We combine searches by the CDF and D0 Collaborations for the associated production of a Higgs boson with a W or Z boson and subsequent decay of the Higgs boson to a bottom-antibottom quark pair. The ...data, originating from Fermilab Tevatron pp collisions at √s = 1.96 TeV, correspond to integrated luminosities of up to 9.7 fb(-1). The searches are conducted for a Higgs boson with mass in the range 100-150 GeV/c(2). We observe an excess of events in the data compared with the background predictions, which is most significant in the mass range between 120 and 135 GeV/c(2). The largest local significance is 3.3 standard deviations, corresponding to a global significance of 3.1 standard deviations. We interpret this as evidence for the presence of a new particle consistent with the standard model Higgs boson, which is produced in association with a weak vector boson and decays to a bottom-antibottom quark pair.
We report the observation of single top-quark production using 3.2 fb(-1) of ppover collision data with sqrts=1.96 TeV collected by the Collider Detector at Fermilab. The significance of the ...observed data is 5.0 standard deviations, and the expected sensitivity for standard model production and decay is in excess of 5.9 standard deviations. Assuming m(t) = 175 GeV/c(2), we measure a cross section of 2.3(-0.5);(+0.6)(stat + syst) pb, extract the CKM matrix-element value |V(tb)| = 0.91 + or - 0.11(stat + syst) + or - 0.07(theory), and set the limit |V(tb)| > 0.71 at the 95% C.L.
GEM based detector for future upgrade of the CMS forward muon system Abbaneo, D.; Armagnaud, C.; Abbrescia, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2013, Letnik:
718
Journal Article
Recenzirano
In view of an upgrade of the CMS experiment, the GEM for CMS collaboration is performing feasibility studies on employing Triple-GEM detectors for the high-η region (1.6–2.4) of the CMS endcaps. A ...detailed review of the development and characterization of the CMS full-size prototype baseline detector will be presented. GEMs have excellent spatial and time resolution, high rate capability and radiation hardness, they are an appealing option for simultaneously enhancing muon tracking and triggering capabilities in the high-η region. The GEM for CMS collaboration has studied the performance of small and full-size prototype detectors during several test beam campaigns in order to validate new technologies and techniques in view of a mass production for CMS experiment. Results from measurements with x-rays and from test beam campaigns at the CERN SPS will be shown from both small and large prototypes.
The CMS Collaboration has been developing large-area triple-gas electron multiplier (GEM) detectors to be installed in the muon Endcap regions of the CMS experiment in 2019 to maintain forward muon ...trigger and tracking performance at the High-Luminosity upgrade of the Large Hadron Collider (LHC); 10 preproduction detectors were built at CERN to commission the first assembly line and the quality controls (QCs). These were installed in the CMS detector in early 2017 and participated in the 2017 LHC run. The collaboration has prepared several additional assembly and QC lines for distributed mass production of 160 GEM detectors at various sites worldwide. In 2017, these additional production sites have optimized construction techniques and QC procedures and validated them against common specifications by constructing additional preproduction detectors. Using the specific experience from one production site as an example, we discuss how the QCs make use of independent hardware and trained personnel to ensure fast and reliable production. Preliminary results on the construction status of CMS GEM detectors are presented with details of the assembly sites involvement.
We present a measurement of the total decay width of the top quark using events with top-antitop quark pair candidates reconstructed in the final state with one charged lepton and four or more ...hadronic jets. We use the full Tevatron run II data set of sqrts=1.96 TeV proton-antiproton collisions recorded by the CDF II detector. The top quark mass and the mass of the hadronically decaying W boson are reconstructed for each event and compared with distributions derived from simulated signal and background samples to extract the top quark width (Γtop) and the energy scale of the calorimeter jets with in situ calibration. For a top quark mass Mtop=172.5 GeV/c2, we find 1.10<Γtop<4.05 GeV at 68% confidence level, which is in agreement with the standard model expectation of 1.3 GeV and is the most precise direct measurement of the top quark width to date.
We present a search for high-mass neutral resonances using dimuon data corresponding to an integrated luminosity of 2.3 fb(-1) collected in ppover collisions at sqrts=1.96 TeV by the CDF II detector ...at the Fermilab Tevatron. No significant excess above the standard model expectation is observed in the dimuon invariant-mass spectrum. We set 95% confidence level upper limits on sigmaBR(pp-->X-->micromicro), where X is a boson with spin-0, 1, or 2. Using these cross section limits, we determine lower mass limits on sneutrinos in R-parity-violating supersymmetric models, Z' bosons, and Kaluza-Klein gravitons in the Randall-Sundrum model.
We present the first observation of exclusive e(+)e(-) production in hadron-hadron collisions, using ppover collision data at (square root) s = 1.96 TeV taken by the run II Collider Detector at ...Fermilab, and corresponding to an integrated luminosity of 532 pb(-1). We require the absence of any particle signatures in the detector except for an electron and a positron candidate, each with transverse energy E(T) > 5 GeV and pseudorapidity |eta| < 2. With these criteria, 16 events are observed compared to a background expectation of 1.9+/-0.3 events. These events are consistent in cross section and properties with the QED process ppover --> p + e(+)e(-) + pover through two-photon exchange. The measured cross section is 1.6(-0.3)(+0.5)(stat) +/- 0.3(syst) pb. This agrees with the theoretical prediction of 1.71+/-0.01 pb.
Combined constraints from the CDF and D0 Collaborations on models of the Higgs boson with exotic spin J and parity P are presented and compared with results obtained assuming the standard model value ...JP=0+. Both collaborations analyzed approximately 10 fb(-) of proton-antiproton collisions with a center-of-mass energy of 1.96 TeV collected at the Fermilab Tevatron. Two models predicting exotic Higgs bosons with JP=0- and JP=2+ are tested. The kinematic properties of exotic Higgs boson production in association with a vector boson differ from those predicted for the standard model Higgs boson. Upper limits at the 95% credibility level on the production rates of the exotic Higgs bosons, expressed as fractions of the standard model Higgs boson production rate, are set at 0.36 for both the JP=0- hypothesis and the JP=2+ hypothesis. If the production rate times the branching ratio to a bottom-antibottom pair is the same as that predicted for the standard model Higgs boson, then the exotic bosons are excluded with significances of 5.0 standard deviations and 4.9 standard deviations for the JP=0- and JP=2+ hypotheses, respectively.
We search for new charmless decays of neutral b hadrons to pairs of charged hadrons, using 1 fb(-1) of data collected by the CDF II detector at the Fermilab Tevatron. We report the first observation ...of the Bs0-->K-pi+ decay and measure B(Bs0-->K-pi+)=(5.0+/-0.7(stat)+/-0.8(syst))x10(-6). We also report the first observation of charmless b-baryon decays, and measure B(Lambdab0-->ppi-)=(3.5+/-0.6(stat)+/-0.9(syst))x10(-6) and B(Lambdab0-->pK-)=(5.6+/-0.8(stat)+/-1.5(syst))x10(-6). No evidence is found for other modes, and we set the limit B(Bs0-->pi+pi;-)<1.2x10(-6) at 90% C.L.
The status of the GEM project for CMS high-η muon system Abbaneo, D.; Abbrescia, M.; Armagnaud, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
12/2013, Letnik:
732
Journal Article
Recenzirano
Odprti dostop
The dedicated CMS R&D program was intended to study the feasibility of using micropattern detectors for the instrumentation of the vacant |η|>1.6 region in the present Resistive Plate Chambers (RPCs) ...endcap system. The proposed detector for CMS is a Triple-Gas Electron Multiplier (GEM) trapezoidal chamber, equipped with 1D readout. While during 2010–2011 the Collaboration worked on the prototyping of the detector, during the first part of 2012 a newly developed assembly technique to be used for the mass production was adopted. GEMs can provide precision tracking and fast trigger information, contributing on one hand to the improvement of the CMS muon Trigger and on the other hand to provide the missing redundancy in the high η region. In the view of the next LHC long shutdown (LS1) the CMS GEM Collaboration designed and built four full-size Triple GEM-based muon detectors.