In the course of the Fukushima nuclear accident, radionuclides were released in various forms, including so-called radiocesium-bearing microparticles (CsMP). So far, four types of CsMP were ...described: Type A is smaller in size (< 10 μm), Types B, C, and D are larger (> 100 μm). In this work, we present a novel type of CsMP (proclaimed Type E). Three particles of Type E were extracted from a contaminated blade of grass that was sampled 1.5 km from the Fukushima Daiichi nuclear power plant in late 2011. They were located using autoradiography, isolated using an optical microscope and micromanipulator, and characterized using scanning electron microscopy, energy dispersive x-ray spectroscopy, and low-level gamma-ray spectrometry. Type E CsMPs are 10–20 μm in size and exhibit an unusually low and barely detectable
137
Cs activity of only ≤ 10 mBq per particle. Their brittle and fragile character may indicate a high surface tension.
The plutonium rapid response in vitro bioassay method described here was designed to determine
238
Pu,
239
Pu, and
240
Pu concentration in urine samples from workers with potential internal ...contamination. Results provide quick and actionable information about the level of contamination necessary to assist making further medical decisions, including chelation therapy. The radiochemical procedure can be performed within approximately 48 h, including sample preparation, measurement(s) by alpha spectrometry and/or inductively coupled plasma mass spectrometry (ICP-MS), and data evaluation.
A nuclear forensics investigation involving a uranium ore concentrate relies on accurate and precise analysis of impurities. Analytical data defensibility requires the use of reference materials as ...part of quality control. This study presents a compilation of trace element concentration results of the CUP-2 Uranium Ore Concentrate Standard measured by 11 different laboratories. The laboratories employed various dissolution methods, analytical preparation methods, and instrumental platforms. The data presented here contain concentrations of 66 impurities with up to 138 individual data points for each impurity. Consensus values have been assigned to each impurity following a statistical analysis of the data set.
Co-Re alloy development is prompted by the search for new materials for future gas turbines which can be used at temperatures considerably higher than the current day single crystal Ni-based ...superalloys. The Co-Re-based alloys have been designed to have very high melting range, and they are meant for application at +373 K (+100 °C) above Ni-superalloys. They are significantly different from the conventional Co-based alloys that are used in static components of today’s gas turbines, and the Co-Re alloys have never been used for structural applications before. The Co-Re-Cr system has complex microstructure with many different phases present. Phase transformations and stabilities of fine strengthening precipitates at high temperatures remain mostly unexplored in the Co-Re alloys, and to develop basic understanding, model ternary and quaternary compositions were studied within the alloy development program.
In situ
neutron and synchrotron measurements at high temperatures were extensively used for this purpose, and some recent results from the
in situ
measurements are presented. In particular, the effect of boron doping in Co-Re alloys and the stabilities of the fine TaC precipitates at high temperatures were investigated. A fine dispersion of TaC precipitates strengthens some Co-Re alloys, and their stabilities at the application temperatures are critical. In the beginning, the alloy development strategy is very briefly discussed.
A glovebox breach at the plutonium facility at Los Alamos National Laboratory potentially exposed 15 individuals to 238 Pu aerosols. One of the individuals (P0) received two 1-g intravenous DTPA ...treatments, one on the day of the intake and another the following day. Several urine samples were collected from the individuals involved in the incident. Particle size analysis on the PPE and solubility analysis of the particles on a filter sample were conducted in vitro. The applicability of the results from the in vitro studies for dose assessment was questionable because of the effect of the cloth mask the workers were wearing for COVID-related protection. Based on several considerations, including the effect of cloth masks on the "effective" particle size inhaled and the analysis of fecal-to-urine ratio, the default Type M 1 μm AMAD model was used to estimate intakes and doses. Using the urinary excretion data collected after 100 d post last chelation treatment, the committed effective dose, E(50), for P0 was calculated to be 5.2 mSv. For all others, the bioassay data were consistent with no intakes or very small intakes corresponding to E(50) less than 0.1 mSv.
In the course of the Fukushima nuclear accident, radionuclides were released in various forms, including so-called radiocesium-bearing microparticles (CsMP). So far, four types of CsMP were ...described: Type A is smaller in size (< 10 μm), Types B, C, and D are larger (> 100 μm). In this work, we present a novel type of CsMP (proclaimed Type E). Three particles of Type E were extracted from a contaminated blade of grass that was sampled 1.5 km from the Fukushima Daiichi nuclear power plant in late 2011. They were located using autoradiography, isolated using an optical microscope and micromanipulator, and characterized using scanning electron microscopy, energy dispersive x-ray spectroscopy, and low-level gamma-ray spectrometry. Type E CsMPs are 10–20 μm in size and exhibit an unusually low and barely detectable 137Cs activity of only ≤ 10 mBq per particle. Their brittle and fragile character may indicate a high surface tension.
Herein, a nuclear forensics investigation involving a uranium ore concentrate relies on accurate and precise analysis of impurities. Analytical data defensibility requires the use of reference ...materials as part of quality control. This study presents a compilation of trace element concentration results of the CUP-2 Uranium Ore Concentrate Standard measured by 11 different laboratories. The laboratories employed various dissolution methods, analytical preparation methods, and instrumental platforms. The data presented here contain concentrations of 66 impurities with up to 138 individual data points for each impurity. Consensus values have been assigned to each impurity following a statistical analysis of the data set.
The accuracy and precision of the determination of (238)Pu amount at the fg (mBq) level by a combination of alpha spectrometry and inductively coupled plasma mass spectrometry (ICP-MS) were studied ...using a standard reference material (CRM 137-Plutonium corrected Isotopic Standard, National Bureau of Standards, Washington, D.C., USA). The activity of (238)Pu was calculated from the amount of (239)Pu and (240)Pu obtained by isotope dilution method and ICP-MS combined with the intensity ratio of (238)Pu/(239,240)Pu obtained by alpha spectrometry without adding spike. The results show that approximately 130 fg of (238)Pu can be analyzed within an accuracy of 7% bias and with 5-12% of total uncertainty. The examined analytical procedure was applied to the quantitative analysis of (238)Pu in water samples representing Safeguards inspection samples. The combination of alpha spectrometry and ICP-MS is useful for quantitative and isotopic analysis in low-level Pu samples. Also the method leads to improving the accuracy of (238)Pu determination because efficiency calibration is not necessary for alpha spectrometry.
