In this paper, we presented a novel microbial fuel cell (bMFC) structure, with a bipolar membrane separating the anode and cathode chambers. A bipolar membrane divides the bMFC into anode and cathode ...chambers. The bipolar membrane comprises anion and cation exchange layers. The anode chamber side has the cation exchange layer, while the cathode chamber side has the anion exchange layer. The anode chamber of the bMFC was loaded with Shewanella oneidensis MR-1 and lactic acid, while the cathode chamber was loaded with pure water and iron (III) hydroxide. The bMFC generated electrons for 20 days at a maximum current density of 30 mA/m2 and the ohmic resistance value was estimated to be 500 Ω. During the operation of the bMFC, both the anode and cathode chambers kept anaerobic conditions. There was no platinum catalyst in the cathode chamber, which is required for the reaction of protons with oxygen. Therefore, oxygen could not serve as an electron acceptor in the bMFC. We considered a bMFC mechanism in which protons produced by S. oneidensis react with hydroxide ions, the counter anions of Fe3+, inside the bipolar membrane to produce water. In other words, the electron acceptor in bMFC would be Fe3+.
Escherichia coli JM109 (pGV3-SBA) can assimilate starch by fusing the starch-digesting enzyme α-amylase from Streptococcus bovis NRIC1535 to an OprI′ lipoprotein anchor on the cell membrane. This ...study shows microbial fuel cells (MFCs) development using this recombinant type of E. coli and starch as fuel. We observed the current generation of MFCs with E. coli JM109 (pGV3-SBA) for 120 h. During this period, it consumed 7.1 g/L of starch. A mediator in the form of anthraquinone-2,6-disulfonic acid disodium salt at 0.2, 0.4, and 0.8 mM was added to the MFCs. The highest maximum-current density (271 mA/m2) and maximum-power density (29.3 mW/m2) performances occurred in the 0.4 mM mediator solution. Coulomb yields were calculated as 3.4%, 3.0%, and 3.5% in 1.0, 5.0, and 10.0 g/L of initial starch, respectively. The concentrations of acetic acid, succinic acid, fumaric acid, and ethanol as metabolites were determined. In particular, 38.3 mM of ethanol was produced from 7.1 g/L of starch. This study suggests the use of recombinant E. coli which can assimilate starch present in starch-fueled MFCs. Moreover, it proposes the possibility of gene recombination technology for using wide variety of biomass as fuel and improving MFC's performance.
Objectives
A bipolar membrane microbial fuel cell (bMFC) is used to generate electricity using cellulose in phosphate buffer solution as fuel, and the mechanism of electricity generation is ...elucidated from five reference experiments.
Results
The bMFC was operated for 20 days using cellulose as fuel and
Cellulomonas fimi
. In the first reference experiment, no microorganism was used. In the second experiment, a cation-exchange membrane was used instead of a bipolar membrane. In the third experiment, the bipolar membrane was used in the opposite orientation as in the main experiment. In the fourth experiment, D
2
O was used instead of H
2
O in the cathode chamber. In the final experiment, the tris-maleate buffer was used instead of a phosphate buffer. Sufficient power generation did not occur in either reference experiment.
Conclusions
The bMFC continuously generated electricity for 20 days, and elucidated H
+
and OH
−
react in bipolar membrane, where the counter cation of dihydrogen phosphate served as the final electron acceptor.