Nitrogen-doped carbon materials featuring atomically dispersed metal cations (M–N–C) are an emerging family of materials with potential applications for electrocatalysis. The electrocatalytic ...activity of M–N–C materials toward four-electron oxygen reduction reaction (ORR) to H2O is a mainstream line of research for replacing platinum-group-metal-based catalysts at the cathode of fuel cells. However, fundamental and practical aspects of their electrocatalytic activity toward two-electron ORR to H2O2, a future green “dream” process for chemical industry, remain poorly understood. Here we combined computational and experimental efforts to uncover the trends in electrochemical H2O2 production over a series of M–N–C materials (M = Mn, Fe, Co, Ni, and Cu) exclusively comprising atomically dispersed M–N x sites from molecular first-principles to bench-scale electrolyzers operating at industrial current density. We investigated the effect of the nature of a 3d metal within a series of M–N–C catalysts on the electrocatalytic activity/selectivity for ORR (H2O2 and H2O products) and H2O2 reduction reaction (H2O2RR). Co–N–C catalyst was uncovered with outstanding H2O2 productivity considering its high ORR activity, highest H2O2 selectivity, and lowest H2O2RR activity. The activity–selectivity trend over M–N–C materials was further analyzed by density functional theory, providing molecular-scale understandings of experimental volcano trends for four- and two-electron ORR. The predicted binding energy of HO* intermediate over Co–N–C catalyst is located near the top of the volcano accounting for favorable two-electron ORR. The industrial H2O2 productivity over Co–N–C catalyst was demonstrated in a microflow cell, exhibiting an unprecedented production rate of more than 4 mol peroxide gcatalyst –1 h–1 at a current density of 50 mA cm–2.
Replacing scarce and expensive platinum (Pt) with metal–nitrogen–carbon (M–N–C) catalysts for the oxygen reduction reaction in proton exchange membrane fuel cells has largely been impeded by the low ...oxygen reduction reaction activity of M–N–C due to low active site density and site utilization. Herein, we overcome these limits by implementing chemical vapour deposition to synthesize Fe–N–C by flowing iron chloride vapour over a Zn–N–C substrate at 750 °C, leading to high-temperature trans-metalation of Zn–N4 sites into Fe–N4 sites. Characterization by multiple techniques shows that all Fe–N4 sites formed via this approach are gas-phase and electrochemically accessible. As a result, the Fe–N–C catalyst has an active site density of 1.92 × 1020 sites per gram with 100% site utilization. This catalyst delivers an unprecedented oxygen reduction reaction activity of 33 mA cm−2 at 0.90 V (iR-corrected; i, current; R, resistance) in a H2–O2 proton exchange membrane fuel cell at 1.0 bar and 80 °C.Replacing platinum with metal–nitrogen–carbon catalysts for the oxygen reduction reaction in proton exchange membrane fuel cells has been impeded by low activity. These limitations have now been overcome by the trans-metalation of Zn–N4 sites into Fe–N4 sites.
Copper can efficiently electro‐catalyze carbon dioxide reduction to C2+ products (C2H4, C2H5OH, n‐propanol). However, the correlation between the activity and active sites remains ambiguous, impeding ...further improvements in their performance. The facet effect of copper crystals to promote CO adsorption and C−C coupling and consequently yield a superior selectivity for C2+ products is described. We achieve a high Faradaic efficiency (FE) of 87 % and a large partial current density of 217 mA cm−2 toward C2+ products on Cu(OH)2‐D at only −0.54 V versus the reversible hydrogen electrode in a flow‐cell electrolyzer. With further coupled to a Si solar cell, record‐high solar conversion efficiencies of 4.47 % and 6.4 % are achieved for C2H4 and C2+ products, respectively. This study provides an in‐depth understanding of the selective formation of C2+ products on Cu and paves the way for the practical application of electrocatalytic or solar‐driven CO2 reduction.
The facet effect of copper crystals to promote CO adsorption and C−C coupling and consequently yield a superior selectivity (87 % Faradaic efficiency) for C2+ products is described. Record‐high solar conversion efficiencies of 4.47 % and 6.4 % are achieved for C2H4 and C2+ products, respectively.
Despite the fundamental and practical significance of the hydrogen evolution and oxidation reactions (HER/HOR), their kinetics in base remain unclear. Herein, we show that the alkaline HER/HOR ...kinetics can be unified by the catalytic roles of the adsorbed hydroxyl (OHad)-water-alkali metal cation (AM+) adducts, on the basis of the observations that enriching the OHad abundance via surface Ni benefits the HER/HOR; increasing the AM+ concentration only promotes the HER, while varying the identity of AM+ affects both HER/HOR. The presence of OHad-(H2O) x -AM+ in the double-layer region facilitates the OHad removal into the bulk, forming OH–-(H2O) x -AM+ as per the hard–soft acid–base theory, thereby selectively promoting the HER. It can be detrimental to the HOR as per the bifunctional mechanism, as the AM+ destabilizes the OHad, which is further supported by the CO oxidation results. This new notion may be important for alkaline electrochemistry.
It is generally believed that CO2 electroreduction to multi‐carbon products such as ethanol or ethylene may be catalyzed with significant yield only on metallic copper surfaces, implying large ...ensembles of copper atoms. Here, we report on an inexpensive Cu‐N‐C material prepared via a simple pyrolytic route that exclusively feature single copper atoms with a CuN4 coordination environment, atomically dispersed in a nitrogen‐doped conductive carbon matrix. This material achieves aqueous CO2 electroreduction to ethanol at a Faradaic yield of 55 % under optimized conditions (electrolyte: 0.1 m CsHCO3, potential: −1.2 V vs. RHE and gas‐phase recycling set up), as well as CO electroreduction to C2‐products (ethanol and ethylene) with a Faradaic yield of 80 %. During electrolysis the isolated sites transiently convert into metallic copper nanoparticles, as shown by operando XAS analysis, which are likely to be the catalytically active species. Remarkably, this process is reversible and the initial material is recovered intact after electrolysis.
N‐doped carbon containing isolated Cu atoms proves highly selective for CO2 electroreduction to ethanol. Operando spectroscopic characterization of the catalyst establishes that the active species during electrolysis are transient small Cu nanoparticles. The restructuration of metal sites is reversible.
Single-atom catalysts with full utilization of metal centers can bridge the gap between molecular and solid-state catalysis. Metal-nitrogen-carbon materials prepared via pyrolysis are promising ...single-atom catalysts but often also comprise metallic particles. Here, we pyrolytically synthesize a Co-N-C material only comprising atomically dispersed cobalt ions and identify with X-ray absorption spectroscopy, magnetic susceptibility measurements and density functional theory the structure and electronic state of three porphyrinic moieties, CoN
C
, CoN
C
and CoN
C
. The O
electro-reduction and operando X-ray absorption response are measured in acidic medium on Co-N-C and compared to those of a Fe-N-C catalyst prepared similarly. We show that cobalt moieties are unmodified from 0.0 to 1.0 V versus a reversible hydrogen electrode, while Fe-based moieties experience structural and electronic-state changes. On the basis of density functional theory analysis and established relationships between redox potential and O
-adsorption strength, we conclude that cobalt-based moieties bind O
too weakly for efficient O
reduction.Nitrogen-doped carbon materials with atomically dispersed iron or cobalt are promising for catalytic use. Here, the authors show that cobalt moieties have a higher redox potential, bind oxygen more weakly and are less active toward oxygen reduction than their iron counterpart, despite similar coordination.
Proper understanding of the major limitations of current catalysts for oxygen reduction reaction (ORR) is essential for further advancement. Herein by studying representative Pt and non-Pt ORR ...catalysts with a wide range of redox potential (E redox) via combined electrochemical, theoretical, and in situ spectroscopic methods, we demonstrate that the role of the site-blocking effect in limiting the ORR varies drastically depending on the E redox of active sites; and the intrinsic activity of active sites with low E redox have been markedly underestimated owing to the overlook of this effect. Accordingly, we establish a general asymmetric volcano trend in the ORR activity: the ORR of the catalysts on the overly high E redox side of the volcano is limited by the intrinsic activity; whereas the ORR of the catalysts on the low E redox side is limited by either the site-blocking effect and/or intrinsic activity depending on the E redox.
Doping with a transition metal was recently shown to greatly boost the activity and durability of PtNi/C octahedral nanoparticles (NPs) for the oxygen reduction reaction (ORR), but its specific roles ...remain unclear. By combining electrochemistry, ex situ and in situ spectroscopic techniques, density functional theory calculations, and a newly developed kinetic Monte Carlo model, we showed that Mo atoms are preferentially located on the vertex and edge sites of Mo–PtNi/C in the form of oxides, which are stable within the wide potential window of the electrochemical cycle. These surface Mo oxides stabilize adjacent Pt sites, hereby stabilizing the octahedral shape enriched with (111) facets, and lead to increased concentration of Ni in subsurface layers where they are protected against acid dissolution. Consequently, the favorable Pt3Ni(111) structure for the ORR is stabilized on the surface of PtNi/C NPs in acid against voltage cycling. Significantly, the unusual potential-dependent oxygen coverage trend on Mo-doped PtNi/C NPs as revealed by the surface-sensitive Δμ analysis suggests that the Mo dopants may also improve the ORR kinetics by modifying the coordination environments of Pt atoms on the surface. Our studies point out a possible way to stabilize the favorable shape and composition established on conceptual catalytic models in practical nanoscale catalysts.
Realization of the hydrogen economy relies on effective hydrogen production, storage, and utilization. The slow kinetics of hydrogen evolution and oxidation reaction (HER/HOR) in alkaline media ...limits many practical applications involving hydrogen generation and utilization, and how to overcome this fundamental limitation remains debatable. Here we present a kinetic study of the HOR on representative catalytic systems in alkaline media. Electrochemical measurements show that the HOR rate of Pt‐Ru/C and Ru/C systems is decoupled to their hydrogen binding energy (HBE), challenging the current prevailing HBE mechanism. The alternative bifunctional mechanism is verified by combined electrochemical and in situ spectroscopic data, which provide convincing evidence for the presence of hydroxy groups on surface Ru sites in the HOR potential region and its key role in promoting the rate‐determining Volmer step. The conclusion presents important references for design and selection of HOR catalysts.
Bifunctional mechanism: Experimental evidence for hydroxy groups adsorbed onto Ru surface sites at the hydrogen oxidation reaction (HOR) potential region supports the bifunctional mechanism for the HOR kinetics of Pt‐Ru/C and Ru/C catalysts in alkaline media. The result presents important references for the design and selection of HOR catalysts.
Pyrolysis is indispensable for synthesizing highly active Fe–N–C catalysts for the oxygen reduction reaction (ORR) in acid, but how Fe, N, and C precursors transform to ORR-active sites during ...pyrolysis remains unclear. This knowledge gap obscures the connections between the input precursors and the output products, clouding the pathway toward Fe–N–C catalyst improvement. Herein, we unravel the evolution pathway of precursors to ORR-active catalyst comprised exclusively of single-atom Fe1(II)–N4 sites via in-temperature X-ray absorption spectroscopy. The Fe precursor transforms to Fe oxides below 300 °C and then to tetrahedral Fe1(II)–O4 via a crystal-to-melt-like transformation below 600 °C. The Fe1(II)–O4 releases a single Fe atom that diffuses into the N-doped carbon defect forming Fe1(II)–N4 above 600 °C. This vapor-phase single Fe atom transport mechanism is verified by synthesizing Fe1(II)–N4 sites via “noncontact pyrolysis” wherein the Fe precursor is not in physical contact with the N and C precursors during pyrolysis.