The objectives of this study were to evaluate different analytical methods to determine colostrum quality in dairy cattle, including one laboratory-based method (ELISA) and 4 on-farm tests. We ...hypothesized that the colostral IgG concentration using different analytical methods, such as ELISA (mg/mL), digital Brix refractometer (% Brix), colostrometer (specific gravity and mg/mL), an outflow funnel (seconds), and a lateral flow assay (mg/mL), were highly correlated with the reference method, radial immunodiffusion (RID; mg/mL) and would generate comparable results. Colostrum samples were collected from 209 Holstein Friesian cows on 2 commercial dairy farms in Germany. Colostrum weight and colostrum temperature were measured. Test characteristics, such as optimum thresholds, sensitivity, specificity, and area under the curve (AUC) were determined using a receiver operating characteristic curve analyses for each test. Out of 209 colostrum samples assessed by RID, 186 (89%) samples had high quality (≥50 mg IgG/mL), while 23 colostrum samples (11%) showed poor quality with IgG concentrations less than 50 mg/mL. The mean IgG concentration (±SD) was 101.3 ± 45.9 mg/mL and the range was 6.0 to 244.3 mg/mL. The Pearson correlation coefficient (r) between RID and ELISA was r = 0.78. In comparison to RID, Pearson correlation coefficients for the on-farm tests were: r = 0.79 (digital Brix refractometry), r = 0.58 (colostrometer: specific gravity), r = 0.61 (colostrometer: temperature corrected), r = 0.26 (outflow funnel) and r = 0.43 (lateral flow assay), respectively. The optimal threshold to identify high-quality colostrum using ELISA was 50.8 mg/mL with sensitivity 91.3%, specificity 92.3%, and AUC of 0.94. For the on-farm tests sensitivity ranged from 95.7% (Brix refractometry) to 60.9% (lateral flow assay). Specificity ranged from 88.6% (lateral flow assay) to 75.9% (colostrometer: temperature corrected). The AUC ranged from 0.93 (Brix refractometry) to 0.73 (outflow funnel). Based on the AUC, ELISA (0.94) and Brix refractometry (0.93) can be considered highly accurate. In conclusion, the ELISA is accurate to assess colostrum quality. Regarding the on-farm tests only the digital Brix refractometer and the colostrometer were adequate to determine colostrum quality.
The objective of this study was to evaluate the effect of the nonsteroidal anti-inflammatory drug transdermal flunixin meglumine (Finadyne Transdermal) on plasma cortisol, average daily weight gain, ...and standing and lying behavior of calves, when given at the time of disbudding combined with local anesthesia. A sedative was not used to minimize pharmacological interactions. Seventy-one female Holstein Friesian calves aged 13 ± 2 d, with an average weight of 48.9 ± 4.26 kg were enrolled in the study. All calves were randomly assigned to one of 3 treatment groups: (1) control group (CON, n = 27), (2) 1-flunixin group (1-FLU, n = 26) with a single administration of transdermal flunixin meglumine at disbudding, and (3) 2-flunixin group (2-FLU, n = 24) with 2 administrations of transdermal flunixin meglumine, the first treatment at disbudding and the second 6 h after disbudding. Although the CON group received a placebo, 1-FLU and 2-FLU received flunixin meglumine transdermally. To account for plasma cortisol changes due to manipulation and handling of the calves, a sham disbudding procedure was performed one week before disbudding took place. Sham disbudding was conducted by using a cold cautery dehorner applied to each horn bud for 10 s. Disbudding was performed in a similar way by using a hot cautery dehorner. Plasma samples were collected to measure the stress biomarker cortisol at 7 different time points. Body weights were measured 4 times in 2 wk. Standing and lying behavior was assessed via 3-dimensional accelerometer. During sham disbudding and disbudding mean plasma cortisol concentrations were 6.09 ± 2.5 ng/mL and 5.16 ± 2.8 ng/mL, respectively. Treatment tended to have an effect on plasma cortisol concentrations during sham disbudding and had an effect on plasma cortisol concentrations during disbudding. Plasma cortisol concentrations were affected by treatment 2 h after disbudding in comparison to CON group. Furthermore, there was a significant effect on plasma cortisol concentrations 6 h after disbudding in contrast to CON. A return to baseline plasma cortisol levels (initial concentrations) was not achieved in CON during disbudding. There was no statistical difference between average daily weight gain and the treatment procedure. Total lying time was not affected by treatment after disbudding. In conclusion, transdermal flunixin meglumine given at the time of disbudding combined with local anesthesia decreased concentrations of the stress biomarker cortisol, but a second dose 6 h after disbudding had no further effect on plasma cortisol levels.
The objective of this study was to evaluate 2 different treatment procedures at the first milking after calving to increase colostrum quantity and to improve colostrum quality in dairy cows. We ...hypothesized that either exogenous treatment with oxytocin or the presence of the calf at first milking would lead to higher colostrum quantity and higher IgG concentration. The study was conducted from October to December 2017 on a commercial dairy farm in Germany. A total of 567 cows at the time of calving were enrolled, but for the final analyses only 521 animals were considered. The cows were randomly assigned on a daily basis into 1 of 3 groups: (1) control group (n = 177), (2) application of 20 IU of oxytocin i.m. (OXY; n = 163), and (3) presence of the calf (CA; n = 181) before and during milking. Cows in the control and oxytocin group had no contact with their calves after calving and were milked in a separate milking parlor. Cows in the oxytocin group were injected with 20 IU of oxytocin i.m. 3 min before manual stimulation. For cows in the third group, the calf was placed into a calf cart and located in front of the cow 3 min before manipulation of the cow. Colostrum quantity was determined by a digital hanging scale. The colostrum quality was assessed with digital Brix refractometry and ELISA. To evaluate the effect of 2 different treatment procedures, a generalized linear mixed model was constructed using SPSS (SPSS Inc., IBM, Ehningen, Germany). The mean (±SE) colostrum quantity was 4.17 ± 0.30 kg. The treatment procedures and the harvesting time after calving had no effect on colostrum quantity. Parity, calf birth weight, and calving time affected colostrum quantity. Cows in second parity had the lowest quantity of colostrum (3.74 ± 0.37 kg) compared with cows in parity 1 (4.75 ± 0.34 kg) and cows in parity 3 or greater (4.75 ± 0.38 kg). Cows calving during the night (2200 until 0600 h; 4.93 ± 0.37 kg) had the highest quantity of colostrum compared with cows calving in the morning (0600 until 1400 h; 4.17 ± 0.38 kg) or afternoon (1400 until 2200 h; 4.14 ± 0.34 kg). Regarding colostrum quality, 48% of the colostrum samples contained ≥50 mg of IgG/mL. The mean IgG concentration was 54.6 ± 2.80 mg of IgG/mL. Colostrum quality was affected by the treatment procedures, colostrum quantity, parity, calving time, harvesting time after calving, and the calving day during the week. Both treatment procedures (i.e., OXY with mean IgG concentration results of 57.0 mg of IgG/mL and CA with 56.0 mg of IgG/mL) resulted in higher IgG concentrations in colostrum compared with the control group (50.7 mg of IgG/mL). With increasing colostrum quantity, the colostrum quality decreased in primiparous and multiparous cows. A longer time lag between calving and milking negatively affected the colostrum quality. Concentration of IgG was higher for cows in parity 3 or greater (64.6 ± 2.59 mg of IgG/mL) compared with cows in parity 1 (48.5 ± 2.86 mg of IgG/mL) and cows in parity 2 (50.7 ± 2.89 mg of IgG/mL). Cows calving during the night had greater IgG concentrations (60.4 ± 2.92 mg of IgG/mL) compared with cows calving in the morning (51.9 ± 2.98 mg of IgG/mL) or afternoon (51.3 ± 2.71 mg of IgG/mL). Harvesting colostrum on quieter days, such as Sundays, resulted in higher IgG concentrations (61.4 ± 3.70 mg of IgG/mL). The assessment by Brix refractometry resulted in a mean result of 26.0 ± 0.20% Brix. Treatment procedures and the harvesting time after calving had no effect on colostrum quality. A negative association was observed between colostrum quantity and quality in primiparous and multiparous cows determined by Brix refractometry. Brix readings were greater for cows in parity 3 or higher (27.7 ± 0.26% Brix) compared with cows in parity 1 (25.3 ± 0.30% Brix) and cows in parity 2 (25.0 ± 0.32% Brix). In conclusion, the treatment procedure for the first milking is irrelevant to improve the quantity of colostrum. Both treatment procedures, however, increased IgG concentrations as determined by ELISA.
A long-standing ambition in ecosystem science has been to understand the relationship between ecosystem community composition, structure and function. Differential water use and hydraulic ...redistribution have been proposed as one mechanism that might allow for the coexistence of overstory woody plants and understory grasses.
Here, we investigated how patterns of hydraulic redistribution influence overstory and understory ecophysiological function and how patterns vary across timescales of an individual precipitation event to an entire growing season. To this end, we linked measures of sap flux within lateral and tap roots, leaf-level photosynthesis, ecosystem-level carbon exchange and soil carbon dioxide efflux with local meteorology data.
The hydraulic redistribution regime was characterized predominantly by hydraulic descen relative to hydraulic lift. We found only a competitive interaction between the overstory and understory, regardless of temporal time scale. Overstory trees used nearly all water lifted by the taproot to meet their own transpirational needs.
Our work suggests that alleviating water stress is not the reason we find grasses growing in the understory of woody plants; rather, other stresses, such as excessive light and temperature, are being ameliorated. As such, both the two-layer model and stress gradient hypothesis need to be refined to account for this coexistence in drylands.
The objective of this study was to evaluate different analytical methods of assessing failure of passive transfer (FPT) in neonatal calves. We hypothesized that 3 different media (i.e., centrifuged ...serum, centrifuged plasma, filtered plasma) and different analytical methods i.e., ELISA, capillary electrophoresis (CE), Brix refractometer, and handheld optical refractometer would be highly correlated with the gold standard radial immunodiffusion (RID) and would generate comparable results. Serum and plasma blood samples were collected from Holstein Friesian calves (n = 216) aged 1 to 7 d, from 2 commercial dairy herds in northeast Germany. The RID analysis showed that 59 of 216 calves (27%) had serum IgG concentrations of <10 mg/mL and 157 calves (73%) had serum concentrations of ≥10 mg/mL. The mean IgG concentration (± standard deviation) was 17.1 ± 9.8 mg/mL, and the range was 0.8 to 47.8 mg/mL. In serum, the correlation between RID and CE was r = 0.97, and between RID and ELISA was r = 0.90; CE and ELISA were also highly correlated (r = 0.89). Both refractometry methods were highly correlated with RID using centrifuged serum, centrifuged plasma, or filtered plasma (Brix refractometer: r = 0.84, 0.80, and 0.78, respectively; handheld optical refractometer: r = 0.83, 0.81, and 0.80, respectively). We determined test characteristics (optimum thresholds, sensitivity, specificity, positive predictive value, negative predictive value, and area under the curve) for CE, ELISA, and the handheld optical and digital refractometers using receiver operating characteristic curve analyses with RID as the reference value. Optimal thresholds for assessing FPT using plasma were higher than for serum, regardless of the method of plasma harvesting. The 4 different devices had comparable areas under the curve, irrespective of the medium used. All analytical methods can be used to assess FPT.
Display omitted
•SEM, EDS and FIB are employed to study corrosion in Ag-glass solar reflectors.•Polluting gases (SO2, H2S and NOx) have a great influence on reflector degradation.•For all gas ...atmospheres, the Cu-layer is the critical component. It is corroded first and protects silver.•Corrosion products and mechanisms depend on gas type, humidity and temperature•Heavy metals of the rear protective paints (Zn, Fe) also play a significant role.
Silvered-glass solar reflectors consist of a reflective layer (RL), composed of silver and copper thin-films, back-protected by paint layers on a glass plate. The RL is prone to corrosion, especially in industrial atmospheres with polluting gases. After applying accelerated aging tests with gaseous pollutants (SO2, H2S, NO2), SG-R samples are studied by SEM and EDS, including FIB preparation. As expected the copper thin-film is firstly corroded, followed by the silver corrosion. Deposits of different corrosion products were found on the reflector’s surface, depending on the polluting gas used. The rear protective paint layers also play an active role.
The objective of this study was to evaluate a filter system to harvest plasma to assess failure of passive transfer (FPT) in newborn calves. Blood samples (n = 227) for serum and plasma harvesting ...were collected via jugular vein puncture from Holstein calves aged 1 to 7 d from 4 commercial dairy herds in Northeast Germany. Serum IgG concentrations were determined using a sandwich ELISA. Failure of passive transfer was defined as IgG concentrations <10 mg/mL and used as a gold standard. One handheld optical refractometer (Euromex Holland, Arnhem, the Netherlands) and 2 digital Brix refractometers (device 1: HI 96801 digital refractometer, Hanna Instruments, Woonsocket, RI; device 2: Misco PA201, Misco, Solon, OH) were used to analyze total proteins in serum or plasma. The colostrum uptake of the calf can thus be monitored and calves with FPT can be identified. Serum was obtained through centrifugation. Plasma was obtained through either a filter system or centrifugation. For plasma filtration, approximately 2 mL of lithium heparin blood was injected into the inlet reservoir of a plasma filter (2-Drop-Filter, Pharmadoc, Lübeck, Germany) using a disposable syringe. Receiver operating characteristic curve analyses were used to determine optimum thresholds for each of the 3 devices using different media. Sixty-seven (30%) calves had FPT. For the handheld optical refractometer, the optimum threshold was 5.6 g/dL sensitivity 70.1%; specificity 80.0%; positive predictive value (PPV) 60.1%; negative predictive value (NPV) 86.2%; area under the curve (AUC) 0.85 using serum. For centrifuged plasma, the optimum threshold was 6.3 g/dL (sensitivity 82.1%; specificity 68.1%; PPV 52.5%; NPV 89.9%; AUC 0.84), and for filtered plasma, the threshold was 6.0 g/dL (sensitivity 56.7%; specificity 90.0%; PPV 70.9%; NPV 82.9%; AUC 0.80). For device 1, the optimum threshold was 8.9% Brix (sensitivity 82.1%; specificity 63.8%; PPV 48.7%; NPV 89.5%; AUC 0.81), 9.4% Brix (sensitivity 76.1%; specificity 73.7%; PPV 55.4%; NPV 87.8%; AUC 0.80), using serum and centrifuged plasma, respectively. For device 2, the optimum threshold was 8.7% Brix (sensitivity 74.6%; specificity 76.2%; PPV 57.4%; NPV 87.5%; AUC 0.83), 9.5% Brix (sensitivity 80.6%; specificity 70.6%; PPV 54.0%; NPV 89.5%; AUC 0.83), and 9.2% Brix (sensitivity 58.2%; specificity 87.5%; PPV 66.6%; NPV 83.0%; AUC 0.80) using serum, centrifuged plasma, and filtered plasma, respectively. Based on the AUC, the 3 devices yielded comparable test characteristics to identify calves with FPT. In conclusion, a filter system can be used to facilitate the evaluation of FPT as a point of care technique in calves without the need for serum centrifugation.
Aims: To describe an unusual endophthalmitis-like reaction after an intravitreal injection of triamcinolone acetonide in four patients. Methods: Retrospective case series. Results: Four patients are ...reported with an endophthalmitis-like reaction following an intravitreal injection of triamcinolone acetonide. There was a dense vitreous haze with severe reduction of fundus view in all cases. One case was treated as an infectious endophthalmitis but the vitreous tap showed no evidence of an endophthalmitis and no bacterial or fungal growth in culture. In all four cases, the vitreous haze cleared without specific treatment. The anterior chamber remained quiet in all cases but one, which was examined 30 minutes after the injection, and there was no periorbital inflammation or pain. Conclusion: Pseudo-endophthalmitis after an intravitreal injection of triamcinolone acetonide seems to be a distinct clinical entity that may resolve without specific treatment.
Given the importance that concentrating solar power technologies have had in recent years, the interaction between humid atmospheres in which SO2 is the main pollutant and the metal reflecting layers ...of the solar concentrators is a major concern that should be addressed. Previous durability studies have urged the importance of designing an accelerated aging test protocol for simulating aggressive industrial atmospheres that solar reflector materials are bound to encounter. Therefore, three types of reflectors were tested in an acid-rain (or Kesternich) chamber at various temperatures and gas concentrations based on the DIN 50018 and ISO 6988 standards. The results showed the significant effect of high SO2 concentrations rather than high temperatures on silvered-glass reflectors, although synergy should not be disregarded. Strong reductions in specular reflectance were found for one type of silvered reflector compared to another type, highlighting the significance of material processing and its effects on their final performance. Aluminum reflectors were not damaged as much as silvered-glass reflectors, but under microscopic inspection, a wide range of noticeable corrosion defects could be found in all the materials. Comparisons between the most representative Kesternich test and samples from an outdoor industrial site permitted realistic lifetime correlations for commercial silvered-glass reflectors.
Main corrosion features that appeared in the reflective area of Type 1 silvered-glass reflectors at the end of the different corrosion tests. K_0_25 is the test at 0 dm3 SO2, 25 °C, K_0_40 is the test at 0 dm3 SO2, 40 °C, K_0_50 is the test at 0 dm3 SO2, 50 °C, K_0.2_40 is the test at 0.2 dm3 SO2, 40 °C, K_1_25 is the test at 1 dm3 SO2, 25 °C, K_1_40 is the test at 1 dm3 SO2, 40 °C, K_1_50 is the test at 1 dm3 SO2, 50 °C, K_2_40 is the test at 2 dm3 SO2, 40 °C, N is the sum of the number of corrosion spots visible to the naked eye at the end of testing on a 300 cm2 total reflector surface, Max. Pen. is the maximum penetration of corrosion near the edge (μm), Δρλ,φ is the mean increment in monochromatic specular reflectance on reflector surfaces not predamaged (-), Total Corr. is the mean total corrosion of the whole reflector surface (%). Display omitted
•Suggested Kesternich tests for reflectors are 1 dm3 SO2 at 50 °C, 2 dm3 SO2 at 40 °C.•2 dm3 SO2 at 40 °C test implies an acceleration factor of 57 compared to a real site.•Major degradation appeared in Type 1 reflectors after the most aggressive tests.•Undamaged Type 2 reflectors had more and larger corrosion spots than Type 1.•Aluminum reflectors were corroded in a lower degree than silvered-glass reflectors.
Display omitted
•Sulphurous atmospheres do harm the performance of certain CSP reflectors.•Traditional measurements do not detect almost any reflectance loss after the ageing.•The main degradation ...pattern in silvered glass reflectors are corrosion spots.•EDS microanalyses reveal the reaction between the H2S and the silver layer.•Aluminium reflectors do not corrode in the presence of the sulphurous gas.
The degradation of reflector materials for concentrating solar thermal applications is analysed. Corrosion of their metallic reflective layer is considered a major problem in facilities which are located near industrial sites, where reduced sulphur gases may be present. Accelerated ageing tests were performed to study the influence of H2S on the corrosion of two types of silvered glass reflectors and one aluminium reflector. Different degradation patterns were found for silvered glass reflectors, whereas aluminium reflectors did not corrode in the presence of the sulphurous gas. Therefore, industrial pollution caused by this type of gas may decrease the solar collectors’ performance.
PDF
