Intention-Based EMG Control for Powered Exoskeletons Lenzi, Tommaso; De Rossi, Stefano Marco Maria; Vitiello, Nicola ...
IEEE transactions on biomedical engineering,
08/2012, Letnik:
59, Številka:
8
Journal Article
Recenzirano
Electromyographical (EMG) signals have been frequently used to estimate human muscular torques. In the field of human-assistive robotics, these methods provide valuable information to provide ...effectively support to the user. However, their usability is strongly limited by the necessity of complex user-dependent and session-dependent calibration procedures, which confine their use to the laboratory environment. Nonetheless, an accurate estimate of muscle torque could be unnecessary to provide effective movement assistance to users. The natural ability of human central nervous system of adapting to external disturbances could compensate for a lower accuracy of the torque provided by the robot and maintain the movement accuracy unaltered, while the effort is reduced. In order to explore this possibility, in this paper we study the reaction of ten healthy subjects to the assistance provided through a proportional EMG control applied by an elbow powered exoskeleton. This system gives only a rough estimate of the user muscular torque but does not require any specific calibration. Experimental results clearly show that subjects adapt almost instantaneously to the assistance provided by the robot and can reduce their effort while keeping full control of the movement under different dynamic conditions (i.e., no alterations of movement accuracy are observed).
The field of wearable robotics is gaining momentum thanks to its potential application in rehabilitation engineering, assistive robotics, and power augmentation. These devices are designed to be used ...in direct contact with the user to aid with movement or increase the power of specific skeletal joints. The design of the so-called physical human-robot interface is critical, since it determines not only the efficacy of the robot but the kinematic compatibility of the device with the human skeleton and the degree of adaptation to different anthropometries as well. Failing to deal with these problems causes misalignments between the robot and the user joint. Axes misalignment leads to the impossibility of controlling the torque effectively transmitted to the user joint and causes undesired loading forces on articulations and soft tissues. In this paper, we propose a general analytical method for the design of exoskeletons able to assist human joints without being subjected to misalignment effects. This method is based on a kinetostatic analysis of a coupled mechanism (robot-human skeleton) and can be applied in the design of self-aligning mechanisms. The method is exemplified in the design of an assistive robotic chain for a two-degree-of-freedom (DOF) human articulation.
This paper presents the design and experimental testing of the robotic elbow exoskeleton NEUROBOTICS Elbow Exoskeleton (NEUROExos). The design of NEUROExos focused on three solutions that enable its ...use for poststroke physical rehabilitation. First, double-shelled links allow an ergonomic physical human-robot interface and, consequently, a comfortable interaction. Second, a four-degree-of-freedom passive mechanism, embedded in the link, allows the user's elbow and robot axes to be constantly aligned during movement. The robot axis can passively rotate on the frontal and horizontal planes 30° and 40°, respectively, and translate on the horizontal plane 30 mm. Finally, a variable impedance antagonistic actuation system allows NEUROExos to be controlled with two alternative strategies: independent control of the joint position and stiffness, for robot-in-charge rehabilitation mode, and near-zero impedance torque control, for patient-in-charge rehabilitation mode. In robot-in-charge mode, the passive joint stiffness can be changed in the range of 24-56 N·m/rad. In patient-in-charge mode, NEUROExos output impedance ranges from 1 N·m/rad, for 0.3 Hz motion, to 10 N·m/rad, for 3.2 Hz motion.
Heterogeneous photocatalysis is a convenient tool for mercury(II) reduction, because it uses inexpensive chemicals and near-UV light. However, structural features of titania (band gap at 3.2eV) make ...extending its optical absorption in the visible region difficult. This key factor results in low photocatalytic efficiency, as about only 5% of the solar spectrum is used. This study focuses on the characterization and evaluation of the photocatalytic activity of TiO₂. The titania preparation method (commercial and sol–gel), the presence of metal on the surface of the oxide (2% wt. Ag), and the calcination temperature (350 and 500°C) were evaluated. The characterization techniques used were: temperature-programmed reduction (TPR), determination of specific surface area (BET method), X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoacoustic spectroscopy. The photocatalytic reduction of Hg²⁺ to Hg⁰ was performed by aqueous solution containing formic acid. The results showed that the presence of Ag on the surface of TiO₂ (commercial and sol–gel) decreased the band gap energy and increased the photoactivity efficiency, i.e., all the Hg²⁺ in the solution was reduced to Hg⁰.
The strong dependence of Coulomb energies on nuclear radii makes it possible to extract the latter from calculations of the former. The resulting estimates of neutron skins indicate that two ...mechanisms are involved. The first one-isovector monopole polarizability-amounts to noting that when a particle is added to a system it drives the radii of neutrons and protons in different directions, tending to equalize the radii of both fluids independently of the neutron excess. This mechanism is well understood and the Duflo-Zuker (small) neutron skin values derived 14 years ago are consistent with recent measures and estimates. The alternative mechanism involves halo orbits whose huge sizes tend to make the neutron skins larger and have a subtle influence on the radial behavior of sd and pf shell nuclei. In particular, they account for the sudden rise in the isotope shifts of nuclei beyond N=28 and the near constancy of radii in the A=40-56 region. This mechanism, detected here for the first time, is not well understood and may well go beyond the Efimov physics usually associated with halo orbits.
Shell structure and magic numbers in atomic nuclei were generally explained by pioneering work$^{1}$ that introduced a strong spin-orbit interaction to the nuclear shell model potential. However, ...knowledge of nuclear forces and the mechanisms governing the structure of nuclei, in particular far from stability, is still incomplete. In nuclei with equal neutron and proton numbers (N=Z), enhanced correlations arise between neutrons and protons (two distinct types of fermions) that occupy orbitals with the same quantum numbers. Such correlations have been predicted to favour an unusual type of nuclear superfluidity, termed isoscalar neutron- proton pairing $^{2,3,4,5,6}$, in addition to normal isovector pairing. Despite many experimental efforts, these predictions have not been confirmed. Here we report the experimental observation of excited states in the N =Z 46 nucleus $^{92}$Pd. Gamma rays emitted following the $^{58}Ni(^{36}Ar,2n) ^{92}$Pd fusion-evaporation reaction were identified using a combination of state-of-the-art high-resolution c-ray, charged-particle and neutron detector systems. Our results reveal evidence for a spin-aligned, isoscalar neutron-proton coupling scheme, different from the previous prediction $^{2,3,4,5,6}$. We suggest that this coupling scheme replaces normal superfluidity (characterized by seniority coupling$^{7,8}$ in the ground and low-lying excited states of the heaviest N =Z nuclei. Such strong, isoscalar neutron-proton correlations would have a considerable impact on the nuclear level structure and possibly influence the dynamics of rapid proton capture in stellar nucleosynthesis.
A novel Monte Carlo technique has been developed to determine lifetimes of excited states in the tens-to-hundreds femtoseconds range in products of low-energy heavy-ion binary reactions, with complex ...velocity distributions. The method is based on a detailed study of Doppler-broadened
γ
-ray lineshapes. Its relevance is demonstrated in connection with the
18
O
(
7.0
MeV/u
)
+
181
Ta
experiment, performed at GANIL with the AGATA+VAMOS+PARIS setup, to study neutron-rich O, C, N, ... nuclei. Excited states in
17
O
and
19
O
, with known lifetimes, are used to validate the method over the
∼
20
-
400
fs
lifetime-sensitivity range. Emphasis is given to the unprecedented position resolution provided by
γ
-tracking arrays, which turns out to be essential for reaching the required accuracy in Doppler-shift correction. The technique is anticipated to be an important tool for lifetime investigations in exotic neutron-rich nuclei, produced with intense ISOL-type beams.
One-neutron knockout reactions have been performed on a beam of radioactive ^{53}Co in a high-spin isomeric state. The analysis is shown to yield a highly selective population of high-spin states in ...an exotic nucleus with a significant cross section, and hence represents a technique that is applicable to the planned new generation of fragmentation-based radioactive beam facilities. Additionally, the relative cross sections among the excited states can be predicted to a high level of accuracy when reliable shell-model input is available. The work has resulted in a new level scheme, up to the 11^{+} band-termination state, of the proton-rich nucleus ^{52}Co (Z=27, N=25). This has in turn enabled a study of mirror energy differences in the A=52 odd-odd mirror nuclei, interpreted in terms of isospin-nonconserving (INC) forces in nuclei. The analysis demonstrates the importance of using a full set of J-dependent INC terms to explain the experimental observations.