The coronavirus disease 2019 (COVID-19) pandemic has resulted in millions of patients infected worldwide and indirectly affecting even more individuals through disruption of daily living. Long-term ...adverse outcomes have been reported with similar diseases from other coronaviruses, namely Middle East Respiratory Syndrome (MERS) and Severe Acute Respiratory Syndrome (SARS). Emerging evidence suggests that COVID-19 adversely affects different systems in the human body. This review summarizes the current evidence on the short-term adverse health outcomes and assesses the risk of potential long-term adverse outcomes of COVID-19. Major adverse outcomes were found to affect different body systems: immune system (including but not limited to Guillain-Barré syndrome and paediatric inflammatory multisystem syndrome), respiratory system (lung fibrosis and pulmonary thromboembolism), cardiovascular system (cardiomyopathy and coagulopathy), neurological system (sensory dysfunction and stroke), as well as cutaneous and gastrointestinal manifestations, impaired hepatic and renal function. Mental health in patients with COVID-19 was also found to be adversely affected. The burden of caring for COVID-19 survivors is likely to be huge. Therefore, it is important for policy makers to develop comprehensive strategies in providing resources and capacity in the healthcare system. Future epidemiological studies are needed to further investigate the long-term impact on COVID-19 survivors.
Micro-structural evolution and grain refinement in ANSI 304 stainless steel subjected to multiple laser shock processing (LSP) impacts were investigated by means of cross-sectional optical microscopy ...and transmission electron microscopy observations. The plastic strain-induced grain refinement mechanism of the face-centered cubic (fcc) materials with very low stacking fault energy was identified. The micro-structure was obviously refined due to the ultra-high plastic strain induced by multiple LSP impacts. The minimum grain size in the top surface was about 50–200
nm. Multidirectional mechanical twin matrix (MT)–MT intersections led to grain subdivision at the top surface during multiple LSP impacts. Furthermore, a novel structure with submicron triangular blocks was found at the top surface subjected to three LSP impacts. The grain refinement process along the depth direction after multiple LSP impacts can be described as follows: (i) formation of planar dislocation arrays (PDAs) and stacking faults along multiple directions due to the pile up of dislocation lines; (ii) formation of submicron triangular blocks (or irregularly shaped blocks) by the intersection of MT–MT (or MT–PDA or PDA–PDA) along multiple directions; (iii) transformation of MTs into subgrain boundaries; (iv) evolution by continuous dynamic recrystallization of subgrain boundaries to refined grain boundaries. The experimental results and analyses indicate that a high strain with an ultra-high strain rate play a crucial role in the grain refinement process of fcc materials subjected to multiple LSP impacts.
Asymptomatic patients, together with those with mild symptoms of coronavirus disease 2019 (COVID-19), may play an important role in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) ...transmission. However, the dynamics of virus shedding during the various phases of the clinical course of COVID-19 remains unclear at this stage.
A total of 18 patients found to be positive for SARS-CoV-2 infection by real-time reverse transcription PCR (RT-PCR) assay and admitted to Chongqing University Central Hospital between 29 January and 5 February 2020 were enrolled into this study. Medical data, pulmonary computed tomographic (CT) scan images and RT-PCR results were periodically collected during the patients' hospital stay. All participants were actively followed up for 2 weeks after discharge.
A total of nine (50%) asymptomatic patients and nine (50%) patients with mild symptoms of COVID-19 were identified at admission. Six patients (66.7%) who were asymptomatic at admission developed subjective symptoms during hospitalization and were recategorized as being presymptomatic. The median duration of virus shedding was 11.5, 28 and 31 days for presymptomatic, asymptomatic and mildly symptomatic patients, separately. Seven patients (38.9%) continued to shed virus after hospital discharge. During the convalescent phase, detectable antibodies to SARS-CoV-2 and RNA were simultaneously observed in five patients (27.8%).
Long-term virus shedding was documented in patients with mild symptoms and in asymptomatic patients. Specific antibody production to SARS-CoV-2 may not guarantee virus clearance after discharge. These observations should be considered when making decisions regarding clinical and public health, and when considering strategies for the prevention and control of SARS-CoV-2 infection.
The microstructural response and grain subdivision process in commercially pure (CP) titanium subjected to multiple laser shock peening (LSP) impacts were investigated by means of optical microscopy ...(OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. The micro-hardness curves as a function of the impact time were also determined. The deformation-induced grain refinement mechanism of the close-packed hexagonal (hcp) material by laser shock wave was subsequently analyzed. Experimental results showed that uniform equiaxed grains with an average size of less than 50 nm were generated due to the ultra-high plastic strain induced by multiple LSP impacts. Special attention was paid to four types of novel deformation-induced microstructural features, including a layered slip band in the tension deformation zone, and inverse-transformation martensite, micro-twin grating and micro-twin collision in the compression deformation zone. Furthermore, the grain refinement mechanism in the near-surface layer of CP titanium subjected to multiple LSP impacts contains two types of simultaneous subdivision modes: multi-directional mechanical twin (MT)-MT intersections at (sub)micrometer scale, and the intersection between longitudinal secondary MTs and transverse dislocation walls at nanometer scale. In addition, both grain refinement (nanocrystallization) and the existence of a small amount of inverse-transformation martensite induced by multiple LSP impacts contribute to an increase in the micro-hardness of the near-surface layer.
Display omitted
A novel coronavirus (SCoV) is the etiological agent of severe acute respiratory syndrome (SARS). SCoV-like viruses were isolated from Himalayan palm civets found in a live-animal market in Guangdong, ...China. Evidence of virus infection was also detected in other animals (including a raccoon dog, Nyctereutes procyonoides) and in humans working at the same market. All the animal isolates retain a 29-nucleotide sequence that is not found in most human isolates. The detection of SCoV-like viruses in small, live wild mammals in a retail market indicates a route of interspecies transmission, although the natural reservoir is not known.
The dispersive sweep of fast radio bursts (FRBs) has been used to probe the ionized baryon content of the intergalactic medium
, which is assumed to dominate the total extragalactic dispersion. ...Although the host-galaxy contributions to the dispersion measure appear to be small for most FRBs
, in at least one case there is evidence for an extreme magneto-ionic local environment
and a compact persistent radio source
. Here we report the detection and localization of the repeating FRB 20190520B, which is co-located with a compact, persistent radio source and associated with a dwarf host galaxy of high specific-star-formation rate at a redshift of 0.241 ± 0.001. The estimated host-galaxy dispersion measure of approximately Formula: see text parsecs per cubic centimetre, which is nearly an order of magnitude higher than the average of FRB host galaxies
, far exceeds the dispersion-measure contribution of the intergalactic medium. Caution is thus warranted in inferring redshifts for FRBs without accurate host-galaxy identifications.
In this paper, an electron donor–acceptor (D-A) substituted dipolar chromophore (BTPA-TCNE) is developed to serve as an efficient dopant-free hole-transporting material (HTM) for perovskite solar ...cells (PVSCs). BTPA-TCNE is synthesized via a simple reaction between a triphenylamine-based Michler’s base and tetracyanoethylene. This chromophore possesses a zwitterionic resonance structure in the ground state, as evidenced by X-ray crystallography and transient absorption spectroscopies. Moreover, BTPA-TCNE shows an antiparallel molecular packing (i.e., centrosymmetric dimers) in its crystalline state, which cancels out its overall molecular dipole moment to facilitate charge transport. As a result, BTPA-TCNE can be employed as an effective dopant-free HTM to realize an efficient (PCE ≈ 17.0%) PVSC in the conventional n-i-p configuration, outperforming the control device with doped spiro-OMeTAD HTM.
► Weldments were done with laser shock processing impacts after cavitation erosion. ► Laser shock processing enhanced the erosion and corrosion resistance of weldments. ► Tensile residual stress and ...surface roughness decreased by laser shock processing. ► Microstructure was observed to explain the improvement by laser shock processing. ► Obvious passivation areas occurred with laser shock processing impacts.
Effects of laser shock processing (LSP) on electrochemical corrosion resistance of weldments after cavitation erosion were investigated by X-ray diffraction (XRD) technology, scanning electron microscope (SEM), roughness tester and optical microscope (OM). Some main factors to influence erosion and corrosion of weldments, residual stresses, surface roughness, grain refinements and slip, were discussed in detail. Results show that LSP impacts can induce compressive residual stresses, decrease surface roughness, refine grains and generate the slip. Thus, the erosion and corrosion resistance with LSP impacts is improved.
Display omitted
► LSP can generate high-level compressive residual stresses and refine original grains. ► Massive LSP impacts can effectively prevent the SCC initiation of the U-bend sample. ► ...Mechanism of massive LSP impacts on SCC was also entirely revealed.
The effects of massive laser peening (LP) impacts on surface residual stress, micro-structure, and stress corrosion cracking (SCC) behaviour of U-bend samples were investigated by X-ray diffraction (XRD) technology, optical microscope (OM) and transmission electron microscope (TEM) observations. Two important factors to influence SCC initiation, residual stress and grain refinement, were discussed in detail by using different types of treatment processes. Results showed massive LP impacts can induce both deep compressive residual stress and refined grains in the surface layer of ANSI 304 stainless steel, and the corrosion mechanism of massive LP impacts on SCC was also analysed and revealed.
Delicately designed dopant‐free hole‐transporting materials (HTMs) with ordered structure have become one of the major strategies to achieve high‐performance perovskite solar cells (PSCs). In this ...work, we report two donor‐π linker‐donor (D‐π‐D) HTMs, N01 and N02, which consist of facilely synthesized 4,8‐di(n‐hexyloxy)‐benzo1,2‐b:4,5‐b′dithiophene as a π linker, with 10‐bromohexyl‐10H‐phenoxazine and 10‐hexyl‐10H‐phenoxazine as donors, respectively. The N01 molecules form a two‐dimensional conjugated network governed by C−H⋅⋅⋅O and C−H⋅⋅⋅Br interaction between phenoxazine donors, and synchronously construct a three‐dimension lamellar structure with the aid of interlaminar π–π interaction. Consequently, N01 as a dopant‐free small‐molecule HTM exhibits a higher intrinsic hole mobility and more favorable interfacial properties for hole transport, hole extraction and perovskite growth, enabling an inverted PSC to achieve a very impressive power conversion efficiency of 21.85 %.
Dipole–dipole interaction induced self‐assembly of phenoxazine‐based hole‐transporting material, N01, is achieved by introducing a hexyl bromide side‐chain to tune its self‐assembling properties. N01 exhibits a higher intrinsic hole mobility and more favorable interfacial properties for hole transport, extraction and perovskite growth, with a conversion efficiency of 21.85 % to be realized in an inverted PSC.
PDF
