carbon manufactured at that temperature can be related to the greatest amount of non-planar
sp
2
-hybridized carbon atoms involved in the formation of curved graphene-like layers. Such complex labyrinth-like structure with
sp
2
-type bonding would be rigid and hard to break that explains the glassy carbon high strength and hardness.
Low physical stability is the main reason limiting the widespread use of amorphous pharmaceuticals. One approach to overcome this problem is to mix these drugs with various excipients. In this study ...coamorphous drug–drug compositions of different molar ratios of ezetimib and indapamid (i.e., EZB 10:1 IDP, EZB 5:1 IDP, EZB 2:1 IDP, EZB 1:1 IDP and EZB 1:2 IDP) were prepared and investigated using differential scanning calorimetry (DSC), broadband dielectric spectroscopy (BDS), and X-ray diffraction (XRD). Our studies have shown that the easily recrystallizing ezetimib drug can be significantly stabilized in its amorphous form by using even a small amount of indapamid (8.8 wt %). DSC experiments indicate that the glass transition temperature (T g) of the tested mixtures changes with the drug concentration in accordance with the Gordon–Taylor equation. We also investigated the effect of indapamid on the molecular dynamics of the ezetimib. As a result it was found that, with increasing indapamid content, the molecular mobility of the binary drug–drug system is slowed down. Finally, using the XRD technique we examined the long-term physical stability of the investigated binary systems stored at room temperature. These measurements prove that low-molecular-weight compounds are able to significantly improve the physical stability of amorphous APIs.
Glass‐like carbon is a well known carbon form that still poses many challenges for structural characterization owing to a very complex internal atomic organization. Recent research suggests that ...glassy carbon has a fullerene‐related structure that evolves with the synthesis temperature. This article reports on direct evidence of curved planes in glassy carbons using neutron and X‐ray diffraction measurements and their analysis in real space using the atomic pair distribution function formalism. Changes in the structure including the degree of curvature of the non‐graphitizing glassy carbons as a function of the pyrolysis temperature in the range 800–2500°C (1073–2773 K) are studied using optimized models of the atomic structure. Averaged models of single coherent scattering domains as well as larger structural fragments consisting of thousands of atoms were relaxed using classical molecular dynamics. For such models the diffraction intensities and the pair distribution functions were computed. The compatibility of the computer‐generated models was verified by comparison of the simulations with the experimental diffraction data in both reciprocal and real spaces. On the basis of features of the developed structural models for glass‐like carbons, the origin of the properties such as high strength and hardness and low gas permeability can be better understood.
This paper reports the characterization of the atomic structure of a series of glass‐like carbons by wide‐angle neutron and X‐ray scattering and molecular dynamics simulations.
The aim of this article was to check the physical stability of the amorphous form of probucol at both standard storage and manufacturing conditions. Our studies clearly show that disordered form of ...the examined, cholesterol lowering, agent stored at ambient pressure does not reveal any tendency toward recrystallization. The physical stability of neat probucol stored at ambient pressure has been investigated (i) at room temperature by means of X-ray diffraction technique (XRD) as well as (ii) at T = 333 K by means of broadband dielectric spectroscopy (BDS). Due to the fact that compression is an important stage of drugs manufacturing we additionally performed physical stability tests of amorphous probucol at elevated pressure. The recrystallization tendency of the examined pharmaceutical has been tracked online from the initial and further up to a few hours after compression by means of the high pressure BDS technique. These experiments indicate that even very small pressure applied during the sample compression immediately induce its recrystallization. Since, the sensitivity on pressure eliminates probucol from the group of physically stable amorphous APIs, its stabilization is required. Taking into account that there are many scientific reports describing the positive effect of coadministration of probucol with the drug atorvastatin, we used the latter as probucol’s crystallization inhibitor.
We examined a series of structurally related glass-forming liquids in which a phenothiazine-based tricyclic core (PTZ) was modified by attaching n-alkyl chains of different lengths (n = 4, 8, 10). We ...systematically disentangled the impact of chemical structure modification on the intermolecular organization and molecular dynamics probed by broadband dielectric spectroscopy (BDS). X-ray diffraction (XRD) patterns evidenced that all PTZ-derivatives are not 'ordinary' liquids and form nanoscale clusters. The chain length has a decisive impact on properties, exerting a plasticizing effect on the dynamics. Its elongation decreases glass transition temperature with slight impact on fragility. The increase in the medium-range order was manifested as a broadening of the dielectric loss peak reflected in the lower value of stretching parameter β
. A disagreement with the behavior observed for non-associating liquids was found as a deviation from the anti-correlation between the value of β
and the relaxation strength of the α-process. Besides, to explain the broadening of loss peak in PTZ with the longest (decyl) chain a slow Debye process was postulated. In contrast, the sample with the shortest alkyl chain and a less complex structure with predominant supramolecular assembly through π-π stacking exhibits no clear Debye-mode fingerprints. The possible reasons are also discussed.
In this paper, a novel approach to determine stable concentration in API-polymer systems is presented. As a model, binary amorphous mixtures flutamide (FL) drug with a copolymer Kollidon VA64 ...(PVP/VA) have been used. It is worthwhile to note that finding an effective method to achieve this goal is a matter of great importance because physical stability of the amorphous pharmaceuticals is the key issue that is investigated worldwide. Due to the fact that molecular dynamics was found to be the crucial factor affecting physical stability of disordered pharmaceuticals, we examined it for both neat FL and its PVP/VA mixtures by means of broadband dielectric spectroscopy (BDS). Thorough investigation of the impact of polymeric additive on the molecular mobility of disordered FL reveals unusual, previously unreported behavior. Namely, simultaneously with the beginning of the recrystallization process, we observe some transformation from unstable supersaturated concentration of investigated mixture to the different, unknown concentration of FL-PVP/VA. Observed, during BDS experiment, transformation enables us to determine the limiting, highly physically stable concentration of FL in PVP/VA polymer (saturated solution), which is equivalent to FL + 41% wt. of PVP/VA. The described high physical stability of this unveiled system has been confirmed by means of long-term XRD measurements. According to our knowledge, this is the first time when such a behavior has been observed by means of BDS.
In this Letter we report significant differences in the dielectric behavior of four nonpolymeric and sizable glass-forming molecules with related chemical structures. They belong to the recently ...constituted class of sizable glass-formers Jedrzejowska et al.
2020, 101, 010603, for which the pattern of change in dielectric properties with structure has not yet been fully discovered. In the present study we tackle the fundamental problem of the structure-dynamics relationship. It was made possible by judicious choice of investigated systems with the values of dipole moments purposely kept at about the same level, and the only difference is the structure of the terminal substituents applied. The remarkable effect revealed by broadband dielectric spectroscopy is a large difference in the frequency dispersion of the α-relaxation for the systems studied. This interesting finding can be rationalized by the results of X-ray diffraction, clearly indicating the dissimilarities in the local intermolecular structure.
High pressure dielectric studies on the H-bonded liquid D-glucose and Orientationally Disordered Crystal (ODIC) 1,6-anhydro-D-glucose (levoglucosan) were carried out. It was shown that in both ...compounds, the structural relaxation is weakly sensitive to compression. It is well reflected in the low pressure coefficient of the glass transition and orientational glass transition temperatures which is equal to 60 K/GPa for both D-glucose and 1,6-anhydro-D-glucose. Although it should be noted that ∂Tg(0)/∂p evaluated for the latter compound seems to be enormously high with respect to other systems forming ODIC phase. We also found that the shape of the α-loss peak stays constant for the given relaxation time independently on the thermodynamic condition. Consequently, the Time Temperature Pressure (TTP) rule is satisfied. This experimental finding seems to be quite intriguing since the TTP rule was shown to work well in the van der Waals liquids, while in the strongly associating compounds, it is very often violated. We have also demonstrated that the sensitivity of the structural relaxation process to the temperature change measured by the steepness index (mp) drops with pressure. Interestingly, this change is much more significant in the case of D-glucose with respect to levoglucosan, where the fragility changes only slightly with compression. Finally, kinetics of ODIC-crystal phase transition was studied at high compression. It is worth mentioning that in the recent paper, Tombari and Johari J. Chem. Phys. 142, 104501 (2015) have shown that ODIC phase in 1,6-anhydro-D-glucose is stable in the wide range of temperatures and there is no tendency to form more ordered phase at ambient pressure. On the other hand, our isochronal measurements performed at varying thermodynamic conditions indicated unquestionably that the application of pressure favors solid (ODIC)-solid (crystal) transition in 1,6-anhydro-D-glucose. This result mimics the impact of pressure on the crystallization of fully disordered supercooled van der Waals liquids.
Display omitted
Broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC) were applied to investigate the molecular dynamics and phase transitions in binary mixtures ...composed of naproxen (NAP) and acetylated saccharides: maltose (acMAL) and sucrose (acSUC). Moreover, the application of BDS method and optical microscopy enabled us to study both crystallization kinetics and crystal growth of naproxen from the solid dispersions with the highest content of modified carbohydrates (1:5wt ratio). It was found that the activation barriers of crystallization estimated from dielectric measurements are completely different for both studied herein mixtures. Much higher Ea (=205kJ/mol) was obtained for NAP-acMAL solid dispersion. It is probably due to simultaneous crystallization of both components of the mixture. On the other hand, lower value of Ea in the case of NAP-acSUC solid dispersion (81kJ/mol) indicated, that naproxen is the only crystallizing compound. This hypothesis was confirmed by X-ray diffraction studies. We also suggested that specific intermolecular dipole-dipole interactions between active substance and excipient may be an alternative explanation for the difference between activation barrier obtained for NAP-acMAL and NAP-acSUC binary mixtures. Furthermore, optical measurements showed that the activation energy for crystal growth of naproxen increases in binary mixtures. They also revealed that both excipients: acMAL and acSUC move the temperature of the maximum of crystal growth towards lower temperatures. Interestingly, this maximum occurs for nearly the same structural relaxation time, which is a good approximation of viscosity, for all samples. Finally, it was also noticed that although naproxen crystallizes to the same polymorphic form in both systems, there are some differences in morphology of obtained crystals. Thus, the observed behavior may have a significant impact on the bioavailability and dissolution rate of API produced in that way.
The purpose of this paper is to investigate the influence of nanoconfinement on the molecular mobility, as well as on the physical stability, of amorphous ezetimibe drug. Two guest/host systems, ...ezetimibe–Aeroperl 300 and ezetimibe–Neusilin US2, were prepared and studied using various experimental techniques, such as X-ray diffraction (XRD), differential scanning calorimetry (DSC), and broadband dielectric spectroscopy (BDS). Our investigation has shown that the molecular mobility of the examined anticholesterol agent incorporated into nanopore matrices strongly depends on the pore size of the host system. Moreover, it was found that the amorphous ezetimibe confined in 30 nm pores of Aeroperl 300 has a tendency to recrystallize, while the drug incorporated into the smaller5 nmpores of Neusilin US2 is not able to crystallize. It has been shown that this significant stabilization of ezetimibe drug can be achieved by an interplay of three factors: changes in molecular dynamics of the confined amorphous drug, the immobilization effect of pore walls on a part of ezetimibe molecules, and the use of host materials with pores that are smaller than the critical size of the drug crystal nuclei.